28335modbus.zip

Here is a list of all modules:

This module defines the interface for the application. It contains the basic functions and types

required to use the Modbus protocol stack. A typical application will want to call eMBInit() first. If the

device is ready to answer network requests it must then call eMBEnable() to activate the protocol

stack. In the main loop the function eMBPoll() must be called periodically. The time interval between

pooling depends on the configured Modbus timeout. If an RTOS is available a separate task should

be created and the task should always call the function eMBPoll().

Define Documentation