Page 1 of 10
Setting up your
Printronix Auto ID printer on SOTI Connect
Subject
This document will help you setup your Printronix Auto ID printers on SOTI Connect.
Printer Firmware Requirements
The minimum firmware required is:
FILE,PRGM,PTX,T800,CMB-MGL V1.20D P301002
FILE,PRGM,PTX,T4000,CMB-MGL V1.19C P301004
FILE,PRGM,PTX,T6,COMBO V2.20D P301006
FILE,PRGM,PTX,T6e,COMBO V1.13E P301008
FILE,PRGM,PTX,T8,COMBO V2.32E P301018
The minimum PrintNet Enterprise software required is:
PrintNet Enterprise (PNE) V5.05C P301010
SOTI Connect Information Needed
Before you start, you will need the follow information from SOTI Support:
• MQTT Server IP address
• MQTT Tenant ID
• Token
• Tenant ID
• Certificate file (as needed)
Check the Printer Network Connection
The printer needs to be connected to network to start. Verify the connectivity by either:
• Pinging printer’s IP address, or
• Bringing up printer’s webpage
Setup Methods
You can setup your printers in one of three ways
• Webpage easy to do but each printer is setup one at a time
• PrintNet Enterprise (PNE) – convenient for large printer deployments
• Script – best method when raw socket printing, LPR, or FTP is preferred