用于OpenAnnePro2QMK端口的定制LED矩阵固件_C_Makefile_.zip

# Anne Pro 2 Shine! This is the custom LED firmware that goes along with the custom QMK firmware for Anne Pro 2. This firmware is still in early development. And will probably, but it provides the flexibility for creating custom effects. # Build and Flash **Warning: This will not work with the Obins Stock firmware** To build both C15 and C18 versions run `make` to build just C15 run `make C15` to build just C18 run `make C18` The resulting `.bin` files will be in the `build` directory named `annepro2-shine-C15.bin` and `annepro2-shine-C18.bin` respectively # Debugging You can debug the chip using jlink debugger or, in a limited way using a Black Magic Probe (BMP) debugger - which can be flashed onto a cheap and available STM evaluation boards. LED chip is to the left from the spacebar switch and has 5 pads to solder the SWD port, from the left: Unused?, reset, ground, clk, io. BMP can stop the program and investigate the current variables, but can't set breakpoints or step. # Contribute Thanks to @Stanley00 on the Anne Pro Dev discord for implementing the key mapping for the C18 revision, and @Rusty for mapping out the physical connection.