Etherent: company; 5. Wireless LAN: mobile; 6. Cellular mobile access (for example,
WAP): mobile
14. A tier-1 ISP connects to all other tier-1 ISPs; a tier-2 ISP connects to only a few of
the tier-1 ISPs. Also, a tier-2 ISP is a customer of one or more tier-1
15. A POP is a group of one or more routers in an ISPs network at which routers in other
ISPs can connect. NAPs are localized networks at which many ISPs (tier-1, tier-2 and
lower-tier ISPs) can interconnect.
16. HFC bandwidth is shared among the users. On the downstream channel, all packets
emanate from a single source, namely, the head end. Thus, there are no collisions in
the downstream channel.
17. Ethernet LANs have transmission rates of 10 Mbps, 100 Mbps, 1 Gbps and 10 Gbps.
For an X Mbps Ethernet (where X = 10, 100, 1,000 or 10,000), a user can
continuously transmit at the rate X Mbps if that user is the only person sending data.
If there are more than one active user, then each user cannot continuously transmit at
X Mbps.
18. Ethernet most commonly runs over twisted-pair copper wire and “thin” coaxial cable.
It also can run over fibers optic links and thick coaxial cable.
19. Dial up modems: up to 56 Kbps, bandwidth is dedicated; ISDN: up to 128 kbps,
bandwidth is dedicated; ADSL: downstream channel is .5-8 Mbps, upstream channel
is up to 1 Mbps, bandwidth is dedicated; HFC, downstream channel is 10-30 Mbps
and upstream channel is usually less than a few Mbps, bandwidth is shared.
20. The delay components are processing delays, transmission delays, propagation
delays, and queuing delays. All of these delays are fixed, except for the queuing
delays, which are variable.
21. Five generic tasks are error control, flow control, segmentation and reassembly,
multiplexing, and connection setup. Yes, these tasks can be duplicated at different
layers. For example, error control is often provided at more than one layer.
22. The five layers in the Internet protocol stack are – from top to bottom – the
application layer, the transport layer, the network layer, the link layer, and the
physical layer. The principal responsibilities are outlined in Section 1.7.2.
23. Routers process layers 1 through 3. (This is a little bit of a white lie, as modern
routers sometimes act as firewalls or caching components, and process layer four as
well.)
Chapter 1 Problems
评论2
最新资源