NERO_虚拟光驱10 破解版

[SectorVerify] 10=Sectors from %d to %d on disc are different to source 11=Sector %d on disc has different content to source 20=Read errors from sector %d to %d 21=Read error at sector %d 30=Audio data readable but not comparable 100=Audio-verify runs with read/write-offset of %d samples [APM] 0=No Error 1=Nero - Burnprocess 2=Nero is currently accesssing a disc. [PLUGAUDIOITEM] 0=No Error -1=File cannot be read -2=Read error in audio file -3=Write error in audio file -4=File cannot be closed -5=Out of memory -6=Internal error -7=Internal illegal parameter [CDADOC] 0=No error -2=DRM checking failed. Not enough burn licenses available. [VERIFYERR] 0=No error 1=Files are different 2=CD File is missing 3=Hard drive file is missing 4=Disc file is inaccessible 5=Hard drive file is inaccessible 6=Read error on CD file 7=Read error on hard drive file 8=Directory missing on CD 9=Directory missing on hard drive 10=Cannot mount the written CD 11=Drive letter of the recorder is unknown! 12=Unknown verify error 13=Status summary 14=Out of memory 15=I/O error while reading the file system structure 16=Error caused by corrupt filesystem structure 17=Error caused by supplying wrong parameters to the fs 18=Too many locks of the filesystem buffers 19=Cannot find the corresponding file system on the destination disc 20=Read error on hard drive sector 21=Backup file content differs from the hard drive data 22=Backup file contains incorrect hard drive information [ANTIVIRSCAN] 0=No Error 1=File is probably infected by a virus 2=File could not be cured 3=File was cured successfully 4=An unknown error occurred during the virus scan 5=Out of memory error during the virus scan 6=A read error occurred during the virus scan 7=File might be infected by an unknown virus 8=The infected file has been removed from the compilation [WAVEAUDIOITEM] -1=Out of memory -2=Cannot open wave file! -3=Unexpected file format! -4=Read error in wave file! -5=Only PCM wave files are supported! -6=Unsupported wave sample format! -7=Internal error: Init is missing! -8=Internal error! [AVIVCDFILEITEM] -100=Video MPEG encoder not available -101=Invalid Video MPEG encoder DLL -102=This version of the Video MPEG encoder DLL is not compatible -103=Cannot create a temporary file name -104=MPEG2 plug-in not installed -105=Unknown error in the Video MPEG encoder 1=Not enough memory 2=Not enough encoding parameters given to the encoder 3=Unable to open the file 4=Encoding interrupted by the user 5=Cannot start video encoder 6=The parameters were not accepted by the encoder 7=Invalid video format 8=Error creating video format 9=Cannot open output file 10=Error during encoding 11=Decoder not ready 12=Cannot get bitmap 13=Disk full 14=Error retrieving information 15=The encoder cannot produce this output format 16=Unsupported file format [DVDREALLOC] -1=Unspecified internal error -2=Buffer too small to hold all the information -3=Failed to create a unique temporary file name -4=Not enough memory to complete current action -5=Violation against DVD specification detected -6=Invalid parameter -7=Too many video title sets -8=A file item requires a pathname -10=File access denied -11=Invalid file handle -12=Share violation -13=Too many open files -14=File '%s' not found -15=Disk full -16=Hardware I/O error -17=Generic/unknown I/O error -18=Seek beyond the file -19=File size is not a multiple of a logical block size (2 KB) -20=File is not a DVD file format -21=Required file '%s' is not present -22=File '%s' is not referenced and should not be present -23=Video title set containing '%s' is not required -24=One or more files (mostly VOB file(s)) do not belong to the corresponding IFO file 1=Cannot load library 2=Invalid library 3=Cannot read compilation 4=VIDEO_TS directory not found 5=Backup file '%s' should be identical to '%s' [HDSCSIPFILE] -1=Read error on SCSI device! -2=Out of memory! -3=Seek error on SCSI device! -4=Illegal call (internal error)! [HFSIMAGEITEM] -1=Read error on SCSI device! -2=Out of memory! -3=Illegal call (internal error)! [ISODOC] -1=Error writing multisession info file! -2=Error inserting multisession info file into compilation! -3=Error recreating multisession CD stamp! -4=Fatal error while trying to read HFS data from SCSI hard drive! -5=Fatal error while trying to read boot image data! No disc in the drive? -6=Error while creating ISO or Joliet file names! [W95PARTREADFILE] -1=Illegal logical drive specified! -2=Cannot access vwin32.dll! -3=Drive locking failed! -4=Seek within logical drive failed! -5=Open/Close mismatch! -6=Read error! -7=Cannot get drive information! -8=Cannot write on a logical device! [TRANSFER] 1=Aborted by user 2=Error opening file 3=Error closing file 4=Error reading file 5=Error reading cache file 6=File error -1=General Error -2=Error: function not implemented -3=Error: no user interface -4=Error: phase error -5=Error: not enough memory -6=Error writing file -7=Error opening cache file -8=Error writing cache file -9=Error: no driver -10=Wrong Version -11=Error accessing cache file -12=Capability cannot be changed -13=Error reading cache file -14=Error writing cache file -15=Cache file too small - not all files could be cached -16=Could not perform StartTrack -17=Could not perform ReadBuffer -18=Could not perform EndTrack -19=Could not perform Fixation -20=Could not perform Write -21=Error reading Audio -22=Cannot cache with Audio CD -23=Currently, ISO images may only be written on empty CDs! -24=Could not perform end of Disc-at-once -25=Error reading data -26=Recorder does not support Disc-at-once -27=Could not perform start of Disc-at-once -28=Could not generate CD TEXT information -30=Cannot write track at correct position with this recorder -31=Cannot write compilation in Disc-at-once with this recorder -32=Cannot write compilation in Track-at-once with this recorder -33=Error building internal Disc-at-once structures -34=Cannot write compilation to selected recorders simultaneously -35=Invalid track info -36=Could not perform StartDisk -37=Could not perform StartSession -38=Could not perform start of Track-at-once -39=Could not perform EndSession -40=Could not perform EndDisk [IMAGECOMP] -1=Not enough memory -2=Read error in image file -3=Image file has illegal format -4=Illegal function/method call -5=Error building internal Disc-at-once structures -6=Unknown internal error -7=Error building internal Track-at-once structures [CDR] -1 =Unspecified Recorder Error -2 =Bad DLL version -3 =Recorder function not implemented -4 =Recorder function not supported -14 =Capability read only -15 =Capability unknown -20 =Queuing failed -21 =Wait queue failed -22 =Abort queue failed -23 =Out of memory -25 =Queue again later -26 =SCSI/ATAPI command timeout error -31 =Buffer too large -100 =Parameter error -101 =Invalid track info -102 =Invalid fixinfo -103 =Invalid track mode -104 =Invalid pause length -200 =Internal state error -201 =Invalid write state -300 =Unspecified host adapter error -400 =Unspecified target error -500 =SCSI command aborted -599 =Undefined SCSI error -600 =Device not available -601 =Specified host adapter invalid -999 =No SCSI/IDE command -1000=SCSI/IDE error -1001=Absorption control error -1002=Application code conflict -1003=ATIP time miscompare -1004=Attempt to cross track boundary -1005=Audio play aborted -1006=Audio play stopped due to error -1007=Barcode reading error -1008=Block size conflict -1009=Block size format conflict -1010=Buffer data size error -1011=Buffer error during recording -1012=Buffer overflow -1013=Buffer underrun error. Data stream broken. -1014=Calibration area almost full -1015=Calibration area full -1016=Cannot read ATIP -1017=Cannot