没有合适的资源?快使用搜索试试~ 我知道了~
cluster32详细配置需求,值得学习
需积分: 0 3 下载量 12 浏览量
2009-07-24
10:28:40
上传
评论
收藏 415KB PDF 举报
温馨提示
试读
40页
cluster32详细配置需求,从SUN工程师那边高过来的!
资源详情
资源评论
资源推荐
Installation Checklist for SunCluster 3.2 Systems
Customer:
Sun Order Number:
CASE Number:
Technician:
Version EIS-DVD:
Date:
• It is assumed that the installation is carried out with the help of the current EIS-DVD.
• The idea behind this checklist is to help the installer achieve a "good" installation.
• It is assumed that the installer has attended the appropriate training classes.
• It is not intended that this checklist be handed over to the customer.
• This installation checklist for SunCluster is to be used together with the installation
checklist(s) for Sun Fire Server, workgroup server, storage etc..
• This checklist is for Sun Cluster 3.2 (SPARC & x86) in combination with Solaris 9
8/05 Update8 (SPARC only) or Solaris 10 11/06 Update3 (or higher). For supported
configurations please refer to the official configuration guide for Sun Cluster.
• If this cluster is to be installed as part of a Geo-Cluster, refer also to the EIS
installation checklist for Sun Cluster Geographic Edition 3.2.
• The installation must have been prepared using WINGS (Workflow Information
Gathering System).
Serial# hostid hostname
Admin Workstation
Node1
Node2
Node3
Node4
Node5
Node6
Node7
Node8
Sun Internal and Approved Partners Only Page 1 of 40 Vn 1.5a Created: 25. Jan. 2008
Task Comment Check
PREPARATION
Site-Audit complete?
WINGS/GETS "Site Audit" document.
Installation Specification complete?
WINGS Server documents.
Ensure that the Configuration Guide for
Sun Cluster was consulted.
http://sundoc.central/SunWINPublicView.j
sp?token=126955
If non-Sun storage is involved ensure that
the information on the Open Storage
Program was consulted.
http://www.sun.com/software/cluster/osp
Statement-of-Installation signed?
WINGS "Statement of Installation".
If name service (DNS, NIS) in use,
ensure that new hostnames, IP addresses
etc. are correct on name server.
MANDATORY: Ensure that the licenses are available for Sun Cluster
Framework & Agents.
Task Comment Check
INSTALLATION OF THE ADMINISTRATION WORKSTATION
Solaris-Ready Installation as for server. Installation according to the appropriate
server/desktop checklist
(Entire Distribution)
Install the SunCluster Console Panel from
the product CD.
pkgadd -d . SUNWccon
Optional: SUNWscman
If ssh is needed in the Console Panel then install the required Sun Cluster 3.2
core patches on administration workstation with EIS-DVD ≥26JUN07.
Note the structure under .../sun/patch/SunCluster/3.2
Configure PATH: /opt/SUNWcluster/bin
Configure MANPATH:
/usr/cluster/man /opt/SUNWcluster/man
Probably already in file /.profile-EIS
for user root.
Configure in directory /etc the files
clusters, serialports and hosts.
E.g.: for /etc/clusters: clustname host host
E.g.: for /etc/serialports host tc tcport
- for a SSP or SF15K SC:
domain ssp 23
- for a SunFire with access to ssc console:
domain tc tcport
- for a SunFire without access to scc console:
domain ssc domain_port
domain_port = 5001 for domain A; 5002 for
domain B; 5003 for domain C; 5004 for domain D
Detailed explanation in the man page.
Configure the terminal server.
If using Micro Annex please refer to:
http://sunweb.germany/SSS/MCSC/ET/suncluster/clusttips/annexXL.html#Inst
Also available on the EIS-DVD: ...sun/docs/MISC.
Sun Internal and Approved Partners Only Page 2 of 40 Vn 1.5a Created: 25. Jan. 2008
Task Comment Node
1 2 3 4
BASIC CLUSTER CONFIGURATION
Solaris-Ready Installation.
Installation according to the appropriate
server checklist(s). Please note:
• If you install Oracle 10g RAC then its
NOT possible to use capitals within the
hostname. Use lower case letters!
(Oracle Bug 4632899)
• Do not forget the 512Mb (SC3.2
strongly recommended) partition for
/globaldevices
• If using SDS/SVM reserve slice 7 with
32MB (EIS recommendation) for
metaDB/replicas.
• Ensure that the SAN Foundation Suite
packages are installed and patched.
(SAN is necessary for fibre
server/storage or VxVM).
Minimum required
MetaCluster:
• Full Distribution + OEM
Support (SUNWCXall) for
E10000 &
SF15K/12K/E25K/E20K.
• End User System Support
(SUNWCuser) for other
systems
1
.
EIS recommends SUNWCXall
for all installations.
In case of upgrades maybe you
are not able to increase the
metaDB slice size. Choose a
suitable configuration for your
upgrade.
The absolute minimum for
metaDB is 20MB.
Expand numbers of inodes on the
/globaldevices partition, e.g:
# newfs -i 512 /dev/rdsk/c0t0d0s6
Configure /etc/inet/hosts.
Additionally for Solaris10 11/06 Update3
and lower configure /etc/inet/ipnodes.
Note: Since Solaris 10 8/07 Update 4 ipnodes is a
link to the file hosts.
Enter all cluster nodes and all
the logical Hosts. Also logical
hosts of none-global zones.
Define the scsi-initiator-id.
For sparc: in the OBP.
Start probe-scsi-all on both nodes
simultaneously. Completed without error?
For x86: in "LSI Logic Configuration"
utilities menu within the bootup. Also add
scsi-initiator-id=<x> into file
/kernel/drv/mpt.conf due to bug 6222114.
Only necessary for dual hosted
scsi devices!
Infodoc:20704, 83565
The SE3310 SCSI RAID can
isolate the host channels from
each other. No action
required!
Only for Solaris x86 cluster:
Edit /kernel/drv/sd.conf if you have more
than one LUN per target.
1 The Sun Cluster Software Installation Guide for Solaris OS (819-2970) Chapter 1, Section Planning
the OS states: You might need to install other Solaris software packages that are not part of the End
User Solaris Software Group. The Apache HTTP server packages (SUNWapchr & SUNWapchu) are
one example. Third-party software, such as ORACLE®, might also require additional Solaris
software packages. See your third-party documentation for any Solaris software requirements.
TIP: To avoid the need to manually install Solaris software packages, install the Entire Solaris
Software Group Plus OEM Support. See also Infodoc 74119.
Sun Internal and Approved Partners Only Page 3 of 40 Vn 1.5a Created: 25. Jan. 2008
Task Comment Node
1 2 3 4
If you are using Dual Ultra3 SCSI HBA
you must use Method 2 of Infodoc 20704 or
use:
For JBOD:
http://docs.sun.com/app/docs/doc/817-5681/6ml4dh4j1?q=SCSI+JBOD&a=view
SunAlert: 52687
Note: Use 370-5396-02 revision
of the SE3310 JBOD I/O
module or use the out ports of
3310 JBOD.
SRDB 49560.
If you are using Dual Ultra3 SCSI HBA
(X6758 / PN375-3057) set the jumpers
J4,J5, J8 and J9 to 2-3!
SunAlert 52681
When using shared SCSI storage add the
following entries to file /etc/system
set sd:sd_io_time=30
set sd:sd_retry_count=3 (not Solaris10)
set vxdmp:dmp_retry_count=1
set scsi_reset_delay=500
Additional if you use the glm driver to file
/kernel/drv/glm.conf
scsi-selection-timeout=64
Bug 4529645: Cluster hangs for
some minutes if D1000 is
powered off.
Bug 6437172: A failover should
not happen when a scsi cable is
pulled out.
Hardware configuration of PCI-SCI
e.g for one adapter:
connect (node1 IN) to (node2/Switch OUT)
connect (node1 OUT) to (node2/Switch IN)
Software installation with pkgadd:
• SUNWrsm SUNWrsmo SUNWrsmox
SUNWrsmx from SolarisCD.
• SUNWscrif SUNWscrdt SUNWsci SUNWscid
SUNWscidx from ClusterCD.
Within scinstall setup do not accept the
default when you are prompted for the
adapter connection. Instead, provide the
port name (0,1,2,3) found on the Dolphin
switch itself, to which the node is
physically cabled.
Verify that the SCI driver is loaded:
# prtconf | grep pci11
pci11c8,0, instance #0
pci11c8,0, instance #1
Note: The instance number must be in the
same order on all nodes if you like to
connect sci0 to sci0!
Don't forget the RSM Patch
111796 for Sol8!
Maybe you have to configure
file sci.conf in directory
/kernel/drv.
Infodoc 75497 & 74889
Only configure sci switches
when you have installed
switches!
Use the -G option for pkgadd
in case of Solaris10.
Sun Internal and Approved Partners Only Page 4 of 40 Vn 1.5a Created: 25. Jan. 2008
Task Comment Node
1 2 3 4
If you use Infiniband as cluster transport:
• You must use one Infiniband switch for each private connection. If
one HCA is installed each of its two ports must be connected to a
different InfiniBand switch.
• If two HCAs are installed leave the second port unused.
• You cannot directly connect the HCA to each other.
• Jumbo frames are not supported.
• VLANs are not supported on a cluster which uses Infiniband
switches.
• Sun Infiniband switches support up to 8 nodes in a cluster.
When using Sun StorEdge 69x0 the
minimum “Service Processor Image version
2.1.2” is required.
FIN# I0870-1
FIN# I0876-1
When using SE99x0 (HDS) set System
Options mode:
• 185 was only needed for non-leadville HBAs on
SE9910/9960 (can always be on).
• 186 is for VCS only. More details in Infodoc
77683.
Since microcode 21-08-05-00/00 the default
settings (185=on, 186=off, 254=off) should work
for SC3.x. The modes 186 and 254 are only
necessary for Veritas Cluster Server.
Only for 9985/9990 no special mode settings are
required for SC 3.x. All three modes should be
left off! (Mode 185 is not defined. Mode 186 and
254 have been renumbered and changed to host
group option modes).
Solaris10 requires V08 microcode 50-08-05 V07+1
(50-07-72 is NOT sufficient).
Experience on this issue can be found at:
http://sunweb.germany/SSS/MCSC/ET/suncluster/cl
usttips/sc3x_99x0modes.html
FIN: I1130-1
System Option 111 is for lun
security. Must be on for SC
3.x and 9910/9960 only.
The min. required microcode
1-10-00-00/10 .
Host Mode should be set to 09
for Sun Cluster ports (also for
Veritas Cluster). If you use
Veritas Cluster Server and Sun
Cluster on the same storage unit
you should use Host Mode 29
for the Sun Cluster ports (min.
required microcode 21-11-02-
00/00).
Please give feedback if you
have problems with these
modes!
Sun Internal and Approved Partners Only Page 5 of 40 Vn 1.5a Created: 25. Jan. 2008
剩余39页未读,继续阅读
linuxzcb
- 粉丝: 1
- 资源: 9
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
评论0