CTF咏春招新赛题目及write up下载

README.TXT NOTES ON MS-DOS 6.22 ==================== This file provides important information not included in the MICROSOFT MS-DOS USER'S GUIDE or in MS-DOS Help. This file is divided into the following major sections: 1. Setup 2. MemMaker, EMM386, and Memory Management 3. Windows 4. Hardware Compatibility with MS-DOS 6.22 5. Microsoft Backup, Defrag and Anti-Virus 6. Third-Party Programs 7. DriveSpace If the subject you need information about doesn't appear in this file, you might find it in one of the following text files included with MS-DOS: * OS2.TXT, which describes how to remove and save data on your computer when you replace OS/2 with MS-DOS 6.22. * NETWORKS.TXT, which describes how to update your network software for use with MS-DOS 6.22. * COUNTRY.TXT, which provides details about enhancements to the international keyboard and codepage (character set) support included with MS-DOS 6.22. For information about new features, type HELP WHATSNEW at the command prompt. This file contains the following topics: 1. Setup 1.1 SpeedStor 1.2 Incompatible Hard Disk or Device Driver 1.3 AT&T 6300 Computer 1.4 Toshiba with a Hard RAM Disk 1.5 Tandy with ROM DOS 1.6 Setup displays the "Your computer uses a disk-compression program that is incompatible with Setup" message. 1.7 You deleted files from the directory that Setup needs to install the optional Windows programs. 1.8 Running Setup if Your Computer Uses Windows NT 1.9 Setup detects that your computer has a non-MS-DOS partition or non-MS-DOS files, and your computer uses Windows NT. 1.10 Setup displays the "Your computer uses password protection" screen. 1.11 Setup displays the "Your computer is using an incompatible delete-protection program" screen. 1.12 Setup detects that your computer uses DR DOS. 1.13 Installing MS-DOS on a Drive Other Than C 1.14 Bypassing the Uninstall Disk and Using Default Setup Options 1.15 Installing MS-DOS on a System with a CorelSCSI UNI_ASP.SYS Driver 1.16 Installing MS-DOS if you have DrivePro or EZ-Drive 1.17 Setup displays the "There is not enough disk space" screen and you are running PC-DOS version 6.1 1.18 Setup cannot update a file 1.19 Upgrading from PC-DOS 6.1 1.20 Changes to International Keyboard and Character Set Support 2. MemMaker, EMM386, and Memory Management 2.1 Intel Expanded-Memory Driver (EMM.SYS) 2.2 Running MemMaker on a Computer with PC-NFS 2.3 You have a Super VGA display and want to conserve memory. 2.4 Using MemMaker with IBM LAN 2.5 MemMaker and Adaptec SCSI devices 2.6 Running MemMaker on a computer with PC Tools RAMBoost 2.7 EMM386 detects an error in an application 2.8 MemMaker no longer aggressively scans upper memory by default 3. Windows 3.1 Your computer uses a Windows 3.0 permanent swap file. 3.2 Using compressed floppy disks with Windows File Manager 4. Hardware Compatibility with MS-DOS 6.22 4.1 Compaq EXTDISK.SYS Driver 4.2 Hardcard 4.3 Toshiba 5. Microsoft Backup, Defrag and Anti-Virus 5.1 Microsoft Anti-Virus 5.2 Running Microsoft Backup for MS-DOS under Windows 5.3 Backup for Windows stops running at the end of the compatibility test 5.4 Running Microsoft Backup with TI4000 and Gateway NOMAD computers 5.5 MS-DOS 6.22 Backup Cannot Restore 6 or 6.2 Backups 5.6 Microsoft Defragmenter 6. Third-party Programs 6.1 4DOS and NDOS 6.2 Above Board 286 and Above Board Plus Installation Programs 6.3 CodeView 6.4 Colorado Tape Backup 6.5 Fastback Plus 6.6 Norton Desktop for Windows 2.0 6.7 Norton Utilities 6.8 PC Tools 6.9 QEMM's Stealth DoubleSpace Feature 6.10 Johnson Computer Systems PC-Vault and PC-Vault Plus 6.11 AddStor DoubleTools 7. DriveSpace 7.1 Converting DoubleSpace Drives to DriveSpace 7.2 Converting Your XtraDrive Disk-Compression Software to DriveSpace 7.3 Converting Stacker 3.1 Software to DriveSpace 7.4 Converting Other Disk-Compression Software to DriveSpace 7.5 DriveSpace Setup indicates that your computer is running an incompatible disk-caching program. 7.6 Your compressed drive runs out of disk space. 7.7 Your uncompressed (host) drive runs out of disk space. 7.8 DriveSpace did not compress all of your files because the drive ran out of disk space. 7.9 Windows displays the message "The permanent swap file is corrupt." 7.10 EXTDISK.SYS displays a warning about drive letters. 7.11 You need a special device driver to use your startup drive. 7.12 Defragmenting uncompressed drives after changing file attributes 7.13 Files DriveSpace cannot compress 7.14 Microsoft Defragmenter runs out of memory while you are compressing a drive. 7.15 DriveSpace and PC-Vault 7.16 Maximum size of a compressed drive 7.17 DriveSpace could not mount a drive due to problems with the drive 7.18 DriveSpace finishes installation, but you cannot access your Hardcard. 7.19 You receive a DoubleGuard Alarm message 7.20 A compressed drive is currently too fragmented to mount 7.21 DriveSpace displays the message "Your computer is running with an incompatible version of DRVSPACE.BIN" 7.22 Using the DRVSPACE command after bypassing DRVSPACE.BIN 7.23 Removing the write-protection from a compressed floppy disk 7.24 Automounting and Norton Disk Cache 7.25 Undelete utilities and DriveSpace 7.26 Creating an Emergency Startup Disk for DriveSpace Systems 7.27 If ScanDisk Cannot Check or Repair a DoubleSpace Volume File 7.28 DoubleSpace and the DRVSPACE.MR1 File 7.29 Using unconverted DoubleSpace drives with DriveSpace 1. SETUP ======== 1.1 SpeedStor ------------- If Setup referred you to this section and your computer has an OS/2 partition created by using the FDISKPM utility in OS/2 2.1, run MS-DOS Setup by typing SETUP /U at the command prompt. If Setup referred you to this section and you have neither OS/2 nor a SpeedStor partition on your computer, see the section "Setup displays the Incompatible Hard Disk or Device Driver screen" in the "Diagnosing and Solving Problems" chapter of the MS-DOS User's Guide. If you do have a SpeedStor partition on your computer, Setup probably referred you to this section for one of the following reasons: * Setup could not find in your CONFIG.SYS file a command for the device driver that supports your SpeedStor partition. If this is the case, add the command line to your CONFIG.SYS file, restart your computer, and run Setup. For more information about adding the command line to your CONFIG.SYS file, see your SpeedStor documentation. * Your CONFIG.SYS file has a DEVICE=HARDRIVE.SYS line in it. If this is the case, carry out the following procedure: 1. Use the EXPAND command to expand and copy the SSTOR.SYS file to your hard disk. Make sure you copy the SSTOR.SYS file to the same path as the HARDRIVE.SYS file. See the PACKING.LST file on Setup Disk 1 for the location of the SSTOR.SYS file on the Setup disks and for instructions on how to expand and copy it to your hard disk. 2. Replace the DEVICE=HARDRIVE.SYS command with a DEVICE=SSTOR.SYS command. For example, if the command that loaded the HARDRIVE.SYS file was DEVICE=C:\SSTOR\HARDRIVE.SYS, you would replace it with DEVICE=C:\SSTOR\SSTOR.SYS. 3. Restart your computer. 4. Make sure you can access your hard disk. 5. Run Setup. 1.2 Incompatible Hard Disk or Device Driver ------------------------------------------- If Setup referred you to this section, and no other section in this file is relevant to your system, you have a partition that is incompatible with MS-DOS 6.22. Y