没有合适的资源?快使用搜索试试~ 我知道了~
华为S2326POE最终配置文件
需积分: 31 8 下载量 143 浏览量
2018-07-06
08:32:50
上传
评论
收藏 5KB TXT 举报
温馨提示
试读
6页
华为S2326POE最终配置文件给AP供电,vlan划分,恢复出厂等命令
资源推荐
资源详情
资源评论
在用户视图下,执行命令reset saved-configuration,清除当前加载的配置文件的内容。
如果交换机当前启动与下次启动的配置文件一致,执行该命令将同时清除这两个配置文件。交换机下次启动采用缺省配置文件。
如果交换机当前启动与下次启动的配置文件不一致,执行该命令将清除当前启动的配置文件。
如果交换机当前启动的配置文件为空,执行该命令后,系统将提示配置文件不存在。
配置文件被清除后,如果不使用startup saved-configuration configuration-file命令重新指定含有正确配置信息的配置文件,或者不使用save命令保存配置文件,则交换机下次启动时,将采用缺省的配置参数进行初始化。
具体操作如下:
<Huawei>reset saved-configuration //重置保存的配置文件
Warning: The action will delete the saved configuration in the device.
The configuration will be erased to reconfigure. Continue? [Y/N]:y //这里问你确认要清除配置吗?选Y
Warning: Now clearing the configuration in the device.
Jul 26 2015 17:42:59-08:00 Huawei %%01CFM/4/RST_CFG(l)[1]:The user chose Y when deciding whether to reset the saved configuration.
Info: Succeeded in clearing the configuration in the device. //这边提示成功清除设备配置
<Huawei>reboot //使用reboot命令重启设备
Info: The system is now comparing the configuration, please wait.
Warning: All the configuration will be saved to the configuration file for the ne
xt startup:, Continue?[Y/N]:n //这里问你是否要在重启前保存配置文件,这边记得要选N,不然刚清除的配置又被写入。
Info: If want to reboot with saving diagnostic information, input 'N' and then ex
ecute 'reboot save diagnostic-information'.
System will reboot! Continue?[Y/N]:y //这里输入Y确认重启
重启完成后设备会加载默认配置
接口模式下 undo poe enable
不用设置速度,甚至连trunk口也不要建就可以
interface Ethernet0/0/1
undo port default vlan
undo ntdp enable
undo ndp enable
port link-type trunk
port trunk allow-pass vlan 2 to 4094
quit
vlan batch 3 1000
undo info-center enable
interface Ethernet0/0/1
port link-type trunk
port trunk pvid vlan 1000
port trunk allow-pass vlan all
quit
interface Ethernet0/0/2
port link-type trunk
port trunk pvid vlan 1000
port trunk allow-pass vlan all
quit
interface Ethernet0/0/3
port link-type trunk
port trunk pvid vlan 1000
port trunk allow-pass vlan all
quit
interface Ethernet0/0/4
port link-type trunk
port trunk pvid vlan 1000
port trunk allow-pass vlan all
quit
interface Ethernet0/0/5
port link-type trunk
quit
vlan batch 3 1000
undo info-center enable
interface Ethernet0/0/1
port link-type trunk
port trunk pvid vlan 1000
port trunk allow-pass vlan all
quit
interface Ethernet0/0/2
port link-type trunk
port trunk pvid vlan 1000
port trunk allow-pass vlan all
quit
interface Ethernet0/0/3
port link-type trunk
port trunk pvid vlan 1000
port trunk allow-pass vlan all
quit
interface Ethernet0/0/4
port link-type trunk
port trunk pvid vlan 1000
port trunk allow-pass vlan all
quit
interface Ethernet0/0/5
port link-type trunk
剩余5页未读,继续阅读
资源评论
qq_25651063
- 粉丝: 0
- 资源: 1
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功