/**
******************************************************************************
* @file stm32f10x_tim.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the TIM firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_tim.h"
#include "stm32f10x_rcc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup TIM
* @brief TIM driver modules
* @{
*/
/** @defgroup TIM_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Defines
* @{
*/
/* ---------------------- TIM registers bit mask ------------------------ */
#define SMCR_ETR_Mask ((uint16_t)0x00FF)
#define CCMR_Offset ((uint16_t)0x0018)
#define CCER_CCE_Set ((uint16_t)0x0001)
#define CCER_CCNE_Set ((uint16_t)0x0004)
/**
* @}
*/
/** @defgroup TIM_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_FunctionPrototypes
* @{
*/
static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
/**
* @}
*/
/** @defgroup TIM_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Functions
* @{
*/
/**
* @brief Deinitializes the TIMx peripheral registers to their default reset values.
* @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
* @retval None
*/
void TIM_DeInit(TIM_TypeDef* TIMx)
{
/* Check the parameters */
assert_param(IS_TIM_ALL_PERIPH(TIMx));
if (TIMx == TIM1)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE);
}
else if (TIMx == TIM2)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE);
}
else if (TIMx == TIM3)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE);
}
else if (TIMx == TIM4)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE);
}
else if (TIMx == TIM5)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE);
}
else if (TIMx == TIM6)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE);
}
else if (TIMx == TIM7)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE);
}
else if (TIMx == TIM8)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE);
}
else if (TIMx == TIM9)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE);
}
else if (TIMx == TIM10)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE);
}
else if (TIMx == TIM11)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE);
}
else if (TIMx == TIM12)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE);
}
else if (TIMx == TIM13)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE);
}
else if (TIMx == TIM14)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE);
}
else if (TIMx == TIM15)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE);
}
else if (TIMx == TIM16)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE);
}
else
{
if (TIMx == TIM17)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE);
}
}
}
/**
* @brief Initializes the TIMx Time Base Unit peripheral according to
* the specified parameters in the TIM_TimeBaseInitStruct.
* @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
* @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef
* structure that contains the configuration information for the
* specified TIM peripheral.
* @retval None
*/
void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
{
uint16_t tmpcr1 = 0;
/* Check the parameters */
assert_param(IS_TIM_ALL_PERIPH(TIMx));
assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode));
assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision));
tmpcr1 = TIMx->CR1;
if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)||
(TIMx == TIM4) || (TIMx == TIM5))
{
/* Select the Counter Mode */
tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS)));
tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode;
}
if((TIMx != TIM6) && (TIMx != TIM7))
{
/* Set the clock division */
tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD));
tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision;
}
TIMx->CR1 = tmpcr1;
/* Set the Autoreload value */
TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ;
/* Set the Prescaler value */
TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler;
if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17))
{
/* Set the Repetition Counter value */
TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter;
}
/* Generate an update event to reload the Prescaler and the Repetition counter
values immediately */
TIMx->EGR = TIM_PSCReloadMode_Immediate;
}
/**
* @brief Initializes the TIMx Channel1 according to the specified
* parameters in the TIM_OCInitStruct.
* @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
* @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
* that contains the configuration information for the specified TIM peripheral.
* @retval None
*/
void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
{
uint16_t tmpccmrx = 0, tmpccer = 0, tmpc
没有合适的资源?快使用搜索试试~ 我知道了~
基于stm32的智能门禁系统,包含人脸识别,RFID,蓝牙app,密码锁.zip
共254个文件
h:49个
c:46个
d:44个
1.该资源内容由用户上传,如若侵权请联系客服进行举报
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
版权申诉
5星 · 超过95%的资源 2 下载量 11 浏览量
2024-03-05
17:28:18
上传
评论 4
收藏 8.84MB ZIP 举报
温馨提示
基于stm32的智能门禁系统,包含人脸识别,RFID,蓝牙app,密码锁.zip 基于stm32的智能门禁系统,包含人脸识别,RFID,蓝牙app,密码锁.zip 基于stm32的智能门禁系统,包含人脸识别,RFID,蓝牙app,密码锁.zip 基于stm32的智能门禁系统,包含人脸识别,RFID,蓝牙app,密码锁.zip 基于stm32的智能门禁系统,包含人脸识别,RFID,蓝牙app,密码锁.zip 基于stm32的智能门禁系统,包含人脸识别,RFID,蓝牙app,密码锁.zip 基于stm32的智能门禁系统,包含人脸识别,RFID,蓝牙app,密码锁.zip 基于stm32的智能门禁系统,包含人脸识别,RFID,蓝牙app,密码锁.zip 基于stm32的智能门禁系统,包含人脸识别,RFID,蓝牙app,密码锁.zip 基于stm32的智能门禁系统,包含人脸识别,RFID,蓝牙app,密码锁.zip 基于stm32的智能门禁系统,包含人脸识别,RFID,蓝牙app,密码锁.zip 基于stm32的智能门禁系统,包含人脸识别,RFID,蓝牙app,密码锁.zip 基于stm32的
资源推荐
资源详情
资源评论
收起资源包目录
基于stm32的智能门禁系统,包含人脸识别,RFID,蓝牙app,密码锁.zip (254个子文件)
Project.uvguix.86151 88KB
Project.uvguix.Admin 86KB
Project.axf 630KB
keilkill.bat 372B
stm32f10x_tim.c 104KB
stm32f10x_flash.c 59KB
stm32f10x_rcc.c 49KB
stm32f10x_adc.c 45KB
stm32f10x_i2c.c 43KB
stm32f10x_can.c 43KB
rc522.c 42KB
stm32f10x_usart.c 36KB
system_stm32f10x.c 35KB
stm32f10x_fsmc.c 34KB
stm32f10x_spi.c 29KB
stm32f10x_dma.c 28KB
stm32f10x_sdio.c 27KB
stm32f10x_gpio.c 22KB
oled.c 21KB
as608.c 19KB
stm32f10x_dac.c 18KB
core_cm3.c 16KB
stm32f10x_cec.c 11KB
stm32f10x_pwr.c 8KB
stm32f10x_rtc.c 8KB
stm32f10x_bkp.c 8KB
oled_iic.c 8KB
OLED.c 7KB
misc.c 7KB
stm32f10x_exti.c 7KB
key1.c 6KB
stm32f10x_wwdg.c 5KB
main.c 5KB
stm32f10x_dbgmcu.c 5KB
stm32f10x_iwdg.c 5KB
stm32f10x_it.c 4KB
usart3.c 4KB
timer.c 3KB
Serial.c 3KB
keyCode.c 3KB
spi.c 3KB
stm32f10x_crc.c 3KB
flash.c 3KB
PWM.c 2KB
Key.c 1KB
LED.c 1012B
sys.c 839B
Delay.c 797B
Beep.c 706B
SERVO.c 191B
as608.crf 363KB
main.crf 361KB
rc522.crf 361KB
stm32f10x_tim.crf 360KB
oled_iic.crf 352KB
keycode.crf 350KB
usart3.crf 349KB
key1.crf 349KB
stm32f10x_can.crf 347KB
stm32f10x_adc.crf 346KB
stm32f10x_rcc.crf 346KB
stm32f10x_flash.crf 346KB
serial.crf 345KB
stm32f10x_i2c.crf 345KB
stm32f10x_usart.crf 344KB
stm32f10x_fsmc.crf 344KB
stm32f10x_sdio.crf 343KB
stm32f10x_spi.crf 343KB
stm32f10x_gpio.crf 342KB
stm32f10x_dma.crf 342KB
flash.crf 341KB
timer.crf 341KB
stm32f10x_dac.crf 340KB
stm32f10x_cec.crf 340KB
system_stm32f10x.crf 340KB
stm32f10x_bkp.crf 340KB
stm32f10x_pwr.crf 340KB
stm32f10x_rtc.crf 340KB
stm32f10x_exti.crf 339KB
sys.crf 339KB
stm32f10x_wwdg.crf 339KB
misc.crf 339KB
pwm.crf 339KB
key.crf 339KB
led.crf 339KB
stm32f10x_iwdg.crf 338KB
stm32f10x_crc.crf 338KB
beep.crf 338KB
stm32f10x_it.crf 338KB
stm32f10x_dbgmcu.crf 338KB
delay.crf 338KB
servo.crf 338KB
core_cm3.crf 4KB
main.d 2KB
usart3.d 2KB
as608.d 2KB
keycode.d 2KB
stm32f10x_dbgmcu.d 2KB
oled_iic.d 2KB
stm32f10x_flash.d 2KB
共 254 条
- 1
- 2
- 3
资源评论
- ydjnxn06012024-04-29果断支持这个资源,资源解决了当前遇到的问题,给了新的灵感,感谢分享~
- 2301_822036312024-03-19感谢资源主分享的资源解决了我当下的问题,非常有用的资源。
白如意i
- 粉丝: 6739
- 资源: 3230
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- 基于Java和Javascript的音乐悬浮歌词设计源码 - musicLrc
- ripgrep tools
- kubesphere离线安装v3.3的centos7iso资源
- xx 文库下载神器,目前亲测试pdf 有效
- kubesphere离线安装v3.3的v3.0.7的kk资源
- kubesphere离线安装v3.3的ubuntu2020iso资源
- 一个简单的Python脚本,它包含了将点分十进制IP地址转换为32位整数(通常称为IPv4地址的整数表示)和进行简单的IP地址校
- scratch2源码星球大战
- Java springboot 创建springboot项目基础框架
- 成绩管理系统后台20240529135001
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功