I
I
G
G
K
K
ACCESS CONTROL
SYSTEM
Software Operation Guide
System Operation Guide
IGK
Page 2
1. System Installation
1.1. Product Installation (See Product User Manual).
1.2. Software Installation (See IGK Software Installation Manual).
After software is installed successfully, it automatically places an icon
on your desktop; double click on this icon to start “Access Control
Software”.
System Operation Guide
IGK
Page 3
2. System Configurations
2.1. Login
After accessing to the main interface page of “access control software”,
click “system/login”, show as below:
Input your user name and password. The software exits automatically after
3 invalid attempts.
Note: the system default user name is Admin and password is 123. (User
name and password are case-sensitive).
System Operation Guide
IGK
Page 4
2.2. Add Device
2.2.1. Click “Device Management/Controller”, show as below
2.2.2. Click “Add Controller” , show as below:
System Operation Guide
IGK
Page 5
2.2.2.1. Input new controller name
2.2.2.2. Input controller’s serial number (the serial number is unique to
each controller and is set by the manufacturer)
2.2.2.3. Choose communication link type:
2.2.2.3.1. Local (485), make sure the correct “Com Port” is
selected.
2.2.2.3.2. Remote (Ethernet), enter the IP address in the “IP
address” box and the corresponding “network port” (the default
network port is “20000”).
2.2.2.3.3. Remote (MODEM), enter the telephone number in the
“telephone” box and choose the corresponding “Com Port” for
the “modem”.