#include "lcd.h"
#include "fonts.h"
//#include "systick.h"
static vu16 TextColor = 0x0000, BackColor = 0xFFFF;
vu16 dummy;
/*******************************************************************************
* Function Name : Delay_LCD
* Description : Inserts a delay time.
* Input : nCount: specifies the delay time length.
* Output : None
* Return : None
*******************************************************************************/
void Delay_LCD(u16 n)
{
u16 i,j;
for (i = 0;i<n;++i)
for(j=0;j<3000;++j);
}
/*
uC8230型液晶控制器寄存器配置
*/
void REG_8230_Init(void)
{
LCD_WriteReg(0x0000,0x0001);
Delay_LCD(1000);
LCD_WriteReg(0x0001,0x0000);
LCD_WriteReg(0x0010,0x1790);
LCD_WriteReg(0x0060,0x2700);
LCD_WriteReg(0x0061,0x0001);
LCD_WriteReg(0x0046,0x0002);
LCD_WriteReg(0x0013,0x8010);
LCD_WriteReg(0x0012,0x80fe);
LCD_WriteReg(0x0002,0x0500);
LCD_WriteReg(0x0003,0x1030);
LCD_WriteReg(0x0030,0x0303);
LCD_WriteReg(0x0031,0x0303);
LCD_WriteReg(0x0032,0x0303);
LCD_WriteReg(0x0033,0x0300);
LCD_WriteReg(0x0034,0x0003);
LCD_WriteReg(0x0035,0x0303);
LCD_WriteReg(0x0036,0x0014);
LCD_WriteReg(0x0037,0x0303);
LCD_WriteReg(0x0038,0x0303);
LCD_WriteReg(0x0039,0x0303);
LCD_WriteReg(0x003a,0x0300);
LCD_WriteReg(0x003b,0x0003);
LCD_WriteReg(0x003c,0x0303);
LCD_WriteReg(0x003d,0x1400);
LCD_WriteReg(0x0092,0x0200);
LCD_WriteReg(0x0093,0x0303);
LCD_WriteReg(0x0090,0x080d);
LCD_WriteReg(0x0003,0x1018);
LCD_WriteReg(0x0007,0x0173);
}
void REG_932X_Init(void)
{
LCD_WriteReg(R227, 0x3008); // Set internal timing
LCD_WriteReg(R231, 0x0012); // Set internal timing
LCD_WriteReg(R239, 0x1231); // Set internal timing
LCD_WriteReg(R1 , 0x0000); // set SS and SM bit //0x0100
LCD_WriteReg(R2 , 0x0700); // set 1 line inversion
LCD_WriteReg(R3 , 0x1030); // set GRAM write direction and BGR=1.
LCD_WriteReg(R4 , 0x0000); // Resize register
LCD_WriteReg(R8 , 0x0207); // set the back porch and front porch
LCD_WriteReg(R9 , 0x0000); // set non-display area refresh cycle ISC[3:0]
LCD_WriteReg(R10 , 0x0000); // FMARK function
LCD_WriteReg(R12 , 0x0000); // RGB interface setting
LCD_WriteReg(R13 , 0x0000); // Frame marker Position
LCD_WriteReg(R15 , 0x0000); // RGB interface polarity
/**************Power On sequence ****************/
LCD_WriteReg(R16 , 0x0000); // SAP, BT[3:0], AP, DSTB, SLP, STB
LCD_WriteReg(R17 , 0x0007); // DC1[2:0], DC0[2:0], VC[2:0]
LCD_WriteReg(R18 , 0x0000); // VREG1OUT voltage
LCD_WriteReg(R19 , 0x0000); // VDV[4:0] for VCOM amplitude
// Delay_Ms(200); // Delay 200 MS , Dis-charge capacitor power voltage
HAL_Delay(200);
LCD_WriteReg(R16 , 0x1690); // SAP, BT[3:0], AP, DSTB, SLP, STB
LCD_WriteReg(R17 , 0x0227); // R11H=0x0221 at VCI=3.3V, DC1[2:0], DC0[2:0], VC[2:0]
// Delay_Ms(50); // Delay 50ms
HAL_Delay(50);
LCD_WriteReg(R18 , 0x001D); // External reference voltage= Vci;
// Delay_Ms(50); // Delay 50ms
HAL_Delay(50);
LCD_WriteReg(R19 , 0x0800); // R13H=1D00 when R12H=009D;VDV[4:0] for VCOM amplitude
LCD_WriteReg(R41 , 0x0014); // R29H=0013 when R12H=009D;VCM[5:0] for VCOMH
LCD_WriteReg(R43 , 0x000B); // Frame Rate = 96Hz
// Delay_Ms(50); // Delay 50ms
HAL_Delay(50);
LCD_WriteReg(R32 , 0x0000); // GRAM horizontal Address
LCD_WriteReg(R33 , 0x0000); // GRAM Vertical Address
/* ----------- Adjust the Gamma Curve ---------- */
LCD_WriteReg(R48 , 0x0007);
LCD_WriteReg(R49 , 0x0707);
LCD_WriteReg(R50 , 0x0006);
LCD_WriteReg(R53 , 0x0704);
LCD_WriteReg(R54 , 0x1F04);
LCD_WriteReg(R55 , 0x0004);
LCD_WriteReg(R56 , 0x0000);
LCD_WriteReg(R57 , 0x0706);
LCD_WriteReg(R60 , 0x0701);
LCD_WriteReg(R61 , 0x000F);
/* ------------------ Set GRAM area --------------- */
LCD_WriteReg(R80 , 0x0000); // Horizontal GRAM Start Address
LCD_WriteReg(R81 , 0x00EF); // Horizontal GRAM End Address
LCD_WriteReg(R82 , 0x0000); // Vertical GRAM Start Address
LCD_WriteReg(R83 , 0x013F); // Vertical GRAM Start Address
LCD_WriteReg(R96 , 0x2700); // Gate Scan Line 0xA700
LCD_WriteReg(R97 , 0x0001); // NDL,VLE, REV
LCD_WriteReg(R106, 0x0000); // set scrolling line
/* -------------- Partial Display Control --------- */
LCD_WriteReg(R128, 0x0000);
LCD_WriteReg(R129, 0x0000);
LCD_WriteReg(R130, 0x0000);
LCD_WriteReg(R131, 0x0000);
LCD_WriteReg(R132, 0x0000);
LCD_WriteReg(R133, 0x0000);
/* -------------- Panel Control ------------------- */
LCD_WriteReg(R144, 0x0010);
LCD_WriteReg(R146, 0x0000);
LCD_WriteReg(R147, 0x0003);
LCD_WriteReg(R149, 0x0110);
LCD_WriteReg(R151, 0x0000);
LCD_WriteReg(R152, 0x0000);
/* Set GRAM write direction and BGR = 1 */
/* I/D=01 (Horizontal : increment, Vertical : decrement) */
/* AM=1 (address is updated in vertical writing direction) */
LCD_WriteReg(R3 , 0x01018); //0x1018
LCD_WriteReg(R7 , 0x0173); // 262K color and display ON
}
/*******************************************************************************
* Function Name : STM3210B_LCD_Init
* Description : Initializes the LCD.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void LCD_Init(void)
{
LCD_CtrlLinesConfig();
dummy = LCD_ReadReg(0);
if(dummy == 0x8230){
REG_8230_Init();
}
else{
REG_932X_Init();
}
dummy = LCD_ReadReg(0);
}
/*******************************************************************************
* Function Name : LCD_SetTextColor
* Description : Sets the Text color.
* Input : - Color: specifies the Text color code RGB(5-6-5).
* Output : - TextColor: Text color global variable used by LCD_DrawChar
* and LCD_DrawPicture functions.
* Return : None
*******************************************************************************/
void LCD_SetTextColor(vu16 Color)
{
TextColor = Color;
}
/*******************************************************************************
* Function Name : LCD_SetBackColor
* Description : Sets the Background color.
* Input : - Color: specifies the Background color code RGB(5-6-5).
* Output : - BackColor: Background color global variable used by
* LCD_DrawChar and LCD_DrawPicture functions.
* Return : None
*******************************************************************************/
void LCD_SetBackColor(vu16 Color)
{
BackColor = Color;
}
/*******************************************************************************
* Function Name : LCD_ClearLine
* Description : Clears the selected line.
* Input : - Line: the Line to be cleared.
* This parameter can be one of the following values:
* - Linex: where x can be 0..9
* Output : None
* Return : None
*******************************************************************************/
void LCD_ClearLine(u8 Line)
{
LCD_DisplayStringLine(Line, " ");
}
/*******************************************************************************
* Function Name : LCD_Clear
* Description : Clears the hole LCD.
* Input : Color: the color of the background.
* Output : None
* Return : None
*******************************************************************************/
void LCD_Clear(u16 Color)
{
u32 index = 0;
LCD_SetCursor(0x00, 0x0000);
LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
for(index = 0; index < 76800; index++)
{
LCD_WriteRAM(Color);
}
}
/*******************************************************************************
* Function Name : LCD_SetCursor
* Description : Sets the cursor position.
* Input : - Xpos: specifies the X position.
*
