一.基本信息配置
system-view //进入系统视图
[H3C]sysname RT3 //为设备命名
[RT3]super password simple H3C //设置超级密码
[RT3]local-user admin //添加用户
[RT3-luser-admin]password simple admin //为用户设定密码
[RT3-luser-admin]service-type telnet //指定用户的类型
[RT3-luser-admin]quit //返回上一级
[RT3]user-interface vty 0 4 //进入 vty
[RT3-ui-vty0-4]set authentication password simple telnet
//设置远程登陆认证,密码为 telnet
[RT3-ui-vty0-4]idle-timeout 5 0 //配置超时退出时间
其它略
二、链路配置及调测
interface Serial0/2/0
ip address 10.1.13.2 255.255.255.252
undo shutdown
interface LoopBack0
ip address 3.3.3.3 255.255.255.255
undo shutdown
interface Ethernet0/1/0
ip address 10.1.3.1 255.255.255.0
undo shutdown
其它略
三、OSPF 多区域及 RIP 配置
[RT3]
评论0
最新资源