delphi 7-delphixe11 unidac控件 源码安装

Universal Data Access Components Copyright 2008-2022, Devart. All Rights Reserved -------------------------------------------------- Demo for FastReport included in UniDAC was built and tested using Fast Report 5 Note: Fast Query Builder of FastReport is disabled by default. To enable it you should uncomment the following line in the frx.inc file in the FastReport installation directory: //{$DEFINE QBUILDER} IMPORTANT NOTE: Demo is provided as is, and there is no warranty that it is fully compatible with other versions of Fast Report. Before using Demo you should install FastReport 5 UniDAC Components. The following instruction will help you to compile and install FastReport 5 UniDAC Components manually using IDE. Delphi and C++Builder -------------------------------- For FastReport VCL, run your IDE and walk through the following steps: 1) Compile DAC run-time package (frxDACXX.dpk) 2) Compile UniDAC run-time package (frxUniDACXX.dpk) 3) Compile and install UniDAC design-time package (dclfrxUniDACXX.dpk) The VCL folder contains packages for FastReport 4 and FastReport 5: Demos\ThirdParty\FastReport\VCL\Delphi7\*.dpk - for Delphi 7 Demos\ThirdParty\FastReport\VCL\Delphi9\*.dpk - for Delphi 2005 Demos\ThirdParty\FastReport\VCL\Delphi10\*.dpk - for Delphi 2006 Demos\ThirdParty\FastReport\VCL\Delphi11\*.dpk - for Delphi 2007 Demos\ThirdParty\FastReport\VCL\Delphi12\*.dpk - for Delphi 2009 Demos\ThirdParty\FastReport\VCL\Delphi14\*.dpk - for Delphi 2010 Demos\ThirdParty\FastReport\VCL\Delphi15\*.dpk - for Delphi XE Demos\ThirdParty\FastReport\VCL\Delphi16\*.dpk - for Delphi XE2 Demos\ThirdParty\FastReport\VCL\Delphi17\*.dpk - for Delphi XE3 Demos\ThirdParty\FastReport\VCL\Delphi18\*.dpk - for Delphi XE4 Demos\ThirdParty\FastReport\VCL\Delphi19\*.dpk - for Delphi XE5 Demos\ThirdParty\FastReport\VCL\Delphi20\*.dpk - for Delphi XE6 Demos\ThirdParty\FastReport\VCL\Delphi21\*.dpk - for Delphi XE7 Demos\ThirdParty\FastReport\VCL\Delphi22\*.dpk - for Delphi XE8 Demos\ThirdParty\FastReport\VCL\Delphi23\*.dpk - for Delphi 10 Seattle Demos\ThirdParty\FastReport\VCL\Delphi24\*.dpk - for Delphi 10.1 Berlin Demos\ThirdParty\FastReport\VCL\Delphi25\*.dpk - for Delphi 10.2 Tokyo Demos\ThirdParty\FastReport\VCL\Delphi26\*.dpk - for Delphi 10.3 Rio Demos\ThirdParty\FastReport\VCL\Delphi27\*.dpk - for Delphi 10.4 Sydney Demos\ThirdParty\FastReport\VCL\Delphi28\*.dpk - for Delphi 11 Alexandria To compile applications based on FastReport 4 or FastReport 5 UniDAC Components, add the following path to the "Library Path": %UniDAC%\Demos\ThirdParty\FastReport\VCL\ where %UniDAC% is the UniDAC installation path on your computer. For FastReport FMX, run your IDE and walk through the following steps: 1) Compile DAC run-time package (frxFmxDACXX.dpk) 2) Compile IBDAC run-time package (frxFmxUniDACXX.dpk) 3) Compile and install IBDAC design-time package (dclfrxFmxUniDACXX.dpk) The FMX folder contains packages for FastReport FMX: Demos\ThirdParty\FastReport\FMX\Delphi16\*.dpk - for Delphi XE2 Demos\ThirdParty\FastReport\FMX\Delphi17\*.dpk - for Delphi XE3 Demos\ThirdParty\FastReport\FMX\Delphi18\*.dpk - for Delphi XE4 Demos\ThirdParty\FastReport\FMX\Delphi19\*.dpk - for Delphi XE5 Demos\ThirdParty\FastReport\FMX\Delphi20\*.dpk - for Delphi XE6 Demos\ThirdParty\FastReport\FMX\Delphi21\*.dpk - for Delphi XE7 Demos\ThirdParty\FastReport\FMX\Delphi22\*.dpk - for Delphi XE8 Demos\ThirdParty\FastReport\FMX\Delphi23\*.dpk - for Delphi 10 Seattle Demos\ThirdParty\FastReport\FMX\Delphi24\*.dpk - for Delphi 10.1 Berlin Demos\ThirdParty\FastReport\FMX\Delphi25\*.dpk - for Delphi 10.2 Tokyo Demos\ThirdParty\FastReport\FMX\Delphi26\*.dpk - for Delphi 10.3 Rio Demos\ThirdParty\FastReport\FMX\Delphi27\*.dpk - for Delphi 10.4 Sydney Demos\ThirdParty\FastReport\FMX\Delphi28\*.dpk - for Delphi 11 Alexandria To compile applications based on FastReport FMX UniDAC Components, add the following path to the "Library Path": %UniDAC%\Demos\ThirdParty\FastReport\FMX\ where %UniDAC% is the UniDAC installation path on your computer. C++Builder 2007 --------------- If you have only C++Builder 2007, you should perform the following steps 1. Make sure that you have UniDAC and FastReport installed 2. Open the Demos\ThirdParty\FastReport\VCL\Delphi11\MakeCBuilder.bat file in edit mode 3. Make sure that the following paths are assigned correctly: DCCPATH - path to the compiler DCC32.exe PROJECTPATH - path to packages from Fast_Report_Demo\Delphi11 FRLIBDLLPATH - path to FastReport5_Inst_Dir\LibD11 4. Save MakeCBuilder.bat 5. Run MakeCBuilder.bat. After that all generated files will appear in the project path (PROJECTPATH) 6. Copy PROJECTPATH\*.bpl files to a folder that is included in the PATH environment variable 7. Run IDE and add dclfrxUniDAC11.bpl and dclfsUniDAC11.bpl via Component->Install Packages... menu 8. To compile applications with UniDAC for FastReport components, add PROJECTPATH to the "Library Path" and "Include Path" lists