/**
******************************************************************************
* @file stm32f10x_tim.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the TIM firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_tim.h"
#include "stm32f10x_rcc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup TIM
* @brief TIM driver modules
* @{
*/
/** @defgroup TIM_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Defines
* @{
*/
/* ---------------------- TIM registers bit mask ------------------------ */
#define SMCR_ETR_Mask ((uint16_t)0x00FF)
#define CCMR_Offset ((uint16_t)0x0018)
#define CCER_CCE_Set ((uint16_t)0x0001)
#define CCER_CCNE_Set ((uint16_t)0x0004)
/**
* @}
*/
/** @defgroup TIM_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_FunctionPrototypes
* @{
*/
static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
/**
* @}
*/
/** @defgroup TIM_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Functions
* @{
*/
/**
* @brief Deinitializes the TIMx peripheral registers to their default reset values.
* @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
* @retval None
*/
void TIM_DeInit(TIM_TypeDef* TIMx)
{
/* Check the parameters */
assert_param(IS_TIM_ALL_PERIPH(TIMx));
if (TIMx == TIM1)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE);
}
else if (TIMx == TIM2)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE);
}
else if (TIMx == TIM3)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE);
}
else if (TIMx == TIM4)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE);
}
else if (TIMx == TIM5)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE);
}
else if (TIMx == TIM6)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE);
}
else if (TIMx == TIM7)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE);
}
else if (TIMx == TIM8)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE);
}
else if (TIMx == TIM9)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE);
}
else if (TIMx == TIM10)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE);
}
else if (TIMx == TIM11)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE);
}
else if (TIMx == TIM12)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE);
}
else if (TIMx == TIM13)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE);
}
else if (TIMx == TIM14)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE);
}
else if (TIMx == TIM15)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE);
}
else if (TIMx == TIM16)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE);
}
else
{
if (TIMx == TIM17)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE);
}
}
}
/**
* @brief Initializes the TIMx Time Base Unit peripheral according to
* the specified parameters in the TIM_TimeBaseInitStruct.
* @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
* @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef
* structure that contains the configuration information for the
* specified TIM peripheral.
* @retval None
*/
void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
{
uint16_t tmpcr1 = 0;
/* Check the parameters */
assert_param(IS_TIM_ALL_PERIPH(TIMx));
assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode));
assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision));
tmpcr1 = TIMx->CR1;
if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)||
(TIMx == TIM4) || (TIMx == TIM5))
{
/* Select the Counter Mode */
tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS)));
tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode;
}
if((TIMx != TIM6) && (TIMx != TIM7))
{
/* Set the clock division */
tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD));
tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision;
}
TIMx->CR1 = tmpcr1;
/* Set the Autoreload value */
TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ;
/* Set the Prescaler value */
TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler;
if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17))
{
/* Set the Repetition Counter value */
TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter;
}
/* Generate an update event to reload the Prescaler and the Repetition counter
values immediately */
TIMx->EGR = TIM_PSCReloadMode_Immediate;
}
/**
* @brief Initializes the TIMx Channel1 according to the specified
* parameters in the TIM_OCInitStruct.
* @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
* @param TIM_OCInitStru
没有合适的资源?快使用搜索试试~ 我知道了~
基于stm32的两路ADC采集
共141个文件
h:36个
c:34个
d:17个
5星 · 超过95%的资源 需积分: 34 94 下载量 4 浏览量
2015-08-05
14:17:09
上传
评论 3
收藏 1.91MB RAR 举报
温馨提示
本工程是基于stm32F103RC单片机的两路ADC采集,并可以早显示屏上显示,在开发板上验证过绝对正确。
资源推荐
资源详情
资源评论
收起资源包目录
基于stm32的两路ADC采集 (141个子文件)
ADC.uvgui.admin 137KB
ADC.uvgui.Administrator 69KB
ADC.axf 810KB
ADC.uvgui_admin.bak 72KB
ADC_uvproj.bak 18KB
ADC_uvopt.bak 15KB
keilkilll.bat 399B
stm32f10x_tim.c 107KB
lcd.c 83KB
stm32f10x_flash.c 61KB
stm32f10x_rcc.c 50KB
stm32f10x_adc.c 46KB
stm32f10x_i2c.c 45KB
stm32f10x_can.c 44KB
stm32f10x_usart.c 37KB
system_stm32f10x.c 36KB
stm32f10x_fsmc.c 35KB
stm32f10x_spi.c 30KB
stm32f10x_dma.c 29KB
stm32f10x_dma.c 29KB
stm32f10x_sdio.c 28KB
stm32f10x_gpio.c 23KB
stm32f10x_dac.c 19KB
core_cm3.c 17KB
stm32f10x_cec.c 11KB
stm32f10x_pwr.c 9KB
stm32f10x_rtc.c 8KB
stm32f10x_bkp.c 8KB
misc.c 7KB
stm32f10x_exti.c 7KB
stm32f10x_wwdg.c 6KB
usart.c 5KB
stm32f10x_dbgmcu.c 5KB
adc.c 5KB
delay.c 5KB
stm32f10x_iwdg.c 5KB
stm32f10x_crc.c 3KB
stm32f10x_it.c 2KB
main.c 1KB
led.c 1KB
sys.c 616B
lcd.crf 305KB
main.crf 266KB
stm32f10x_dma.crf 259KB
adc.crf 258KB
stm32f10x_adc.crf 256KB
stm32f10x_rcc.crf 256KB
stm32f10x_usart.crf 255KB
usart.crf 255KB
stm32f10x_gpio.crf 253KB
system_stm32f10x.crf 250KB
delay.crf 250KB
led.crf 250KB
sys.crf 249KB
misc.crf 249KB
stm32f10x_it.crf 249KB
core_cm3.crf 4KB
main.d 895B
lcd.d 854B
stm32f10x_usart.d 778B
stm32f10x_gpio.d 763B
stm32f10x_adc.d 748B
stm32f10x_rcc.d 748B
usart.d 712B
adc.d 697B
stm32f10x_dma.d 678B
system_stm32f10x.d 676B
stm32f10x_it.d 663B
delay.d 651B
led.d 619B
misc.d 613B
sys.d 580B
core_cm3.d 104B
startup_stm32f10x_hd.d 63B
ADC_Target 1.dep 16KB
stm32f10x.h 619KB
core_cm3.h 84KB
stm32f10x_tim.h 51KB
FONT.H 34KB
stm32f10x_rcc.h 30KB
stm32f10x_i2c.h 29KB
stm32f10x_can.h 27KB
stm32f10x_fsmc.h 26KB
stm32f10x_flash.h 25KB
stm32f10x_sdio.h 21KB
stm32f10x_adc.h 21KB
stm32f10x_dma.h 20KB
stm32f10x_dma.h 20KB
stm32f10x_gpio.h 20KB
stm32f10x_spi.h 17KB
stm32f10x_usart.h 16KB
stm32f10x_dac.h 15KB
lcd.h 11KB
misc.h 9KB
stm32f10x_bkp.h 7KB
stm32f10x_exti.h 7KB
stm32f10x_cec.h 6KB
stm32f10x_pwr.h 4KB
stm32f10x_rtc.h 4KB
stm32f10x_iwdg.h 4KB
共 141 条
- 1
- 2
资源评论
- 洪蛋蛋2023-07-28:这篇文件结合了理论和实践,将复杂的ADC采集原理简单易懂地呈现出来,对初学者非常友好。
- 张景淇2023-07-28:这篇文件详细介绍了基于stm32的两路ADC采集方法,让我对硬件采集有了更深入的了解。
- kdbshi2023-07-28:作者对ADC采集的注意事项进行了详细说明,让我在实际操作中避免了很多问题,非常实用。
- 那你干哈2023-07-28:作者对采集原理进行了清晰的阐述,使我可以快速上手实践,非常实用。
- 王向庄2023-07-28:文件中提供的示例代码能够帮助我快速理解并应用ADC采集,对项目开发非常有帮助。
qq_30378499
- 粉丝: 1
- 资源: 1
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功