没有合适的资源?快使用搜索试试~ 我知道了~
固定管板式换热器设计说明文书
0 下载量 96 浏览量
2024-04-10
19:09:14
上传
评论
收藏 994KB DOC 举报
温馨提示
试读
31页
本设计是关于固定管板式换热器的构造设计,主要进展了换热器的工艺计算、换热器的构造和强度设计。 本设计的前半局部是工艺计算局部,按照GB150-2011以及GB151-2014等国家标准以及技术标准等根据给定的设计条件进展换热器的选型,校核传热系数,计算出实际换热面积。设计的后半局部主要是关于构造和强度的设计,根据已选定的换热器型式进展设备部各零部件〔如接收、定距管折流板、折流板、管箱等〕的设计,包括:材料的选择、具体的尺寸、确定具体的位置、管板厚度计算等。 本设计以本着平安可靠、经济性好、传热效率高以及保护环境为原那么进展的设计,符合工厂中的实际应用。 关于固定管板换热器设计的各个环节,本设计书中均有详细说明。
资源推荐
资源详情
资源评论
I / 31
摘 要
本设计是关于固定管板式换热器的设计,主要进展了换热器的工艺计算、换热
器的构造和强度设计。
本设计的前半局部是工艺计算局部,按照 GB150-2011 以及 GB151-2014 等国家
标准以及技术标准等根据给定的设计条件进展换热器的选型,校核传热系数,计算
出实际换热面积。设计的后半局部主要是关于构造和强度的设计,根据已选定的换
热器型式进展设备部各零部件〔如接收、定距管折流板、折流板、管箱等〕的设计,
包括:材料的选择、具体的尺寸、确定具体的位置、管板厚度计算等。
本设计以本着平安可靠、经济性好、传热效率高以及保护环境为原那么进展的
设计,符合工厂中的实际应用。
关于固定管板换热器设计的各个环节,本设计书中均有详细说明。
关键词:固定管板;管壳式换热器;设计
II / 31
Abstract
The design is fixed with respect to the structural design of the tube
plate heat exchanger, mainly for the process to calculate heat exchanger,
heat exchanger structure and strength design.
The first half of this design is part of the calculation process, in
accordance with GB150-2011 GB151-2014 and other national standards and
technical standards in accordance with a given design conditions of the heat
exchanger selection, check the heat transfer coefficient, to calculate the
actual heat area. The second half of the design is mainly on the structure
and strength of design, internal equipment all parts have been selected
according to the type of heat exchanger (such as receivership, spacer tube
baffles, baffles, pipe boxes, etc.) Design including: choice of materials,
specific dimensions, determine the specific location of the tube plate
thickness calculation.
On all aspects of the fixed tube sheet heat exchanger design, the design
specification is described in detail.
Key Words: fixed tube plate; shell and tube heat exchanger;Structural Design
III / 31
IV / 31
目 录
摘 要Ⅰ
Abstract.......................................................Ⅱ
第 1 章 设计任务、思想 1
1.1 设计任务 1
1.2 设计思想 1
第 2 章 换热器的工艺设计 2
2.1 换热器的工艺条件 2
2.2 估算设备尺寸 2
2.2.1 计算传热管数 NT2
2.2.2 计算壳程直径 D3
第 3 章换热器零部件的构造设计 4
3.1 换热管 4
3.1.1 换热管的型号和尺寸 4
3.1.2 换热管的材料 4
3.1.3 换热管排列方式以及管心距 4
3.2 折流板 5
3.2.1 折流板的主要几何参数 5
3.2.2 折流板和壳体间隙 6
3.2.3 折流板厚度 6
3.2.4 折流板的管孔 6
3.2.5 材料的选取 6
3.3 拉杆、定距管 6
3.3.1 拉杆的构造形式 7
3.3.2 拉杆直径、数量和尺寸 7
3.3.3 拉杆的布置 8
3.4 防冲板 8
3.5 接收 8
3.5.1 接收〔或接口〕的一般要求 8
3.5.2 接收高度〔伸出长度〕确定 8
3.6 管箱 9
3.7 管板构造尺寸 10
3.8 封头 11
V / 31
3.9 法兰构造类型 12
3.10 垫片的选取 12
3.11 鞍座的选取 12
第 4 章 换热器的机械构造设计 14
4.1 传热管与管板的连接 14
4.2 管板与壳体的连接 14
4.3 管板与管箱的连接 16
第 5 章 换热器的强度设计与校核 17
5.1 壳体、管箱的壁厚计算 17
5.1.1 壳体 17
5.1.2 管箱 18
第 6 章 局部管件零部件的校核计算 19
6.1 壳程圆筒 19
6.2 管箱圆筒 19
6.3 换热管 20
6.4 管板 20
6.5 管箱法兰 21
6.6 壳体法兰 21
6.7 系数 22
6.8 计算管板参数 22
第 7 章 换热器的制造、检验、安装与维护 24
7.1 换热器的制造、检验与验收 24
7.1.1 筒体 24
7.1.2 换热管 24
7.1.3 管板 25
7.1.4 折流板、支持板 25
7.1.5 管束的组装 25
7.1.6 换热器的组装 25
7.1.7 压力试验 25
7.2 换热器的安装、试车与维护 25
7.2.1 安装 25
7.2.2 试车 26
7.2.3 维护 26
完毕语 27
剩余30页未读,继续阅读
资源评论
智能码农【饮马翰海】
- 粉丝: 229
- 资源: 31
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功