nuvotonN76E003BSPKeil_C51_新唐MCUkeil资源-CSDN文库

共1094个文件

lst：279个

obj：241个

m51：69个

N76E003

4星 · 超过85%的资源需积分: 50 152 浏览量 2018-02-03 15:50:02 上传评论 1 收藏 10.06MB ZIP 举报

资源推荐

资源详情

资源评论

收起资源包目录

nuvoton N76E003 BSP Keil_C51 （1094个子文件）

UID_check.__b 120B

Version.__i 178B

xRAM_768byte.__i 140B

xRAM_256.__i 128B

testw77.__i 125B

STARTUP.A51 5KB

ADC 193KB

ADC 162KB

ADC_Bandgap 244KB

ADC_IO 163KB

ADC_PWM 163KB

ADC_Simple 244KB

ADC_Simple 161KB

IAP_CONFIG.uvgui_LCWANG0.bak 70KB

run.bat 18B

Unkonw_APROM0.bin 18KB

isp_ld.bin 2KB

WDT.bin 242B

Capture.c 15KB

I2C_EEPROM.c 13KB

PWM.C 9KB

PWM.c 8KB

I2C_M.c 8KB

PWM.c 8KB

GPIO_LED.C 8KB

SPI_Flash.c 7KB

Pin_Int.C 7KB

GPIO.C 7KB

ISP_LD-AP.c 7KB

IAP_DATAFLASH.c 7KB

SPI_Master_Int.c 7KB

IAP_APproLD.c 7KB

ADC.C 7KB

SPI_Slave_Int.c 6KB

SPI_Master_Po.c 6KB

SPI_Slave_Po.c 5KB

ADC.C 5KB

Delay.c 5KB

ADC.C 5KB

I2C_S.c 5KB

ADC.C 4KB

Common.c 4KB

Capture.c 4KB

IAP_DATAFLASH.c 4KB

Timer01_M0.c 4KB

Timer01_M3.c 4KB

Timer01_M1.c 4KB

IAP_BYTE.c 4KB

Timer01_M2.c 4KB

UART1.c 4KB

ADC.C 4KB

Fsys_SEL.c 3KB

WDT.c 3KB

UART0.c 3KB

UART0_mode_3.c 3KB

WKT_INT.c 2KB

Timer3.c 2KB

IAP_MHIRC.C 2KB

IAP_RBGtrim.C 2KB

UCID_check.C 2KB

CLK_OUT.c 2KB

UID_check.C 2KB

xRAM_768byte.c 1KB

UID_check.C 858B

UID_check.C 679B

Capture 196KB

Capture 164KB

CLK_OUT 189KB

CLK_OUT 160KB

hex2bin.exe 28KB

FSYS_SEL 243KB

GPIO 242KB

SFR_Macro.h 48KB

Function_Define.h 39KB

N76E003.h 6KB

Common.h 1KB

Timer01.h 863B

Delay.h 275B

UCID_check.h 22B

UID_check.h 21B

UID_check.hex 11KB

I2C_EEPROM.hex 10KB

ISP_AP-AP.hex 8KB

SPI_Flash.hex 8KB

共 1094 条

/*---------------------------------------------------------------------------------------------------------*/ /* */ /* Copyright(c) 2017 Nuvoton Technology Corp. All rights reserved. */ /* */ /*---------------------------------------------------------------------------------------------------------*/ //*********************************************************************************************************** // Nuvoton Technoledge Corp. // Website: http://www.nuvoton.com // E-Mail : MicroC-8bit@nuvoton.com // Date : Apr/21/2017 //*********************************************************************************************************** //*********************************************************************************************************** // File Function: N76E003 Timer2 Capture Mode demo code //*********************************************************************************************************** #include "N76E003.h" #include "Common.h" #include "Delay.h" #include "SFR_Macro.h" #include "Function_define.h" //***************** The Following is in define in Fucntion_define.h *************************** //****** Always include Function_define.h call the define you want, detail see main(void) ******* //*********************************************************************************************** #if 0 ////-------------------- Timer2 Capture define -------------------- ////--- Falling Edge ----- //#define IC0_P12_CAP0_FallingEdge_Capture CAPCON1&=0xFC;CAPCON3&=0xF0;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4 //#define IC1_P11_CAP0_FallingEdge_Capture CAPCON1&=0xFC;CAPCON3&=0xF0;CAPCON3|=0x01;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4 //#define IC2_P10_CAP0_FallingEdge_Capture CAPCON1&=0xFC;CAPCON3&=0xF0;CAPCON3|=0x02;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4 //#define IC3_P00_CAP0_FallingEdge_Capture CAPCON1&=0xFC;CAPCON3&=0xF0;CAPCON3|=0x03;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4 //#define IC3_P04_CAP0_FallingEdge_Capture CAPCON1&=0xFC;CAPCON3&=0xF0;CAPCON3|=0x04;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4 //#define IC4_P01_CAP0_FallingEdge_Capture CAPCON1&=0xFC;CAPCON3&=0xF0;CAPCON3|=0x05;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4 //#define IC5_P03_CAP0_FallingEdge_Capture CAPCON1&=0xFC;CAPCON3&=0xF0;CAPCON3|=0x06;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4 //#define IC6_P05_CAP0_FallingEdge_Capture CAPCON1&=0xFC;CAPCON3&=0xF0;CAPCON3|=0x07;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4 //#define IC7_P15_CAP0_FallingEdge_Capture CAPCON1&=0xFC;CAPCON3&=0xF0;CAPCON3|=0x08;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4 //#define IC0_P12_CAP1_FallingEdge_Capture CAPCON1&=0xF3;CAPCON3&=0x0F;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5 //#define IC1_P11_CAP1_FallingEdge_Capture CAPCON1&=0xF3;CAPCON3&=0x0F;CAPCON3|=0x10;CAPCON0|=SET_BIT5;CAPCON0|=SET_BIT5 //#define IC2_P10_CAP1_FallingEdge_Capture CAPCON1&=0xF3;CAPCON3&=0x0F;CAPCON3|=0x20;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5 //#define IC3_P00_CAP1_FallingEdge_Capture CAPCON1&=0xF3;CAPCON3&=0x0F;CAPCON3|=0x30;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5 //#define IC3_P04_CAP1_FallingEdge_Capture CAPCON1&=0xF3;CAPCON3&=0x0F;CAPCON3|=0x40;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5 //#define IC4_P01_CAP1_FallingEdge_Capture CAPCON1&=0xF3;CAPCON3&=0x0F;CAPCON3|=0x50;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5 //#define IC5_P03_CAP1_FallingEdge_Capture CAPCON1&=0xF3;CAPCON3&=0x0F;CAPCON3|=0x60;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5 //#define IC6_P05_CAP1_FallingEdge_Capture CAPCON1&=0xF3;CAPCON3&=0x0F;CAPCON3|=0x70;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5 //#define IC7_P15_CAP1_FallingEdge_Capture CAPCON1&=0xF3;CAPCON3&=0x0F;CAPCON3|=0x80;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5 //#define IC0_P12_CAP2_FallingEdge_Capture CAPCON1&=0x0F;CAPCON4&=0xF0;CAPCON0|=SET_BIT6;CAPCON2|=SET_BIT6 //#define IC1_P11_CAP2_FallingEdge_Capture CAPCON1&=0x0F;CAPCON4&=0xF0;CAPCON4|=0x10;CAPCON0|=SET_BIT6;CAPCON2|=SET_BIT6 //#define IC2_P10_CAP2_FallingEdge_Capture CAPCON1&=0x0F;CAPCON4&=0xF0;CAPCON4|=0x20;CAPCON0|=SET_BIT6;CAPCON2|=SET_BIT6 //#define IC3_P00_CAP2_FallingEdge_Capture CAPCON1&=0x0F;CAPCON4&=0xF0;CAPCON4|=0x30;CAPCON0|=SET_BIT6;CAPCON2|=SET_BIT6 //#define IC3_P04_CAP2_FallingEdge_Capture CAPCON1&=0x0F;CAPCON4&=0xF0;CAPCON4|=0x40;CAPCON0|=SET_BIT6;CAPCON2|=SET_BIT6 //#define IC4_P01_CAP2_FallingEdge_Capture CAPCON1&=0x0F;CAPCON4&=0xF0;CAPCON4|=0x50;CAPCON0|=SET_BIT6;CAPCON2|=SET_BIT6 //#define IC5_P03_CAP2_FallingEdge_Capture CAPCON1&=0x0F;CAPCON4&=0xF0;CAPCON4|=0x60;CAPCON0|=SET_BIT6;CAPCON2|=SET_BIT6 //#define IC6_P05_CAP2_FallingEdge_Capture CAPCON1&=0x0F;CAPCON4&=0xF0;CAPCON4|=0x70;CAPCON0|=SET_BIT6;CAPCON2|=SET_BIT6 //#define IC7_P15_CAP2_FallingEdge_Capture CAPCON1&=0x0F;CAPCON4&=0xF0;CAPCON4|=0x80;CAPCON0|=SET_BIT6;CAPCON2|=SET_BIT6 ////----- Rising edge ---- //#define IC0_P12_CAP0_RisingEdge_Capture CAPCON1&=0xFC;CAPCON1|=0x01;CAPCON3&=0xF0CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4; //#define IC1_P11_CAP0_RisingEdge_Capture CAPCON1&=0xFC;CAPCON1|=0x01;CAPCON3&=0xF0;CAPCON3|=0x01;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4; //#define IC2_P10_CAP0_RisingEdge_Capture CAPCON1&=0xFC;CAPCON1|=0x01;CAPCON3&=0xF0;CAPCON3|=0x02;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4; //#define IC3_P00_CAP0_RisingEdge_Capture CAPCON1&=0xFC;CAPCON1|=0x01;CAPCON3&=0xF0;CAPCON3|=0x03;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4; //#define IC3_P04_CAP0_RisingEdge_Capture CAPCON1&=0xFC;CAPCON1|=0x01;CAPCON3&=0xF0;CAPCON3|=0x04;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4; //#define IC4_P01_CAP0_RisingEdge_Capture CAPCON1&=0xFC;CAPCON1|=0x01;CAPCON3&=0xF0;CAPCON3|=0x05;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4; //#define IC5_P03_CAP0_RisingEdge_Capture CAPCON1&=0xFC;CAPCON1|=0x01;CAPCON3&=0xF0;CAPCON3|=0x06;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4; //#define IC6_P05_CAP0_RisingEdge_Capture CAPCON1&=0xFC;CAPCON1|=0x01;CAPCON3&=0xF0;CAPCON3|=0x07;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4; //#define IC7_P15_CAP0_RisingEdge_Capture CAPCON1&=0xFC;CAPCON1|=0x01;CAPCON3&=0xF0;CAPCON3|=0x08;CAPCON0|=SET_BIT4;CAPCON2|=SET_BIT4; //#define IC0_P12_CAP1_RisingEdge_Capture CAPCON1&=0xF3;CAPCON1|=0x04;CAPCON3&=0x0FCAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5; //#define IC1_P11_CAP1_RisingEdge_Capture CAPCON1&=0xF3;CAPCON1|=0x04;CAPCON3&=0x0F;CAPCON3|=0x10;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5; //#define IC2_P10_CAP1_RisingEdge_Capture CAPCON1&=0xF3;CAPCON1|=0x04;CAPCON3&=0x0F;CAPCON3|=0x20;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5; //#define IC3_P00_CAP1_RisingEdge_Capture CAPCON1&=0xF3;CAPCON1|=0x04;CAPCON3&=0x0F;CAPCON3|=0x30;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5; //#define IC3_P04_CAP1_RisingEdge_Capture CAPCON1&=0xF3;CAPCON1|=0x04;CAPCON3&=0x0F;CAPCON3|=0x40;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5; //#define IC4_P01_CAP1_RisingEdge_Capture CAPCON1&=0xF3;CAPCON1|=0x04;CAPCON3&=0x0F;CAPCON3|=0x50;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5; //#define IC5_P03_CAP1_RisingEdge_Capture CAPCON1&=0xF3;CAPCON1|=0x04;CAPCON3&=0x0F;CAPCON3|=0x60;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5; //#define IC6_P05_CAP1_RisingEdge_Capture CAPCON1&=0xF3;CAPCON1|=0x04;CAPCON3&=0x0F;CAPCON3|=0x70;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5; //#define IC7_P15_CAP1_RisingEdge_Capture CAPCON1&=0xF3;CAPCON1|=0x04;CAPCON3&=0x0F;CAPCON3|=0x80;CAPCON0|=SET_BIT5;CAPCON2|=SET_BIT5; //#define IC0_P12_CAP3_RisingEdge_Capture CAPCON1&=0x0F;CAPCON1|=0x10;CAPCON4&=0xF0;CAPCON0|=SET_BIT6;CAPCON2|=SET_BIT6; //#define IC1_P11_CAP3_RisingEdge_Capture CAPCON1&=0x0F;CAPCON1|=0x10;CAPCON4&=0xF0;CAPCON4|=0x01;CAPCON0|=SET_BIT6;CAPCON2|=SET_BIT6; //#define IC2_P10_CAP3_RisingEdge_Capture CAPCON1&=0x0F;CAPCON1|=0x10;CAPCON4&=0xF0;CAPCON4|=0x02;CAPCON0|=SET_BIT6;CAPCON2|=SET_BIT6; //#define IC3_P00_CAP3_RisingEdge_Capture CAPCON1&=0x0F;CAPCON1|=0x10;CAPCON4&=0xF0;CAPCON4|=0x03;CAPCON0|=SET_B

评论收藏

内容反馈