没有合适的资源?快使用搜索试试~ 我知道了~
基于plc的三层电梯控制系统.docx
1.该资源内容由用户上传,如若侵权请联系客服进行举报
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
版权申诉
5星 · 超过95%的资源 1 下载量 142 浏览量
2023-11-02
00:20:24
上传
评论 1
收藏 925KB DOCX 举报
温馨提示
试读
39页
基于plc的三层电梯控制系统
资源推荐
资源详情
资源评论
I
摘要
随着我国国民经济的快速发展,现代化程度日益提高。有更多的高层建筑和
更多的电梯。中国电梯产品现状人民的物质文化生活也得到了改善。我国传统的
电梯控制是由继电器和接触器组成的。它不仅具有可靠性差的缺点。Y,成本高,
故障率高,但随着建筑层数的增加,也给制造和安装带来了很大的不便。若采用
PLC 控制解决上述问题短处,缺点。
首先,分别介绍了电梯继电器控制和 PLC 控制的特点,突出了继电器电梯
控制系统所暴露出的不足和 PLC 的优点。电梯控制系统其次,在查阅国内外大
量相关文献的基础上,对电梯技术和电梯设备的发展进行了综述。然后进去介绍
了 PLC 的选择原理和 PLC 控制系统的设计思想;在此基础上,根据电梯系统自
身的工作状态要求,开发了电梯系统 PLC 软件。简述了软件开发的特点,结合 PLC
自身的控制规律,设计了能够实现一定功能的 PLC 电梯控制系统。
本设计以 PLC 为工具对电梯的各种操作进行控制。首先,对三层电梯的硬
件部分进行了分析,看看是什么样的开关,信号等等。然后,绘制自己的控制面
板图,根据 I/O 点确定 PLC 的模型,最后进行原设计,绘制程序流程图,编写
梯形图,然后在计算机上进行仿真。
关键词:PLC 电梯控制系
II
Abstract
With the rapid development of our national economy, the degree of
modernization is increasing day by day. There are more high-rise buildings
and more elevators. The current situation of elevator products in China
has also improved the material and cultural life of the people. The
traditional elevator control in our country is composed of relay and
contactor. It not only has the disadvantage of poor reliability, Y, high
cost, high failure rate, but also brings great inconvenience to
manufacture and installation with the increase of building floors. If PLC
control is used to solve the above problems, shortcomings (plural noun
of shortcoming).
Firstly, the characteristics of elevator relay control and PLC
control are introduced respectively, highlighting the shortcomings of
relay elevator control system and the advantages of PLC. Secondly, the
development of elevator technology and equipment is summarized on the
basis of consulting a large number of relevant literatures at home and
abroad. Then the selection principle of PLC and the design idea of PLC
control system are introduced. On this basis, the elevator system PLC
software is developed according to the working state of elevator system
itself. This paper briefly describes the characteristics of software
development, and designs a PL which can realize certain functions
according to the control law of PLC itself. C elevator control system.
This design takes PLC as a tool to control all kinds of operation of
elevator. First, the hardware part of the three-storey elevator is
analyzed to see what kind of switch, signal and so on. Then, the control
panel diagram is drawn, the model of PLC is determined according to the
I O point. Finally, the original design is carried out, the program flow
chart is drawn, the ladder diagram. R diagram is compiled, and then the
simulation is carried out on the computer.
KEY WORDS:PLC elevator control system
目 录
1
目录
5 程 序 仿 真
2
1 绪论
随着城市建设的不断发展和高层建筑数量的不断增加,电梯在国民经济和生
活中得到了广泛的应用。电梯作为垂直运输运输工具在高层建筑中,一直与人们
的日常生活密不可分.实际上,电梯是根据外部呼叫信号和自己的控制规则等操
作的。是随机的。电梯实际上是一个人机交互控制系统,单靠顺序控制或逻辑控
制是无法满足控制要求的。目前,电梯控制一般采用两种方式。一种是以微机为
信号控制单元,完成电梯信号的采集、运行状态和功能设置,实现电梯自动控制。
调度和操作功能的选择。第二种控制方法是用可编程控制器(PLC)代替微机来实
现信号选配控制。TH 这两种方法在控制方式和性能上没有太大的差别。国内厂
家大多选择第二种方式,原因是生产规模小,其微机控制装置的设计制造成本较
高,但 P LC 可靠性高,程序设计方便灵活,抗干扰能力强,电梯运动稳定等特
点,因此目前电梯控制系统广泛采用可编程控制器来实现。
总之,电梯控制是比较复杂的。在计算机诞生前的几十年里,继电控制系统
在电梯控制的发展中发挥了巨大的作用。然而,它的控制其性能和自身的功能已
经不能满足和适应电梯控制的要求和发展。在电梯由继电器接触器控制的时代,
它是由继电器接触器控制的。设计高质量的电梯控制系统。但是现在,可编程控
制器的使用为电梯控制提供了更广阔的空间。P L C 是专门为工业生产而设计的。
随着 PLC 应用技术的不断发展,控制和控制设备将使其体积小、功能完善、过
程控制更加稳定、可靠和抗干扰。性能的提高,机电元件结合在一起,把设备、
仪器、电子和计算机的功能结合在一起。因此,它已经成为电梯运行的关键技术
之一。
5 程 序 仿 真
3
2 电梯的概述
2.1 电梯结构
电梯是以下好几部分组成:(1)电梯井道;(2)电梯机房;(3)井地道
坑:井地道坑在最底层平面标高下≥1.4 m,成为轿厢在下降时所需的缓冲器的
安装空间;(4)组成电梯的有关部件;轿厢;(5)井壁导轨和导轨支架;(6)
牵引轮及其钢支架、钢丝绳、平衡锤、轿厢开关门、检修起重吊钩等;(7)有
关电器部件。
剩余38页未读,继续阅读
资源评论
- dthgftyfctyuf2024-03-19简直是宝藏资源,实用价值很高,支持!
毕业程序员
- 粉丝: 8996
- 资源: 1890
下载权益
C知道特权
VIP文章
课程特权
开通VIP
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功