SINAMICS
SINAMICS V-ASSISTANT
Copyright © Siemens AG 2013.
All rights reserved
Contents
Installation instructions
1 Operating system and hardware requirements
2 Working environment
3 Installation
4 Correction
Installation instructions
1 Operating system and hardware requirements
Windows 7 64-bit (Home Premium)
Windows 7 64-bit (Professional)
Windows 7 64-bit (Ultimate)
Windows 10 (Home)
Windows 10 (Pro)
Windows 10 (Enterprise)
· A personal computer (PC) which can run one of the above operating systems (for more information, refer to Microsoft guidelines).
· At least 350 MB free disk memory.
· Small font size required; minimum screen resolution must be 1024x768 pixels.
· A mouse supported by Microsoft Windows.
· To connect SINAMICS V-ASSISTANT for communication, the following devices are required:
- a USB cable (To ensure the stability of online commissioning, Siemens recommends you to use a shielded USB cable of less than 3 m with magnetic rings on both ends.);
- a SINAMICS V90 drive.
2 Working environment
To install and use SINAMICS V-ASSISTANT under Windows 7/Windows 10, you must have logged in with the Administrator privilege.
Sleep mode is not allowed when using SINAMICS V-ASSISTANT. During online working mode or when SINAMICS V-ASSISTANT is accessing the project via Internet, PC in sleep mode may cause the following errors:
· Accidental termination of online connection
· Loss of project data in use
To avoid the above errors, please set the power-saving option to be triggered manually, so that the sleep mode cannot be triggered by the timer automatically. As stated above, while running the communication task, never trigger the sleep mode even manually.
SINAMICS V-ASSISTANT has passed the tests on the following operating systems:
· Windows 7 (64-bit)
· Windows 10
3 Installation
· Close all the applications including MS-Office tool bar.
· Start the installation program by double-clicking the Setup.exe file in the installation package.
· Finish the installation according to the instructions on the screen.
Notice:
If you need to install SINAMICS V-ASSISTANT on Windows 7/Windows 10, you must log in with administrator access.
4 Correction
Despite that we have tried our best to guarantee the correctness of the product files, we still find the following imperfection:
You can only run one SINAMICS V-ASSISTANT instance each time.
SINAMICS
SINAMICS V-ASSISTANT
西门子工业公司版权所有 © 2013
目录
安装注意事项
1 操作系统和硬件要求
2 工作环境
3 安装
4 更正
安装注意事项
1 操作系统和硬件要求
Windows 7 64 位（家庭高级版）
Windows 7 64 位（专业版）
Windows 7 64 位（旗舰版）
Windows 10（家庭版）
Windows 10（专业版）
Windows 10（企业版）
· 能够运行以上操作系统之一的个人电脑（PC）（详见 Microsoft 规范）。
· 至少 350 MB 未使用的硬盘空间。
· 使用小字体设置，并且屏幕的最低分辨率为 1024x768 像素。
· Microsoft Windows 支持的任何鼠标。
· 为了与 SINAMICS V-ASSISTANT 连接通信，您将需要以下设备：
- USB 电缆（为了确保在线调试的稳定性，建议使用<3米，两端带磁环以及带屏蔽的USB电缆）；
- SINAMICS V90 驱动
2 工作环境
为了能够在 Windows 7/Windows 10下安装和使用 SINAMICS V-ASSISTANT 软件，必须已使用管理员权限登录。
在使用 SINAMICS V-ASSISTANT 时，建议禁止休眠模式。当在线连接处于打开状态或 SINAMICS V-ASSISTANT 经由网络访问项目时，电脑进入休眠模式可能导致以下错误：
· 在线连接的意外终止
· 正在工作中的项目数据丢失
为了避免这些错误，请在 Windows 控制面板中将操作系统的节能选项设置为手动触发，这样可以确保休眠不自动被定时器触发。如上所述，在运行通信任务时，请勿手动触发休眠模式。
SINAMICS V-ASSISTANT 已通过以下操作系统版本测试：
· Windows 7 (64 位)
· Windows 10
3 安装
· 关闭包括 MS-Office 工具栏在内的所有应用程序。
· 通过双击安装包中的 Setup.exe 文件启动安装程序。
· 按照屏幕上显示的指令完成安装。
注意：
如要在 Windows 7/Windows 10 操作系统上安装 SINAMICS V-ASSISTANT，您必须使用管理员权限登录。
4 更正
尽管我们极尽努力确保产品相关文件的准确性，我们仍然发现如下不完全之处：
您每次只能运行一个 SINAMICS V-ASSISTANT 的实例。
