ICSP
P1030
D
/YPS-1133
DN
Series
Monochrome Laser MFP
「 「 「 「「
Preface
Legal Notice
Welcome to the ICSP YPS series products!
We heartily appreciate your using of ICSP YPS series products!
To protect your vital interests, please carefully read the following statements.
Trademark
Microsoft
®
, Windows
®
, Windows Server
®
and Windows Vista
®
are trademarks registered by
Microsoft Corporation in the United States or other countries/regions.
Wi-Fi Direct,Wi-Fi Protected Setup(WPS),WPA,WPA2,and Wi-Fi Protected Access are marks of the
Wi-Fi Alliance.
The ownership to the names of the software in this User Guide belongs to their respective
companies in accordance with corresponding license agreement, and they are referred for
instructions only.
All other product and brand names herein may be the registered trademarks, trademarks
or service marks of their respective owners, and they are referred for instructions only.
Copyright
The Copyright of this User Guide is owned by Shanghai Kaidun Industrial Co., Ltd.
It is prohibited to copy, translate, modify and transmit this User Guide by any means or forms
without the prior written consent of Shanghai Kaidun Industrial Co., Ltd.
Version:V1.1
Disclaimer
For a better user experience, Shanghai Kaidun Industrial Co., Ltd. reserves the right to make
changes to the User Guide. The information contained herein is subject to change without notice.
Users are responsible for any damages arising from failing to follow this User Guide.Meanwhile,
except the express warranty made in the product maintenance manual or service commitment,
Shanghai Kaidun Industrial Co., Ltd. does not make any express or implied warranty or guarantee to
this User Guide (including composing or words).
Using this product to copy, print, scan certain documents or images or make other forms of
operations may be prohibited by the local laws. If you are uncertain about the legality of using this
product for certain documents or images, you should consult your legal advisor in advance.
The product can only be used safely in the non-tropical areas at an altitude no higher than
2000 meters.
I
Safety Precautions
Laser Safety
The laser radiation is harmful to the human body. Since laser components are completely
The following label is attached to the laser components inside the printer:
Safety Warning
Please note the following safety warnings before using the printer:
Warning
Plugging and unplugging the power cord plug with a wet
hand can result in an electric shock.
The fuser unit is hot when and after printing. Touching the
fuser unit (the shaded area as shown) may cause burns!
The fuser unit is attached with a high temperature warning
label. Please do not remove or damage this label.
sealed in the printer, laser radiation will not leak. To avoid laser radiation, please do not
randomly disassemble the printer!
The printer follows the provisions of Class 1 laser products under CFR standard. The
printer has a Class III b laser diode, which has no laser radiation leakage among laser
components.
The laser components shall complies with the requirements of: U.S. Code of Federal
Regulations, 21 CFR 1040, IEC 60825-1.
There is high-voltage electrode inside the printer.
Before cleaning the printer,make sure the power is turned off!
II
Disconnect the power supply
The product should be placed close to or easily accessible to power sockets, so as to
allow easy disconnection of power supply!
Precautions before Using the Printer:
1. Read and understand all instructions;
2. Familiarize yourself with the basic principles associated with operating electrical appliances;
3. Comply with all warnings and instructions marked on the equipment or specified in the
manual supplied with the equipment;
4. If the operating instructions conflict with the safety information, please refer back to the safety
information, as you may have misunderstood the operating instructions. If you cannot resolve the
conflicts, please call the Customer Service Hotline or contact a service representative for help;
5.
Before cleaning the equipment, remove the power cord from the AC power supply outlet.
Do not use liquid or aerosol cleaners;
6. Please make sure that the equipment is put on a stable desktop surface to avoid serious
damage caused by the falling of the equipment;
7. Do not put the equipment near a radiator, an air conditioner, or a ventilation pipe;
8. Do not put any articles on the power cord. Do not put the equipment at the place where its
power cord could be stepped on by people;
9. Outlets and extension cords must not be overloaded. This may reduce performance and could
result in fire or electric shock;
10.Do not allow pets to chew on the AC power cord or the computer interface cable;
11.Do not allow sharp objects piercing equipment slot, so as to avoid contact with the
high-voltage device, which otherwise may result in fire or electric shock. Take care not to
spill liquids onto the equipment;
12.Do not disassemble the equipment so as to avoid the risk of electric shock. Necessary repairs
may only be carried out by professional maintenance personnel. Opening or removing the cover
could result in an electric shock or other potential hazards. Incorrect disassembly and assembly
could also result in an electric shock during future use;
13.If any one of the following occurs, disconnect the equipment from the computer and pull
out the power cord from the AC wall socket and contact a qualified member of the service
personnel for maintenance:
• Liquid has been spilled into the equipment.
• The equipment has been exposed to rain or water.
• The equipment falls, or the cover is damaged.
• Significant changes in the equipment’s performance.
14.Only adjust the control mentioned in the instructions. Incorrect adjustment of other controls
may result in damage and mean that professional maintenance personnel need to spend
more time fixing it;
15.Do not use the equipment in a thunderstorm so as to avoid the risk of an electric shock.
If possible, pull out the AC power cord during a thunderstorm;
Precautions
III
19.In standby status, the product will automatically enter into the power saving (sleep) mode if it
does not receive any job order for a while (such as 1 minute); and it can realize zero power
consumption only if it has not been connected with any external input power supply;
20.As the Class I equipment, the product must be connected to the power supply outlet with
protective grounding line when using;
21.This product should be placed according to the shipping marks on the product package
box during delivery;
22.This product is a kind of low-voltage equipment. When using this product below the specified
voltage range,please refer to the product precautions or call ICSP Aftersales Service Centre, if
the toner comes off the printed contents, or the equipment starts slowly;
23.This product is sold as a complete machine. The consumers can go to ICSP Aftersales
Service Centre to purchase parts they need. If the product sold is inconsistent with the
package list, please go to the specified Aftersales Service Centre to solve the problem;
24.
Install this product in a place with the temperature between 10 ℃ and 35℃ and the relative
humidity between 20% and 80%;
16.If you continuously print multiple pages, the surface of the tray will become very hot.
Take care not to touch this surface, and keep children away from this surface;
17.The signal wire of the device connected with the printer can not be connected to the outdoors;
18.Please ensure timely ventilation in case of a prolonged use or printing huge amounts
of documents in a poorly ventilated room;
IV
25.Changes or modification not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
26. Please keep this User Guide properly.
