没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
TEF668XA User Manual
Device version /V205
Rev. 1.6 — 18 August 2016
User Manual
Document information
Info
Content
Keywords
Lithio, TEF6686A, TEF6687A, TEF6688A, TEF6689A, /V205, firmware
5.00, API, I²C bus, control, car radio
Abstract
Overview of TEF668XA series device control
NXP Semiconductors
TEF668XA User Manual
TEF6686A, TEF6687A, TEF6688A and TEF6689A, /V205
doc
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2016. All rights reserved.
User Manual
Rev. 1.6 — 18 August 2016
2 of 143
Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Revision history
Rev
Date
Description
‘Lithio’ TEF6686A, TEF6687A, TEF6688A and TEF6689A, device version V205, user
manual
Description of the TEF668XA /V205 control interface (API) and related information
1.6
20160818
Changes from Rev. 1.5 indicated by change bar
3.1 extension of FM tuning range to 64 MHz (p5.10)
6.2.1, 6.2.2, 6.2.3 updated V205 required initialization (p5.10)
6.3.4 moved command control state column next to default states
1.5
20160624
6.3.4 new chapter with overview of digital I/O pin mode defaults and control
5.7.1 added FF FBh return code indication of invalid parameter write attempt
1.4
20160414
- FM and AM module commands in separate sections with cross references
3.1.1 added information on End mute and not critical tuning control time
3.26 added description of introduced test option use with audio input select
4 corrected valid read data
4.1.1 added application information on FM quality detector timing and use
4.7.1 added application information on AM quality detector timing and use
4.16, 7 added read information of internal radio sample rate
6.2.1, 6.2.2, 6.2.3 updated V205 required initialization (p5.09)
6.3.2 included GPIO_3 in pin state description
1.2
20151216
3.1.1 added information on band change tuning time
3.17 added optional independent limit setting of FM softmute on noise and multipath
3.25 added current output level selection options
3.26 added note detail
3.53 added current output level selection options
6.2.1, 6.2.2, 6.2.3 updated V205 required initialization (p5.05)
6.3.1, 6.3.2, 6.3.3 description of reset condition for all three operation states
6.3.2, 6.3.3 added details on default pin state and configuration
1.1
20151006
3.8 corrected offset description range and default
6.2.1, 6.2.2, 6.2.3 updated V205 required initialization (p5.02)
1.0
20150910
6.2.1, 6.2.2, 6.2.3 added V205 required initialization (p5.01)
0.6
20150723
Device version V205
Changes from the previous device version V102 user manual Rev 1.8 (= V102 p2.23):
- Updated references to V205 (= firmware version 5.00)
- Additional changes:
3, 4, 5.2, 5.7.1, 5.7.2 added information on new supported use of command index
3.5 added new FM antenna attenuation control and ‘FM-off’ input impedance control
3.13, 3.14, 3.18, 7 added new features Set_Highcut_Fix and Set_Lowcut_Fix
3.22 added new option of RDS data buffer flush
3.22, 4.2.1 added new feature of FM FULL SEARCH extended RDS reception
NXP Semiconductors
TEF668XA User Manual
TEF6686A, TEF6687A, TEF6688A and TEF6689A, /V205
doc
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2016. All rights reserved.
User Manual
Rev. 1.6 — 18 August 2016
3 of 143
Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Revision history
Rev
Date
Description
3.25 added new current output (‘virtual ground’) option for DR signal pins
3.53 added new current output (‘virtual ground’) option for audio I
2
S signal pins
3.57, 4.13 added new GPIO 3 (with limitation note on audio I
2
S use case)
3.58, 5.1 added new 55.46667 MHz crystal option (requires pull-up application)
3.58 removed restriction on 4 MHz crystal use; now also available for digital radio
4.14 adapted version identification to V205
6.2.1, 6.2.2, 6.2.3 initialization sequence example and list of new features for V205
7 separated command overview of FM and AM module
NXP Semiconductors
TEF668XA User Manual
TEF6686A, TEF6687A, TEF6688A and TEF6689A, /V205
doc
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2016. All rights reserved.
User Manual
Rev. 1.6 — 18 August 2016
4 of 143
1. Introduction
TEF668XA (‘Lithio’) is a series of unparalleled single-chip car radio devices with an upper
mainstream to high-end performance and feature set. The Lithio series consists of four
variants; TEF6686A, TEF6687A, TEF6688A and TEF6689A.
All Lithio variants offer worldwide FM band reception as well as full AM band reception up
to 27 MHz. In addition to the TEF6686A feature set the variants TEF6687A and
TEF6689A (Lithio FMSI and Lithio FMSI DR) offer the added performance of extended
FM stereo reception and the new improved ‘FULL SEARCH’ RDS data reception. The
variants TEF6688A and TEF6689A (Lithio DR and Lithio FMSI DR) offer connectivity and
support for digital radio reception in the AM and FM bands.
This user manual describes the TEF668XA series control interface or API (Application
Programming Interface). The document describes the available write and read
commands with parameter and data definitions.
This document version contains limited background information regarding the feature
functionality and the offered control options so some general knowledge of car radio
functions is required.
This user manual describes the functionality and control of the TEF668XA device version
V205 specifically (TEF668XA/V205).
2. Control interface
2.1 Overview
The TEF668XA devices are equipped with an I²C bus interface for control of the device.
Full control of the device functions and features is available using this single interface.
The I²C bus supports bit rates of up to 400 kbit/s in accordance with the ‘fast mode’ I²C
bus specification.
The control interface is described in this document on an abstract ‘application’ level as
well as on I²C protocol level.
TEF668XA device variants are fully control compatible, although differing in available
features. Future derivatives of these devices will remain compatible also but possibly with
a different variation and extension in supported functions and features.
The TEF668XA interface definition is compatible also with the TEF665XA (Atomic-2) and
TEF701XA (Sabre) series of devices, although differing in available commands reflecting
the available functionality. The interface is compatible with the TEA685XA (Tiger-2)
series as well.
NXP Semiconductors
TEF668XA User Manual
TEF6686A, TEF6687A, TEF6688A and TEF6689A, /V205
doc
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2016. All rights reserved.
User Manual
Rev. 1.6 — 18 August 2016
5 of 143
The API template of TEF668XA and compatible devices will be used in future NXP car-
radio developments also, offering familiar control with an additional variation in supported
functions and features.
Via the I²C bus commands and parameters can be written to the device and information
can be read from the device.
TEF668XA control is organized in modules. Modules are independent functional blocks
that can be regarded sub-devices within the main device.
The TEF668XA consists of four modules:
module 32 : FM = FM radio reception
module 33 : AM = LW, MW and SW radio reception
module 48 : AUDIO = Audio processing
module 64 : APPL = System and application control
Different modules can be controlled independently even when the addressed module
itself is inactive at the time of control. This allows modules to be prepared and initialized
before use.
Compatible command definitions are used for the modules of FM and AM radio where
applicable. Defaults and range definitions may differ to fit the different band properties.
Module commands contain parameters for control of behavior and option selections.
The control is organized in such a way that devices can support writing of a single
parameter up to writing of all parameters available for a given command.
Device version V205 does indeed offer this flexibility and allows writing of a specific
parameter or a range of parameters.
The parameter ranges as depicted in this document are the guaranteed ranges for
operation. Control outside of these ranges is not allowed for application.
The command parameters in general allow for a higher range and granularity than what
is available from TEF668XA. Parameters can be set to any value within the documented
range even where the actual number of available settings is less than offered by the
parameter. In these cases the TEF668XA will realize the nearest available setting.
Fig 1 represents the TEF668XA control interface as seen from the host controller.
剩余142页未读,继续阅读
资源评论
- m0_681546212023-05-01Perfect, thank you very much, please also upload older versions (1.4 20160414) of this document if you have it, I will buy it as I require patch p5.09
wadever
- 粉丝: 19
- 资源: 2
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- 广联达数维建模平台GDMP平台培训视频Part2-Element框架
- XXXX智慧园区解决方案为三个部分:园区基础网络平台、园区管理平台及园区服务平台
- matlab模糊控制49规则
- MEM2310M3G-VB一款SOT23封装N-Channel场效应MOS管
- MEM2307XG-VB一款SOT23封装P-Channel场效应MOS管
- 广联达数维建模平台GDMP平台培训视频Part1-Ndb底层
- MEM2307-VB一款SOT23封装P-Channel场效应MOS管
- 逐次分半积分实验.wps
- MEM2303XG-VB一款P-Channel沟道SOT23的MOSFET晶体管参数介绍与应用说明
- MEM2303-VB一款P-Channel沟道SOT23的MOSFET晶体管参数介绍与应用说明
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功