拓新办公楼设计
摘要
本工程为 xxxx 限公司的拟建办公楼，建筑设计为四层，建筑面积一共为 4402.48
平方米，楼房标高为 19.8 米。一层主要设计为大厅，接待室和设备用房，二至五层为
标准办公用房。建筑采用比较规则的柱网设计，为办公空间的灵活组合划分提供条件，
亦对工程造价提供了较为经济的的方案。本工程结构设计采用多层钢筋混凝土框架结构，
基本步骤为：结构计算简图的确定；荷载计算；内力分析；内力组合；梁、柱截面配筋、
板的设计、基础的设计以及结构施工图的绘制等。其中，内力计算只考虑恒荷载和活荷
载；柱、板的设计采用弹性理论；梁的设计采用塑性理论；基础选用柱下独立基础。在
进行截面设计时，遵循了强剪弱弯，强柱弱梁，强节点弱构件的设计原则，且满足构造
要求，除对本框架进行手算外，还利用了 PKPM 对本结构进行了电算。
本设计从建筑到结构是一个较为完整的设计过程，通过毕业设计复习和巩固了以前
所学知识，把主要课程联系成一个完整的体系，并运用于设计中；本次毕业设计培养了
我进行独立设计的基本能力，为毕业后的工作打下了坚实的基础。
关键词：框架结构；混凝土；建筑设计；结构设计
Design of Office Building for TuoXin
ABSTRACT
The engineering is planned for a proposed office building for Tuoxin. which is divided
into five stories. The building covers a total construction area of 4402.48 square meters and
stands a ground elevation of 19.8 meters. The first storey includes the hall, reception room
and spare room, while from the second storey to fifth storey are standard office. The
building uses regular pillars net design, resulting in flexible combination and division for
office space and a more economical scheme for the project .
The design of engineering structures using multi-storey reinforced concrete frame
structure, the basic steps are: the determination of the structure of the calculation diagram;
load calculation; internal force analysis; combination of internal forces; beams, reinforced
concrete column cross section, board design, basic design and structural mapping, such as
construction. Among them, the internal force calculation concerns the constant load and live
load only. The column and board design use a flexible plate theory; beam design uses plastic
theory; The basis uses column-under single foundation. Seismic design in cross section,
follows the design principles of strong bent weak shear, weak beam strong column and strong
node weak component, and meet the construction requirements meanwhile. Moreover, the
structure computerization is shown by using PKPM.
From construction to the design of structure is a rather complete design process.
Through design review and consolidation of the previous knowledge, the main courses
are linked into a complete system and used in this design; The Graduation Project has
trained me in the basic ability of independent design ,which lays down a solid foundation
for the work after graduate.
Keywords: Frame Structure; Concrete; Architectural Design; Structure Design
目录
1 建筑设计说明.........................................................................................................................1
1.1 设计依据 ...........................................................................................................................1
1.2 设计构思 ...........................................................................................................................1
1.3 工程概况 ...........................................................................................................................1
1.4 设计资料 ...........................................................................................................................2
1.4.1 工程地质条件.............................................................................................................2
1.4.2 气象资料.....................................................................................................................2
1.4.3 抗震设防烈度.............................................................................................................2
1.4.4 材料.............................................................................................................................2
1.4.5 建筑装修标准.............................................................................................................2
2 结构设计.................................................................................................................................4
2.1 结构平面布置 ...................................................................................................................4
2.1.1 结构方案的确定.........................................................................................................4
2.1.2 基础类型的确定.........................................................................................................4
2.2 结构构件截面尺寸确定 ...................................................................................................4
2.3 框架计算简图 ..................................................................................................................6
2.4 荷载计算 ..........................................................................................................................8
2.4.1 屋面均布恒载..........................................................................................................8
2.4.2 楼面均布恒载..........................................................................................................8
2.4.3 活荷载......................................................................................................................9
2.4.4 楼面均布活载............................................................................................................9
2.4.5 梁柱自重..................................................................................................................9
2.4.6 墙体自重..................................................................................................................11
2.5 水平地震力作用下框架侧移计算 ................................................................................13
2.5.1 横梁线刚度..............................................................................................................13
2.5.2 横向框架柱的侧移刚度 D 值..................................................................................14
2.5.3 横向框架自振周期..................................................................................................15
2.5.4 横向地震作用计算...................................................................................................16
2.5.5 横向框架抗震变形验算..........................................................................................17
2.6 水平地震作用下横向框架的内力分析 ........................................................................18
2.7 风荷载...........................................................................................................................21
2.7.1 基本信息...................................................................................................................21
2.7.2 横向框架在风荷载作用下的位移计算..................................................................23
2.7.3 风荷载作用下横向框架的内力分析......................................................................23
2.8 竖向荷载作用下横向框架的内力分析 .........................................................................26
2.8.1 荷载计算..................................................................................................................27
2.8.2 横向框架在恒荷载作用下的内力计算..................................................................32
2.8.3 横向框架在活荷载作用下的内力计算..................................................................41
3 内力组合...............................................................................................................................49
3.1 横向框架梁内力组合 ....................................................................................................49
3.2 框架梁弯矩调幅 ............................................................................................................49
3.3 框架梁内力组合 ............................................................................................................60
3.4 框架柱内力组合 ............................................................................................................64
4 梁柱截面设计及配筋计算...................................................................................................69
4.1 设计信息 .........................................................................................................................69
4.2 正截面承载力计算 .........................................................................................................69
4.3 梁斜截面承载力计算 ....................................................................................................73
4.4 柱的配筋计算 ................................................................................................................76
4.5 框架柱正截面承载力计算 ............................................................................................77
4.6 柱斜截面受剪计算 ........................................................................................................82
5 其他构件设计.......................................................................................................................83
5.1 板的配筋计算 ................................................................................................................83
5. 1.1 板区划分..................................................................................................................83
5.1.2 板配筋计算..............................................................................................................84
5.2 楼梯设计 ........................................................................................................................87
5.2.1 楼梯设计资料...........................................................................................................87
5.2.2 楼梯梯段斜板设计...................................................................................................88
5. 2.3 平台板设计..............................................................................................................89
5.2.4 平台梁设计...............................................................................................................91
5. 3 基础设计 ........................................................................................................................92
5.3.1 设计说明...................................................................................................................92
5.3.2 荷载计算...................................................................................................................93
5.3.3 地基承载力设计值的确定.......................................................................................93
5. 3.4 边柱独立基础设计..................................................................................................93
5. 3.5 中柱联合基础设计..................................................................................................96
6 PKPM 电算结果....................................................................................................................100
参考文献.................................................................................................................................112
致谢.........................................................................................................................................113
附录.........................................................................................................................................114
