Software License and Support Agreement
Applies to:
RAD Studio 11
Delphi 11
C++Builder 11
1. SCOPE. This Software License and Support Agreement ("Agreement") is a legal agreement between you (either an individual or an entity ("you" or "Licensee")) and Embarcadero Technologies, Inc., a Delaware corporation with offices at 10801 N Mopac Expressway, Building 1, Suite 100, Austin, Texas 78759, including its affiliates ("Licensor"). By downloading or unsealing Licensor's software and/or documentation ("Products"), Licensee is agreeing to be bound by the terms of this Agreement. In the event of a conflict between the terms of this Agreement and any ordering document, the terms of this Agreement will govern and control. Delivery if made by any means other than electronic delivery, shall be made FCA (Incoterms 2010) Licensor's shipping point. If Licensee is evaluating Licensor software, only the provisions of Section 22 below will govern such evaluation.
2. LICENSE.
2.1 LICENSE GRANT. Licensor grants to Licensee a non-exclusive, nontransferable, perpetual (except to the extent Licensee has purchased a Subscription License (as defined below)) right and license (the "License") to install this Product within the country (or in the case of a country within the European Union within the European Union) specified by Licensee's ship to address provided by Licensee in the ordering documentation for the Product at the time of purchase ("Licensed Country") and solely for the development of software programs and/or management of its internal systems and data in the following manner:
(a) If Licensee has purchased a Network Named User or Named User License, Licensee may install the Product on one or more computers and designate one person in Licensee's organization ("Named User") the right to use the Product within the Licensed Country, provided that only the Named User uses the Product. For clarity, this section does not apply to the Community Edition, which is a free edition, limited commercial use edition.
(b) If Licensee has purchased a Concurrent Users License, Licensee may install the Product on a network within the Licensed Country to be used concurrently on different computers by up to the authorized number of users for which Licensee has purchased a license provided that the Product is accessed and used only in the Territory. "Territory" means the geographical area in which the Product may be accessed and used. The use in the Territory shall be subject to the export restrictions set forth below. Territory may be any one, and only one, of the following three geographic areas: Americas Territory, EMEA Territory or AsiaPac Territory each as defined below.
The geographic Territories are:
'Americas Territory' including and limited to those geographical areas found within the boundaries of North and South America (but excluding Cuba).
'Europe, Middle East and Africa Territory' or 'EMEA Territory' including and limited to those geographical areas found within the boundaries of Europe, Middle East and Africa, including countries in the former Soviet Union (but excluding Syria, Iran and Sudan);
'Asia Pacific Territory' or 'AsiaPac Territory' including and limited to those geographical areas found within the boundaries of Asia and Australia/Pacific (but excluding North Korea).
Except where prohibited by applicable law, transfer of the Product into a country (or in the case of the European Union, outside the EU) not identified on the ordering documentation at the time of purchase is prohibited and will void the license. Temporary usage of a Product outside the Licensed Country or Territory while a user is traveling is permitted.
Licensee usage of the Product may be restricted to DBMS platforms please look to Licensee's ordering document(s) for the specific platforms licensed. Certain editions of the Product may include AppWave and/or app features. Additional restrictions applicable to those features may be found in supplemental terms accompanying them.
2.2. GENERAL TERMS THAT APPLY TO COMPILED PROGRAMS AND REDISTRIBUTABLES.
2.2.1 Redistributables. The Product may include certain files, libraries and/or source code specifically designated as "redistributables" by Licensor in the accompanying printed or on-line documentation ("Redistributables") that are necessary to use works ("Works") created using the Product. From time to time, Licensor may designate other files as Redistributables. Licensee should refer to the documentation, including any "readme" or "deploy" files provided with the Product, for additional information regarding Redistributables. Unless otherwise indicated in a "readme" or "deploy" file, Redistributables may only be distributed as part of Licensee's Works, in executable, non-source form. Subject to the terms and conditions of this Agreement, Licensee may freely redistribute source code or compiled code that is entirely Licensee's own and does not contain any Redistributables.
2.2.2 Licensing of Redistributables. Subject to the terms and conditions of this Agreement including the restrictions of Section 2.2.3, Licensor grants Licensee the personal, nonexclusive, nontransferable, and limited license to: (a) make exact copies of the Redistributables and distribute those copies solely as components of Licensee's Works and solely as required for permitting end users of the Works ("End Users") to install and execute the Works; (b) install and execute Redistributables, without modification, on computers that Licensee owns or possesses solely for Licensee's own internal use; and (c) sublicense to Licensee's End Users the personal, nonexclusive, nontransferable right to install and execute Redistributables, without modification, solely as components of Works and solely for such End Users' own internal use, subject to End Users' compliance with the restrictions in Section 5 as to Redistributables. Notwithstanding the foregoing, Licensee may modify Redistributables that are provided to Licensee in source form, subject to all the terms of this Section 2.2 and provided that the modified Redistributables are distributed (i) only as part of Licensee's larger Work (ii) the Redistributable file is renamed and (iii) only executable, non source Redistributables may be distributed. The rights granted to Licensee under this Section 2.2.2 may not be exercised by others, including co-developers, regardless of how Licensee might compile, link, or package Licensee's Works. These rights apply only to Redistributables and to no other file, library, source code or other component or derivative work of the Product. They may be exercised only with respect to Works created by Licensee using a duly licensed, properly registered copy of the Product.
2.2.3 Certain Restrictions. Regardless of any modifications that Licensee makes and regardless of how Licensee might compile, link, or package Licensee's Works: (a) except as provided in Section 2.2.6, Licensee may not permit Licensee's End Users to modify or further distribute Redistributables or use Redistributables in any program that they create; (b) Licensee may not use Licensor's or any of its suppliers' names, logos, or trademarks to market Licensee's Works, except to state descriptively that Licensee's Work was written using the Product; (c) all copies of the Works Licensee create must bear a valid copyright notice, either Licensee's own or the Licensor copyright notice that appears on the Product, and Licensee may not remove or alter any Licensor copyright, trademark or other proprietary rights notice contained in any portion of the Redistributables; and (d) Licensee may only distribute Redistributables with Works that add primary and substantial functionality to the Redistributables and are not merely a set or subset of any of the Redistributables, and that are created in accordance with the terms of this Agreement. Licensee shall not modify or distribute the Redistributables so
海纳老吴
- 粉丝: 8413
- 资源: 117
最新资源
- 永磁同步电机双矢量占空比模型预测转矩控制(MPTC)策略解析及全局最优占空比选择:仿真效果卓越,文档详解,永磁同步电机双矢量占空比模型预测转矩控制mptc,考虑全局最优占空比选择,使得全局占空比基本都
- 永磁同步电机改进型三矢量模型预测电流控制:结合q轴电流斜率与切换控制策略,混合输出三矢量和单矢量解析文档赠送,永磁同步电机改进型三矢量模型预测电流控制,参考张晓光老师的lunwenModel Pred
- SCL与CFC编写方法:实现五个电机的逆启顺停顺序控制程序,2种方法SCL编写和CFC编写5个电机逆启顺停的顺控程序 方法一:使用西门子的电机功能块和联锁块编写5个电机逆启顺停的顺控程序 方法二、使用
- 改进非洲秃鹫优化算法性能展示与四种算法对比,改进非洲秃鹫优化算法(IAVOA,2021年,名字自己随便取的),引入了几种改进策略,效果还不错 与DBO,AVOA,WOA,NGO四种算法,在
- 基于Comsol的粗糙单裂隙渗流与传热耦合模型研究:模型建立与边界条件细探,Comsol粗糙单裂隙渗流传热耦合数值模型, 细模型边界条件以及模型建立 ,核心关键词:Comsol; 粗糙单裂隙; 渗流
- 基于裂隙岩体特征的 热-流-固耦合效应数值建模技术探讨,裂隙岩体热-流-固耦合数值建模 ,核心关键词:裂隙岩体;热-流-固耦合;数值建模;建模方法;耦合效应;数值模拟;地质工程;地球科学;岩土工程;工
- 基于Simulink的BMS动力电池管理系统的仿真与控制策略模型研究,BMS仿真电池平衡控制策略仿真similink 动力电池管理系统仿真 BMS + Battery Simulink 控制策略模型
- Simulink飞轮储能PMSM永磁同步机与同步机一次调频:系统频率特性研究与参考文献解析,simulink飞轮储能PMSM永磁同步机与同步机一次调频,系统频率特性如下,有参考文献 ,核心关键词:S
- 小土堆学习笔记相关资源
- 基于FPGA的DDS波形发生器技术:实现多波形数字频率合成与调频调幅调相切换功能,基于FPGA的DDS多波形数字频率合成技术,波形发生器,采用DDS原理,以FPGA芯片作为核心,采用verilog H
- 永磁同步电机直接转矩控制DTC模型(含传统与滑膜控制对比研究)利用Simulink仿真分析,永磁同步电机+SIMULINK+直接转矩控制 DTC控制模型x2(传统+滑膜) A1 暂无文档 ,核心关键词
- Matlab下的储能蓄电池PQ控制策略研究与实践,matlab储能蓄电池pq控制 ,核心关键词:Matlab; 储能蓄电池; PQ控制; 能源管理; 电池优化控制; 电力系统 ,Matlab储能蓄电池
- 基于模型预测控制的四轮独立驱动与转向路径跟踪:车辆稳定性控制的高级算法,四轮独立驱动 转向路径跟踪及车辆稳定性控制 模型预测控制MPC 上层4WS+DYC,下层阿克曼转向分配和最小轮胎负荷率驱动力矩分
- Simulink中四机两区域系统一次调频优化:风机与光伏同步机的联合调频策略及多台双馈风电场联合调频研究,simulink简化四机两区域系统一次调频,风机同步机光伏调频,新能源风电渗透率高,可调,风电
- 基于WinCC 8.0与STEP V5.7 SP1的PLC编程虚拟机,Win10 22H2最新系统,支持PLCSIM与多种组件安装 ,西门子WinCC 8.0 机 STEP V5.7 SP1Chin
- 基于蚁群算法与A*算法的多目标点路径规划:送餐机器人室内旅行商问题的解决方案,多目标点路径规划-蚁群+A*算法 室内旅行商问题-送餐移动机器人(从厨房出发到达多个目标点,最后返回厨房) 1,A*算
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈