3
Introduction
e Slide Feeder is an optional accessory for Flextight 949 and X5 Scanners. It enables you
to use your scanner to load individual slides and to batch scan up to 50 slides at a time.
It features a removable magazine, which enables operators to scan one magazine while a
second magazine is being loaded.
While in use, the Slide Feeder loads slides one at a time from the magazine and into the
scanner, where light is shown through the slide and the image is scanned to your computer.
e mechanism itself is similar to those typically used in slide projectors that have linear
magazines. is process is repeated until all selected slides have been scanned.
is manual provides important information about using the Slide Feeder for your Flextight
949 and X5 Scanner.
Important Warnings and Restrictions
• Read all of the included documentation before attempting to install and use the Slide
Feeder.
• Never mount or unmount the Slide Feeder when the scanner is switched on.
• Always use the standard, soware-guided procedure when mounting or unmounting
the Slide Feeder from your scanner. See “Mounting and Unmounting the Slide Feeder”
on page 5 for details.
• Keep the original box in which the Slide Feeder was delivered to you. is box is made of
sturdy cardboard and includes a foam lining custom cut to hold the Slide Feeder safely
and securely. Always store the Slide Feeder in this box when you are not using it. If you
must return the Feeder to Hasselblad for service, you must use this box for shipping or
the shipment will be refused. See “Preparing the Slide Feeder for Storage and Transport”
on page 16 for instructions.
• Install the scanner and Slide Feeder in a location where they are not accessible by children.
e units contain small openings and moving parts that can cause injury.
• Do not touch the Slide Feeder while the magazine is moving.
• Do not touch the originals or the original holder during scanning.
• When you switch on the scanner with the Slide Feeder attached, the unit move the
Feeder into its “home” position if it is not already there. Do not touch the Slide Feeder
while the magazine is moving.
• When using the Slide Feeder, a huge amount of data is oen generated. Be sure to allocate
ample hard disk space for scanned images.
• Before servicing the scanner and/or Slide Feeder, remove the power supply from the
mains (unplug the scanner). It is not sucient simply to press the on/o button on the
scanner.
System Requirements
For Macintosh Users
• Flextight 949 and X5 Scanner
• A computer running Mac OS 10.2.1 or later
• FlexColor 4.0.2 or later for Mac OS
For Windows Users
• Flextight 949 and X5 Scanner
• A computer running Windows 2000 or XP
• FlexColor 4.0.2 or later for Windows
评论0
最新资源