微控电子烧录器驱动

把mkIIupgrader***.txt重命名为.exe文件，然后运行。 1，支持XP,VISTA,WIN7，如果是XP系统，请先确认是否有安装.netframework，如果没有安装，程序会出错。.netframework可以到微软网站或者google搜索下载，版本无所谓，建议安装3.0； 2，在WIN7下，请点击右键，选择以管理员身份运行； 3，需要AVRSTUDIO的支持，请先安装； 4，Standalone IO test firmware用于测试仿真器接口芯片是否损坏，在写入该固件后，请对仿真器引出的JTAG头子上的VCC和GND供电，可以直接从目标板取，然后用万用表观察TDI,TDO,TCK,TMS,RST引脚的电平变化，如果有电平变化说明该通道是正常的，如果电平不变化，那么该通道损坏，需要返修。 ---------------------------------------------------------------------------- Rename the mkIIupgrader***.txt file to .exe, then double click to run. 1, support XP,VISTA,WIN7, if you are using XP, please make sure that you have installed the .netframework; 2, please click the right buttom and choose "run as administrator" under WIN7; 3, need AVRSTUDIO support, please install first; 4, The "standalone IO test" firmware is use the test the JTAG port IO, when upgrade this firmware, please power to the JTAG port(VCC and GND), means get the power from target board, then measure the TDI,TDO,TCK,TMS and RST pins, the level on these pins shold be change(0.5Hz), if not the IO port is damaged. QQ:8204136 CP:+8613957118045 email: hdapple_2000@hotmail.com Mcuzone 2011