tsmc_rfcmos018_v6.0.zip

Name: tsmc_cm018rf Version: 6.0 Date: 25 November 2004 Description: ADS Front End design kit for the TSMC 0.18um RF CMOS process. Components and models are based on the following TSMC documentation: +-----------------------------+------------+ | TSMC Document Number | Verision | +-----------------------------+------------+ | T-018-MM-SP-001 | 1.3 | +-----------------------------+------------+ Revision History Rev 6.0 --- 01 November 2004 Design Kit confirming to TSMC 0.18 RF CMOS process model version 1.3a. Added LCESD_RF component Added 1.8V/3.3V PMOS components without DNW. Updated the NMOS and PMOS components for the new width and length dimensions in the bins. Modified Inductor calculations Note: The TSMC CMOS 0.18um ADS model file does not support RF CMOS mismatch model, and is thus not supported in the Design Kit Rev 5.0a ---- 16 Sept 2004 Updated the Version 5.0 Design Kit to take care of the following issues: Modified the callback in MIMCAP. To show all the Components in the library browser. To fix a undefined parameter error in TSMC_CM018RF_INDS2_SYM and TSMC_CM018RF_INDS2_SYM_CT components. Fixed the value range of width in TSMC_CM018RF_RES_RF model type "Poly w/o silicide(RF)": The minimum value is set to 1um. Rev 5.0 --- 15 Jul 2004 Design Kit has been updated to conform to the TSMC document listed above. (T-018-MM-SP-001_1_2B, Rev. 1.2b ) Removed LCESD_RF component Added the following components 6 Inductors instead of 2 in the previous version. 3 Resistors instead of 2 in the previous version. 2 Junction varactors, with difference in limiting parameter Width or Number of fingers Updated the MOSCAP to include new netlisted parmeters as per the model file Updated the MIMCAP for 2 different types- With and Without Shield, and added paramter Wt according to the model file Rev 4.0 --- 10 Jan 2003 Added in LCESD_RF component Changed parameter rad_V to rad on spiral_rad component. Modified callback functions to set values in range when out of range values are specified. Updated resistor callbacks to reflect accurate sheet resistances and minimum widths based on the latest model files Updated process component so it would undefined CPP variables that were defined specifically for use in the design kit's model files. Updated installation instructions to reflect ADS 2002 and beyond requirement for the kit.