PyPI 官网下载 | flux_led-0.26.10.tar.gz

[![Python package][python-package-shield]][python-package] [![codecov][code-cover-shield]][code-coverage] \ [![Python Versions][python-ver-shield]][python-ver] [![PyPi Project][pypi-shield]][pypi]\ [![GitHub Activity][commits-shield]][commits] [![License][license-shield]](LICENSE)\ [![GitHub Top Language][language-shield]][language] ### led_flux.py This is a utility for controlling stand-alone Flux WiFi LED light bulbs. The protocol was reverse-engineered by studying packet captures between a bulb and the controlling "Magic Home" mobile app. The code here dealing with the network protocol is littered with magic numbers, and ain't so pretty. But it does seem to work! So far most of the functionality of the apps is available here via the CLI and/or programmatically. The classes in this project could very easily be used as an API, and incorporated into a GUI app written in PyQt, Kivy, or some other framework. #### Minimum python version 3.7 ##### Available: * Discovering bulbs on LAN * Turning on/off bulb * Get state information * Setting "warm white" mode * Setting single color mode * Setting preset pattern mode * Setting custom pattern mode * Reading timers (sync version only) * Setting timers (sync version only) * Sync clock (sync version only) * Music Mode for devices with a built-in microphone (asyncio version only) * Remote access administration (asyncio version only) ##### Some missing pieces: * Initial administration to set up WiFi SSID and passphrase/key. ##### Cool feature: * Specify colors with names or web hex values. Requires that python "webcolors" package is installed. (Easily done via pip, easy_install, or apt-get, etc.) Use --listcolors to show valid color names. ##### Installation: * Flux_led package available at https://pypi.python.org/pypi/flux-led/ ``` pip install flux_led easy_install flux_led ``` ##### Examples: ``` Scan network: flux_led -s Scan network and show info about all: flux_led -sSti Turn on: flux_led 192.168.1.100 --on flux_led 192.168.1.100 -192.168.1.101 -1 Turn on all bulbs on LAN: flux_led -sS --on Turn off: flux_led 192.168.1.100 --off flux_led 192.168.1.100 --0 flux_led -sS --off Set warm white, 75% flux_led 192.168.1.100 -w 75 -1 Set fixed color red : flux_led 192.168.1.100 -c Red flux_led 192.168.1.100 -c 255,0,0 flux_led 192.168.1.100 -c "#FF0000" Set preset pattern #35 with 40% speed: flux_led 192.168.1.100 -p 35 40 Set custom pattern 25% speed, red/green/blue, gradual change: flux_led 192.168.1.100 -C gradual 25 "red green (0,0,255)" Sync all bulb's clocks with this computer's: flux_led -sS --setclock Set timer #1 to turn on red at 5:30pm on weekdays: flux_led 192.168.1.100 -T 1 color "time:1730;repeat:12345;color:red" Deactivate timer #4: flux_led 192.168.1.100 -T 4 inactive "" Use --timerhelp for more details on setting timers ``` ##### Show help: ``` $ flux_led -h Usage: usage: __main__.py [-sS10cwpCiltThe] [addr1 [addr2 [addr3] ...]. A utility to control Flux WiFi LED Bulbs. Options: -h, --help show this help message and exit -s, --scan Search for bulbs on local network -S, --scanresults Operate on scan results instead of arg list -i, --info Info about bulb(s) state --getclock Get clock --setclock Set clock to same as current time on this computer -t, --timers Show timers -T NUM MODE SETTINGS, --settimer=NUM MODE SETTINGS Set timer. NUM: number of the timer (1-6). MODE: inactive, poweroff, default, color, preset, or warmwhite. SETTINGS: a string of settings including time, repeatdays or date, and other mode specific settings. Use --timerhelp for more details. Program help and information option: -e, --examples Show usage examples --timerhelp Show detailed help for setting timers -l, --listpresets List preset codes --listcolors List color names Power options (mutually exclusive): -1, --on Turn on specified bulb(s) -0, --off Turn off specified bulb(s) Mode options (mutually exclusive): -c COLOR, --color=COLOR Set single color mode. Can be either color name, web hex, or comma-separated RGB triple -w LEVEL, --warmwhite=LEVEL Set warm white mode (LEVEL is percent) -p CODE SPEED, --preset=CODE SPEED Set preset pattern mode (SPEED is percent) -C TYPE SPEED COLORLIST, --custom=TYPE SPEED COLORLIST Set custom pattern mode. TYPE should be jump, gradual, or strobe. SPEED is percent. COLORLIST is a space- separated list of color names, web hex values, or comma-separated RGB triples ``` ### Supported Models The following models have been tested with library. | Model | Description | Notes | | ----- | --------------------------- | ------------------------------- | | 0x04 | UFO Controller RGBW | | | 0x06 | Controller RGBW | | | 0x07 | Controller RGBCW | | | 0x08 | Controller RGB with MIC | | | 0x09 | Switch 1c | | | 0x0E | Floor Lamp RGBCW | | | 0x1C | Table Light CCT | | | 0x21 | Bulb Dimmable | | | 0x25 | Controller RGB/WW/CW | Supports RGB,RGBW,RGBWW,CW,DIM | | 0x33 | Controller RGB | | | 0x35 | Bulb RGBCW | | | 0x41 | Controller Dimmable | | | 0x44 | Bulb RGBW | | | 0x54 | Downlight RGBW | | | 0x93 | Switch 1c | | | 0x94 | Switch 1c Watt | | | 0x97 | Socket 1c | | | 0xA1 | Addressable v1 | | | 0xA2 | Addressable v2 | | | 0xA3 | Addressable v3 | | ### Unsupported Models The following models have not been tested with library but may work. | Model | Description | Notes | | ----- | --------------------------- | ------------------------------- | | 0x09 | Ceiling Light CCT | | | 0x10 | Christmas Light | | | 0x16 | Magnetic Light CCT | | | 0x17 | Magnetic Light Dimmable | | | 0x19 | Socket 2 USB | | | 0x1A | Christmas Light | | | 0x18 | Plant Light | | | 0x1B | Spray Light | | | 0x52 | Bulb CCT | May be discontinued | | 0x95 | Switch 2c | | | 0x96 | Switch 4c | | | 0xD1 | Digital Light | | | 0xE1 | Ceiling Light | | | 0xE2 | Ceiling Light Assist | | ### File Structure device.py -> contains code to manip