/**
******************************************************************************
* @file stm32f4xx_hal_tim.c
* @author MCD Application Team
* @brief TIM HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Timer (TIM) peripheral:
* + Time Base Initialization
* + Time Base Start
* + Time Base Start Interruption
* + Time Base Start DMA
* + Time Output Compare/PWM Initialization
* + Time Output Compare/PWM Channel Configuration
* + Time Output Compare/PWM Start
* + Time Output Compare/PWM Start Interruption
* + Time Output Compare/PWM Start DMA
* + Time Input Capture Initialization
* + Time Input Capture Channel Configuration
* + Time Input Capture Start
* + Time Input Capture Start Interruption
* + Time Input Capture Start DMA
* + Time One Pulse Initialization
* + Time One Pulse Channel Configuration
* + Time One Pulse Start
* + Time Encoder Interface Initialization
* + Time Encoder Interface Start
* + Time Encoder Interface Start Interruption
* + Time Encoder Interface Start DMA
* + Commutation Event configuration with Interruption and DMA
* + Time OCRef clear configuration
* + Time External Clock configuration
@verbatim
==============================================================================
##### TIMER Generic features #####
==============================================================================
[..] The Timer features include:
(#) 16-bit up, down, up/down auto-reload counter.
(#) 16-bit programmable prescaler allowing dividing (also on the fly) the
counter clock frequency either by any factor between 1 and 65536.
(#) Up to 4 independent channels for:
(++) Input Capture
(++) Output Compare
(++) PWM generation (Edge and Center-aligned Mode)
(++) One-pulse mode output
##### How to use this driver #####
==============================================================================
[..]
(#) Initialize the TIM low level resources by implementing the following functions
depending from feature used :
(++) Time Base : HAL_TIM_Base_MspInit()
(++) Input Capture : HAL_TIM_IC_MspInit()
(++) Output Compare : HAL_TIM_OC_MspInit()
(++) PWM generation : HAL_TIM_PWM_MspInit()
(++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
(++) Encoder mode output : HAL_TIM_Encoder_MspInit()
(#) Initialize the TIM low level resources :
(##) Enable the TIM interface clock using __TIMx_CLK_ENABLE();
(##) TIM pins configuration
(+++) Enable the clock for the TIM GPIOs using the following function:
__GPIOx_CLK_ENABLE();
(+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
(#) The external Clock can be configured, if needed (the default clock is the
internal clock from the APBx), using the following function:
HAL_TIM_ConfigClockSource, the clock configuration should be done before
any start function.
(#) Configure the TIM in the desired functioning mode using one of the
initialization function of this driver:
(++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
(++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
Output Compare signal.
(++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
PWM signal.
(++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
external signal.
(++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
in One Pulse Mode.
(++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
(#) Activate the TIM peripheral using one of the start functions depending from the feature used:
(++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
(++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
(++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
(++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
(++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
(++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
(#) The DMA Burst is managed with the two following functions:
HAL_TIM_DMABurst_WriteStart()
HAL_TIM_DMABurst_ReadStart()
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup TIM TIM
* @brief TIM HAL module driver
* @{
*/
#ifdef HAL_TIM_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @addtogroup TIM_Private_Functions
* @{
*/
/* Private function prototypes -----------------------------------------------*/
static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
收起资源包目录
基于stm32f429以太网口,实现tftp在线升级,服务端使用tftpd64测试可用 (446个子文件)
HAL_LWIP_TFTP_TEST.uvguix.28949 179KB
HAL_LWIP_TFTP_TEST.uvguix.Administrator 189KB
keilkilll.bat 399B
stm32f4xx_hal_tim.c 176KB
stm32f4xx_hal_rcc_ex.c 154KB
sockets.c 139KB
httpd.c 92KB
tcp.c 87KB
stm32f4xx_hal_uart.c 86KB
nd6.c 85KB
tcp_in.c 84KB
mdns.c 77KB
tcp_out.c 77KB
snmp_msg.c 77KB
lcp.c 74KB
dhcp.c 74KB
stm32f4xx_hal_eth.c 74KB
api_msg.c 69KB
stm32f4xx_hal_tim_ex.c 67KB
auth.c 66KB
ipcp.c 64KB
eap.c 63KB
ip6.c 55KB
dns.c 54KB
netif.c 53KB
stm32f4xx_hal_flash_ex.c 52KB
pbuf.c 50KB
mqtt.c 49KB
smtp.c 49KB
ccp.c 49KB
ppp.c 49KB
etharp.c 47KB
api_lib.c 44KB
udp.c 44KB
snmp_core.c 42KB
ipv6cp.c 42KB
stm32f4xx_hal_rcc.c 42KB
makefsdata.c 41KB
ip4.c 41KB
stm32f4xx_hal_dma.c 41KB
pppol2tp.c 40KB
pppoe.c 38KB
altcp_tls_mbedtls.c 38KB
mem.c 35KB
lwiperf.c 34KB
lowpan6_common.c 34KB
chap_ms.c 33KB
ip6_frag.c 31KB
ip4_frag.c 30KB
pppos.c 30KB
lowpan6.c 29KB
http_client.c 29KB
snmp_mib2_ip.c 28KB
dhcp6.c 28KB
igmp.c 28KB
system_stm32f4xx.c 28KB
sntp.c 27KB
stm32f4xx_hal_flash.c 25KB
stm32f4xx_hal_pwr_ex.c 25KB
snmp_mib2_tcp.c 23KB
ethernetif.c 23KB
utils.c 21KB
stm32f4xx_hal_pwr.c 21KB
raw.c 21KB
fsm.c 20KB
stm32f4xx_hal_gpio.c 20KB
fsdata.c 20KB
stm32f4xx_hal_cortex.c 20KB
vj.c 20KB
stm32f4xx_hal.c 20KB
tcpip.c 20KB
inet_chksum.c 20KB
snmp_asn1.c 20KB
bridgeif.c 19KB
chap-new.c 19KB
mld6.c 19KB
netbiosns.c 18KB
acd.c 18KB
upap.c 18KB
altcp_proxyconnect.c 17KB
des.c 16KB
altcp.c 16KB
slipif.c 16KB
init.c 16KB
tftp.c 15KB
snmp_snmpv2_usm.c 15KB
icmp.c 15KB
icmp6.c 14KB
multilink.c 14KB
lowpan6_ble.c 14KB
snmp_traps.c 14KB
pppapi.c 14KB
altcp_tcp.c 14KB
snmp_mib2_interfaces.c 14KB
tcp_echoserver.c 13KB
snmp_mib2_udp.c 13KB
netdb.c 13KB
demand.c 13KB
snmp_mib2_system.c 13KB
timeouts.c 13KB
共 446 条
- 1
- 2
- 3
- 4
- 5
资源评论
- weixin_470820602023-11-09下载后编译,有54个错误。。。
m0_37896821
- 粉丝: 0
- 资源: 1
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功