联想ih61m v1.0 主板bios固件，版本 9QKT39A，添加了Nvme驱动，bios版本信息是9qkt开头的都可以刷

--CONTENTS-- 1 - Installation Instructions 2 - Flash under Operating System 3 - Flash Program Options 4 - Flashing Back to an Older Level of BIOS 5 - AMIDEWIN - AMIBIOS DMI Editor for Windows ***************************************************************************** * 1. Installation Instructions * * * * Please print out these instructions or write them down before * * starting this flash update utility. * * * * This flash under operating system (32-bit/64-bit) utility provides * * the ability to update the system flash from a windows application. * * * * The utility may be downloaded from the internet and unpacked into * * the default path: "C:\SWTOOLS\FLASH\9QJYxxUSA", where "xx" * * represents the two digit flash level. After unpacking the utility, * * run "afuwingui.exe" from the default path to launch the windows * * based flash application to update your system. * * * ***************************************************************************** ***************************************************************************** * 2. Flash Under Operating System * * * * 1. Please make note of any settings you have changed in the BIOS * * Setup utility. They may have to be re-entered after updating * * the BIOS. * * * * 2. In the application graphical user interface, press button "Open" * * and select the BIOS ROM image "imagexx.rom", where "xx" * * represents the two digit flash level. Then in the page "Setup", * * make sure the option "Main BIOS Image", "NVRAM" and * * "Preserve Setup" are selected. At last, press button "Flash" to * * start the update process. When the update process is complete, * * press button "Exit" to exit the application. * * * * 3. Update may take up to 2 minutes. Do not power off or restart * * the system during this procedure! It is highly recommended to * * reboot your system after the update. * * * ***************************************************************************** ***************************************************************************** * 3. Flash Program Options * * * * The default operation of the flash update program is to use the * * graphical user interface provided by the AFUWINGUI program. You can * * also run the program from a DOS command box (with Administrator * * privilege) by running "flash.cmd". Before running the "flash.cmd", * * please change the command line to the options you need. The command * * is: * * * * wflash2.exe [option1] [option2] ... [optionX] * * * * [OPTIONS] * * /h Show help messages. * * /rsmb Preserve all SMBIOS structures. * * /clr Clear BIOS settings. * * /ign Ingore BIOS version check. * * /sn:nnnnnnn Update system serial number (up to 20 characters). * * /csn:nnnnnnn Update chassis serial number (up to 20 characters). * * /mtm:nnnnnnn Update machine type and model number (up to 20 * * characters). * * /tag:nnnnnnn Update system asset tag (up to 25 characters). * * /uuid The flash utility will generate an Universally * * Unique Identifier (UUID), replacing the one that * * is currently in the system. * * /logo:<filename> Change logo. The max supported size of logo file * * is displayed on the screen during the compressing. * * /cpu Update CPU microcode. * * /reboot Automatic reboot after all requests done. * * /pass:nnnnnnn Input current system password. * * * * The following example shows how to update system asset tag number * * to "1234567" use command line: * * wflash2.exe /tag:1234567 * * * * The following example shows how to update bios and update system * * asset tag number by one command: * * wflash2.exe bios.rom /tag:1234567 * * * * The following example shows how to change the power-on logo. * * wflash2.exe /logo:myfav.bmp * * * * Note: A flash update image using these program options should be * * tested carefully before widespread usage. * * * ***************************************************************************** ***************************************************************************** * 4. Flashing Back to an Older Level of BIOS * * * * In order to flash back to an older level of BIOS, the following * * steps should be used to insure the latest flash utility is used. * * * * 1. Obtain the latest level of BIOS update program from the Lenovo * * web site. * * 2. Copy wflash2.exe, lecrud.sys, lecrud64.sys, afuwin.exe, * * afuwingui.exe, amifldrv32.sys, amifldrv64.sys and Ucoredll.dll * * from the latest bios update program folder to the older level * * bios update program folder. Replace the same files in the older * * level bios update program folder. * * 3. In the application graphical user interface, press button "Open" * * and select the BIOS ROM image "imagexx.rom", where "xx" * * represents the two digit flash level. Then in the page "Setup", * * make sure the option "Main