基于52单片机、ADC0832、LCD1602、两个74HC393和一个74HC08的频率测量计 不能用，请私我

//******************************* //**********设计者：陈仲奇******** //**********欢迎交流指导************** //******************************** #include <REGX52.H> #include<stdio.h> #include<math.h> #include"adc0832.h" #include "LCD1602.h" #define uchar unsigned char #define uint unsigned int sbit clr=P3^0; sbit gate=P3^1; sbit turn=P3^7; sbit U_turn=P3^2; uint num=0; uint peak_value=0; float Upp=0; uchar wave=1,pulse=1; uint j=0,counter=0; unsigned long int Hight_byte=0,Low_byte=0; //ms延时------------------------------ void delay_ms(uint z) { uint x; uchar y; for(x=0;x<z;x++) for(y=0;y<110;y++) ; } //1s延时------------------------------ void delay_1s(void) { uchar h,i,j,k; for(h=5;h>0;h--) for(i=4;i>0;i--) for(j=116;j>0;j--) for(k=214;k>0;k--); } //定时计数 初始化---------------------------------- void CT_init() { TMOD = 0x25; // T0计数，T1定时 TH0 = 0x00; TL0 = 0x00; TH1 = 0x06; TL1 = 0x06; clr=1; clr=0; gate=0; gate=1; ET0 = 1; ET1 = 1; EA = 1; TR0 = 1; TR1 = 1; } //主函数-------------------------------------- void main() { unsigned long fre=0; bit mode=0; uchar buff[10]; uint temp=0; LCD_Initial(); CT_init(); GotoXY(0,0); Print("Welcome to use ") ; GotoXY(0,1); Print("Please Wating..."); delay_1s(); LCD_Write(LCD_COMMAND,LCD_CLEAR_SCREEN); while(1){ if(turn==0){ delay_ms(5); if(turn==0) { while(turn==0); mode=~mode;LCD_Write(LCD_COMMAND,LCD_CLEAR_SCREEN); } } temp=vollage(0); if(temp>peak_value) peak_value=temp; if(temp>peak_value>>3&&temp<peak_value>>1) pulse=0; if(mode==0){ fre=(Hight_byte*256)+Low_byte; if(fre==0){ GotoXY(0,0);Print("F= 0000000000 Hz"); GotoXY(0,1);Print("F= 0000000000 Hz"); } else{ GotoXY(0,0);Print("F= Hz");sprintf(buff,"%ld",fre);GotoXY(2,0);Print(buff); GotoXY(0,1);Print("P= ms");sprintf(buff,"%0.6f",1000.0/fre);GotoXY(2,1);Print(buff); } } else{ sprintf(buff,"%bd",wave); GotoXY(0,0); Print(buff); sprintf(buff,"Upp=%0.3fV",Upp); GotoXY(0,1); Print(buff); } } } /*--------------------------------------------------------------*/ //计数器T0中断服务程序 void T0_counter(void) interrupt 1 using 1 { } /*--------------------------------------------------------------*/ //定时器T1中断服务程序 void T1_timer(void) interrupt 3 using 3 { if(num==3999){ gate=0; TR0=0;TR1=0; Hight_byte=TH0*256+TL0; Low_byte=P1; Upp=peak_value/100.0; peak_value=0; wave=pulse; pulse=1; clr=1; clr=0; TH0 = 0x00; TL0 = 0x00; TH1 = 0x06; TL1 = 0x06; num=0; gate=1; TR0=1;TR1=1; } else num++; }