DHT11-2.1.0.zip

# DHT11 Arduino Library   [](LICENSE) [](https://github.com/dhrubasaha08/DHT11/graphs/contributors)  ## Table of Contents - [DHT11 Arduino Library](#dht11-arduino-library) - [Table of Contents](#table-of-contents) - [Introduction](#introduction) - [Updates](#updates) - [v2.1.0 Hotfix `Latest`](#v210-hotfix-latest) - [v2.0.0 Update](#v200-update) - [How It Works](#how-it-works) - [Internal Protocol Handling](#internal-protocol-handling) - [Features](#features) - [Installation](#installation) - [Arduino IDE Library Manager](#arduino-ide-library-manager) - [Installing Manually from GitHub](#installing-manually-from-github) - [Usage](#usage) - [Basic Usage](#basic-usage) - [New Methods](#new-methods) - [Wiring Details](#wiring-details) - [Examples](#examples) - [Error Handling](#error-handling) - [Troubleshooting](#troubleshooting) - [FAQ](#faq) - [Compatibility](#compatibility) - [Contribute by Testing](#contribute-by-testing) - [Contributing](#contributing) - [Code of Conduct](#code-of-conduct) - [License](#license) - [External References](#external-references) ## Introduction This Arduino library is designed for the DHT11 temperature and humidity sensor. It simplifies the process of reading temperature and humidity data, making it easy to integrate the DHT11 sensor into your Arduino projects. **Author:** [Dhruba Saha](https://github.com/dhrubasaha08) **Version:** 2.1.0 **License:** [MIT](/LICENSE) ## Updates ### v2.1.0 Hotfix `Latest` - Introduced the `readTemperatureHumidity(int &temperature, int &humidity)` method, allowing for efficient simultaneous reading of temperature and humidity, streamlining the data acquisition process. - Refactored the internal data reading process, reducing code repetition and improving maintainability. - Enhanced error handling: Now, specific error codes are returned from the `readTemperatureHumidity` method, making it consistent with the `readTemperature` and `readHumidity` methods. - Documentation updated to reflect the new changes and provide clear guidance on using the new library version. *Note: The updates in version 2.1.0 are backward compatible with the previous versions(v2.x.x), ensuring a smooth transition for existing projects.* ### v2.0.0 Update - Changed the return type of `readTemperature()` and `readHumidity()` methods from `float` to `int`. This aligns with the DHT11 sensor's 1-degree resolution. - Enhanced code documentation for easier maintenance and better readability. - Added the `getErrorString` method to return human-readable error messages based on error codes. - Major code refactoring for better maintainability and robustness. - Introduced the [`CONTRIBUTING.md`](CONTRIBUTING.md) file to guide contributors on how to effectively contribute to the library. - Added a [`CODE_OF_CONDUCT.md`](CODE_OF_CONDUCT.md) to establish community guidelines and expectations for behavior. - Introduced the [`ReadPlot`](/examples/ReadPlot/ReadPlot.ino) example which uses the Arduino Serial Plotter to display temperature and humidity data. This example provides a visual representation of the sensor's readings, making it easier to monitor environmental conditions in real-time. - Added ESP32/ESP8266 compatibility. ## How It Works The DHT11 sensor uses a custom single-wire protocol for communication. The basic process for reading data involves: 1. Sending a start signal to the DHT11 sensor. 2. Reading a series of pulses from the sensor representing data bits. 3. Interpreting the received bits to extract temperature and humidity values. 4. Validating the data using a checksum. The library handles these steps internally, providing the user with a simple interface for reading temperature and humidity. ### Internal Protocol Handling The library initiates the data request to the DHT11 sensor and then reads a 40-bit data stream in response. The data stream is parsed to obtain accurate temperature and humidity readings. The process of reading data from the DHT11 involves multiple steps:  **Source & Credit :** [Mouser DHT11 Datasheet](https://www.mouser.com/datasheet/2/758/DHT11-Technical-Data-Sheet-Translated-Version-1143054.pdf) 1. **Initialization and Request**: - The MCU (like an Arduino) sends a start signal by pulling the data line low for at least 18ms. - The MCU then pulls the line high for 20-40us to indicate that it's ready to receive a response. 2. **DHT11 Response**: - Upon detecting the start signal from the MCU, the DHT11 sends a response signal. - This response consists of a 80us low voltage level followed by an 80us high voltage level. 3. **Data Transmission**: - The DHT11 transmits its data in a series of pulses. Each bit of data is represented by a specific combination of high and low voltage durations. - A '0' is represented by 50us of low voltage followed by 26-28us of high voltage. - A '1' is represented by 50us of low voltage followed by 70us of high voltage. - The DHT11 sends 40 bits of data in total: 16 bits for humidity, 16 bits for temperature, and 8 bits for checksum. - The checksum is the last 8 bits of the sum of the first 32 bits. It's used to verify data integrity. 4. **Data Interpretation**: - After reading the 40 bits, the MCU processes the data to extract temperature and humidity values. - The bits are grouped to form the integral and decimal parts of the temperature and humidity readings, though the DHT11 provides only integer values. 5. **Completion**: - After data transmission, the DHT11 pulls the data line low for 50us, marking the end of the communication. The MCU then pulls the line high, putting the DHT11 in a low-power standby mode. This library abstracts these complexities, allowing users to easily read temperature and humidity values with simple function calls. Behind the scenes, it manages the signaling, data reading, and interpretation based on the DHT11's protocol. ## Features - **Easy to Use**: Easy to use interface for reading temperature and humidity from the DHT11 sensor. - **No External Dependencies**: The library is standalone and doesn't require any external libraries. - **Example Sketches**: The library package includes example Arduino sketches to get you started quickly. - **Error Handling**: The library package includes Error handling mechanisms to ensure robustness. ## Installation ### Arduino IDE Library Manager 1. Open the Arduino IDE. 2. Go to `Sketch` > `Include Library` > `Manage Libraries...`. 3. In the Library Manager, enter "DHT11" into the search box. 4. Find the DHT11 library in the list and install it. ### Installing Manually from GitHub 1. Download the latest release of the library from this GitHub repository as a ZIP file. 2. Open the Arduino IDE. 3. Go to `Sketch` > `Include Library` > `Add .ZIP Library...`. 4. Navigate to the downloaded ZIP file and select it to install. ## Usage ### Basic Usage - Include the `DHT11.h` header file. - Create an instance of the DHT11 class, specifying the digital pin connected to the sensor's data pin. - Use `readTemperature()` and `readHumidity()` methods to read the data. - `getErrorString(int errorCode)`: Returns a human-readable error message based on the provided error code. ### New Methods - `readTemperatureHumidity(int &temperature, int &humidity)`: This new method allows for simultaneous reading of temperature and humidity, reducing the complexity and time required for separate readings. I