realtek_RTL8111G千兆网卡驱动for dos

;************************************************************************ ;* ;* Chapter 1. How to use this patch file? ;* ;* This file (RTGND2.TXT) contains info. that helps you patch ;* 'RTGND.DOS' file into your own NDIS2 driver. ;* ;* To generate your custom driver, please follow the steps ;* described below: ;* ;* a). Follow the instructions to edit the message area in each ;* line. Save this file when you finish editing. ;* ( see CHAPTER 2 for more details ! ) ;* ;* !!! NOTE: DO NOT EDIT THE OFFSET AND LENGTH AREA !!! ;* ;* b). Make sure that you have the following files in your working ;* directory: ;* ;* RTPATCH.EXE -------> The patch execution file ;* RTGND.DOS -------> RTL8168B NDIS2 driver file ;* RTGND2.TXT -------> RTGND.DOS patch info. file ;* ;* c). After you decide the name for your NDIS2 driver, ;* simply type: ;* ;* > rtpatch RTGND.DOS RTGND2.txt <put driver name here> <? ;* ;* !!! NOTE: DO NOT USE THE SAME DRIVER NAME AS THE ORIGINAL ;* DRIVER!!! ;* ;* d). If no error occurs, you should find your custom driver is ;* generated under your working directory. ;* ;* ;* Chapter 2. How to edit this file ? ;* ;* ;* Each line in this file contains a display message info. of the ;* driver. Each line has the same format: ;* ;* <offset> <length> <message> ;* e.g. ;* 1266 28 'NDIS2 driver for RTL8168',0dh,0ah,'$'; ;* ---- -- ---------------------------------------- ;*      ;* Do not edit here! | | EOL ;*   Put your own message here! | ;* (HEX) (DEC) delimiter ;* ;* ;* ;* *NOTE: DO NOT EDIT THE <offset> AND <length> AREA !!! ;* ;* *NOTE: Anything after comment character ';' will be ignored! ;* ;* *NOTE: Always add ';'(EOL) at end of each line! ;* ;* *NOTE: If delimiter is needed, keep delimiter intact! In this case, ;* leave the '$' as the last byte. ;* ;* *NOTE: 0H can only be added as delimiter! Message after 0H will be lost! ;* ;* *NOTE: Total length of your message should not exceed <length>. ;* ;* *NOTE: If you must use the comment character (;) in your message, ;* put 3bh instead of ';'. Same for ('). ;* ;* *NOTE: Do not exceed 250 characters in each line. ;* ;************************************************************************ ;************************************************************************ ; Put your driver name here (delimiter is '$') ;************************************************************************ 20a 8 'RTGND','$',0; maximum ----> 6 + '$'+ 0 ;driver name for PCI-E NIC, ie RTL8168B 929d 8 'RTGND','$',0; maximum ----> 6 + '$'+ 0 ;driver name for PCI-E NIC, ie RTL8168B ;************************************************************************ ; Put your adapter name instead of 'RTL8168B' (no delimiter) ;************************************************************************ 8f47 80 'Realtek RTL8168/8111 Family Gigabit Ethernet Adapter',0 ;RTL8168B 909f 80 'CopyRight : Copyright @ 2006, Realtek Semiconductor Corp.',0 ;877a 2 ECh,10h; ;VID ;87f5 2 ECh,10h; ;88b7 2 ECh,10h; ;88e5 2 ECh,10h; ;8909 2 ECh,10h; ;90d5 2 ECh,10h; ;8777 2 39h,81h; ;DID ;88b4 2 39h,81h; ;88e2 2 39h,81h; ;8906 2 39h,81h; ;90d2 2 39h,81h;