# Parameters:
# instance.parameter=value #(type, mode) default = 'def value' : description : [min..max]
#----------------------------------------------------------------------------------------------
cpu0.FPU=0 # (bool , init-time) default = '1' : Set whether the model has VFP support
cpu0.DSP=0 # (bool , init-time) default = '1' : Set whether the model has the DSP extension
cpu0.semihosting-enable=0 # (bool , init-time) default = '1' : Enable semihosting SVC traps. Applications that do not use semihosting must set this parameter to false.
cpu0.MPU_S=0x8 # (int , init-time) default = '0x8' : Number of regions in the Secure MPU. If Security Extentions are absent, this is ignored : [0x0..0x10]
cpu0.MPU_NS=0x8 # (int , init-time) default = '0x8' : Number of regions in the Non-Secure MPU. If Security Extentions are absent, this is the total number of MPU regions : [0x0..0x10]
cpu0.ITM=0 # (bool , init-time) default = '1' : Level of instrumentation trace supported. false : No ITM trace included, true: ITM trace included
cpu0.IRQLVL=0x3 # (int , init-time) default = '0x3' : Number of bits of interrupt priority : [0x3..0x8]
cpu0.BIGENDINIT=0 # (bool , init-time) default = '0' : Initialize processor to big endian mode
cpu0.INITSVTOR=0x00000000 # (int , init-time) default = '0x10000000' : Secure vector-table offset at reset : [0x0..0xFFFFFF80]
cpu0.INITNSVTOR=0x0 # (int , init-time) default = '0x0' : Non-Secure vector-table offset at reset : [0x0..0xFFFFFF80]
cpu0.SAU=0x0 # (int , init-time) default = '0x4' : Number of SAU regions (0 => no SAU) : [0x0..0x8]
cpu0.SAU_CTRL.ENABLE=0 # (bool , init-time) default = '0' : Enable SAU at reset
cpu0.SAU_CTRL.ALLNS=0 # (bool , init-time) default = '0' : At reset, the SAU treats entire memory space as NS when the SAU is disabled if this is set
cpu0.NUM_IDAU_REGION=0x0 # (int , init-time) default = '0xA' :
cpu0.LOCK_SAU=0 # (bool , init-time) default = '0' : Lock down of SAU registers write
cpu0.LOCK_S_MPU=0 # (bool , init-time) default = '0' : Lock down of Secure MPU registers write
cpu0.LOCK_NS_MPU=0 # (bool , init-time) default = '0' : Lock down of Non-Secure MPU registers write
cpu0.CPIF=1 # (bool , init-time) default = '1' : Specifies whether the external coprocessor interface is included
cpu0.SECEXT=0 # (bool , init-time) default = '1' : Whether the ARMv8-M Security Extensions are included
fvp_mps2.DISABLE_GATING=1 # (bool , init-time) default = '0' : Disable Memory gating logic
fvp_mps2.NUM_IDAU_REGION=0x0 # (int , init-time) default = '0xA' :
fvp_mps2.SCC_ID.Variant=0x0 # (int , init-time) default = '0x0' : SCC_ID[23:20], X in the FGPA version 'rXpY' : [0x0..0xF]
fvp_mps2.SCC_ID.Revision=0x1 # (int , init-time) default = '0x1' : SCC_ID[3:0], Y in the FGPA version 'rXpY' : [0x0..0xF]
fvp_mps2.platform_type=0x0 # (int , init-time) default = '0x0' : 0:MPS2 ; 1:IoT Kit ; 2:Castor : [0x0..0x2]
fvp_mps2.extra_psram=0 # (bool , init-time) default = '0' : Increases PSRAM to 32Mb
fvp_mps2.UART2.out_file="" # (string, init-time) default = '' : Output file to hold data written by the UART (use '-' to send all output to stdout)
fvp_mps2.UART2.in_file="" # (string, init-time) default = '' : Input file for data to be read by the UART
fvp_mps2.UART2.unbuffered_output=0 # (bool , init-time) default = '0' : Unbuffered output
fvp_mps2.UART2.in_file_escape_sequence="##" # (string, init-time) default = '##' : Input file escape sequence
fvp_mps2.UART2.shutdown_on_eot=0 # (bool , init-time) default = '0' : Shutdown simulation when a EOT (ASCII 4) char is transmitted (useful for regression tests when semihosting is not available)
fvp_mps2.UART2.shutdown_tag="" # (string, run-time ) default = '' : Shutdown simulation when a string is transmitted
fvp_mps2.UART1.out_file="" # (string, init-time) default = '' : Output file to hold data written by the UART (use '-' to send all output to stdout)
fvp_mps2.UART1.in_file="" # (string, init-time) default = '' : Input file for data to be read by the UART
fvp_mps2.UART1.unbuffered_output=0 # (bool , init-time) default = '0' : Unbuffered output
fvp_mps2.UART1.in_file_escape_sequence="##" # (string, init-time) default = '##' : Input file escape sequence
fvp_mps2.UART1.shutdown_on_eot=0 # (bool , init-time) default = '0' : Shutdown simulation when a EOT (ASCII 4) char is transmitted (useful for regression tests when semihosting is not available)
fvp_mps2.UART1.shutdown_tag="" # (string, run-time ) default = '' : Shutdown simulation when a string is transmitted
fvp_mps2.mps2_visualisation.rate_limit-enable=1 # (bool , init-time) default = '1' : Rate limit simulation.
fvp_mps2.mps2_visualisation.disable-visualisation=0 # (bool , init-time) default = '0' : Enable/disable visualisation
fvp_mps2.mps2_visualisation.window_title="CLCD %cpu%" # (string, init-time) default = 'CLCD %cpu%' : Window title (%cpu% is replaced by cpu_name)
fvp_mps2.mps2_visualisation.idler.delay_ms=0x32 # (int , init-time) default = '0x32' : Determines the period, in milliseconds of real time, between gui_callback() calls.
fvp_mps2.telnetterminal0.mode="telnet" # (string, init-time) default = 'telnet' : Terminal initialisation mode
fvp_mps2.telnetterminal0.start_telnet=1 # (bool , init-time) default = '1' : Start telnet if nothing connected
fvp_mps2.telnetterminal0.start_port=0x1388 # (int , init-time) default = '0x1388' : Telnet TCP Port Number : [0x0..0xFFFFFFFF]
fvp_mps2.telnetterminal0.quiet=0 # (bool , init-time) default = '0' : Avoid output on stdout/stderr
fvp_mps2.telnetterminal0.terminal_command="" # (string, init-time) default = '' : Commandline to launch a terminal application and connect to the opened TCP port. Keywords %port and %title will be replaced with the opened port number and component name respectively. An empty string (default behaviour) will launch xterm (Linux) or telnet.exe (Windows)
fvp_mps2.telnetterminal1.mode="telnet" # (string, init-time) default = 'telnet' : Terminal initialisation mode
fvp_mps2.telnetterminal1.start_telnet=1 # (bool , init-time) default = '1' : Start telnet if nothing connected
fvp_mps2.telnetterminal1.start_port=0x1388 # (int , init-time) default = '0x1388' : Telnet TCP Port Number : [0x0..0xFFFFFFFF]
fvp_mps2.telnetterminal1.quiet=0 # (bool , init-time) default = '0' : Avoid output on stdout/stderr
fvp_mps2.telnetterminal1.terminal_command="" # (string, init-time) default = '' : Commandline to launch a terminal application
没有合适的资源?快使用搜索试试~ 我知道了~
STM32hal库4x4矩阵键盘驱动代码
共1019个文件
c:564个
h:250个
s:51个
需积分: 5 6 下载量 168 浏览量
2023-11-22
10:10:58
上传
评论
收藏 13.39MB RAR 举报
温馨提示
常见的4x4矩阵键盘驱动代码,使用的是STM32HAL库代码编写 使用的是STM3F103c8t6 引脚连接 A15 B3 B4 B5 B6 B7 B8 B9 C4 C3 C2 C1 R1 R2 R3 R4 引脚向左。依次向下 测试的时候使用的是OLED屏幕调试数据 有需要的可以下载使用
资源推荐
资源详情
资源评论
收起资源包目录
STM32hal库4x4矩阵键盘驱动代码 (1019个子文件)
iar_cortexM3b_math.a 2.72MB
iar_cortexM3l_math.a 2.71MB
libarm_cortexM3l_math.a 2.56MB
access_control.uvguix.Administrator 94KB
access_control.axf 551KB
keilkill.bat 399B
arm_linear_interp_data.c 4.12MB
arm_common_tables.c 987KB
arm_dct4_init_f32.c 809KB
arm_dct4_init_q31.c 637KB
arm_dct4_init_q15.c 494KB
arm_rfft_init_f32.c 341KB
arm_rfft_init_q31.c 326KB
transform_tests_common_data.c 273KB
arm_rfft_init_q15.c 252KB
stm32f1xx_hal_i2c.c 246KB
stm32f1xx_hal_tim.c 242KB
stm32f1xx_hal_uart.c 132KB
stm32f1xx_hal_spi.c 128KB
stm32f1xx_hal_usart.c 100KB
stm32f1xx_hal_sd.c 100KB
stm32f1xx_hal_irda.c 95KB
stm32f1xx_hal_mmc.c 93KB
stm32f1xx_hal_adc.c 93KB
stm32f1xx_hal_smartcard.c 85KB
stm32f1xx_hal_can.c 81KB
stm32f1xx_hal_tim_ex.c 79KB
stm32f1xx_hal_eth.c 79KB
stm32f1xx_ll_usb.c 77KB
stm32f1xx_hal_nand.c 75KB
stm32f1xx_hal_pcd.c 69KB
filtering_test_common_data.c 64KB
stm32f1xx_hal_i2s.c 63KB
stm32f1xx_hal_rtc.c 59KB
arm_cfft_radix4_q15.c 55KB
stm32f1xx_hal_adc_ex.c 52KB
stm32f1xx_ll_sdmmc.c 50KB
stm32f1xx_hal_rcc.c 49KB
stm32f1xx_hal_hcd.c 48KB
stm32f1xx_hal_dac.c 47KB
stm32f1xx_hal_nor.c 47KB
stm32f1xx_ll_tim.c 45KB
arm_fft_bin_data.c 43KB
arm_conv_partial_fast_q15.c 43KB
stm32f1xx_ll_adc.c 41KB
arm_cfft_radix4_q31.c 39KB
stm32f1xx_ll_fsmc.c 39KB
arm_conv_fast_q15.c 38KB
arm_correlate_fast_q15.c 36KB
stm32f1xx_hal_flash_ex.c 36KB
arm_cfft_radix4_f32.c 34KB
stm32f1xx_hal_sram.c 34KB
controller_test_common_data.c 33KB
stm32f1xx_ll_utils.c 31KB
stm32f1xx_hal_cec.c 31KB
stm32f1xx_hal_pccard.c 30KB
stm32f1xx_hal_rcc_ex.c 30KB
stm32f1xx_hal_flash.c 30KB
arm_fir_f32.c 28KB
stm32f1xx_hal_dma.c 28KB
fir_tests.c 26KB
fast_math_tests_common_data.c 26KB
conv_tests.c 25KB
arm_conv_partial_q15.c 25KB
arm_correlate_q7.c 24KB
arm_conv_partial_q7.c 24KB
arm_graphic_equalizer_example_q31.c 23KB
biquad.c 23KB
arm_correlate_f32.c 22KB
arm_mat_inverse_f64.c 22KB
arm_mat_inverse_f32.c 22KB
arm_correlate_q15.c 22KB
lms.c 22KB
arm_biquad_cascade_stereo_df2T_f32.c 22KB
intrinsics_tests_common_data.c 22KB
arm_conv_q15.c 21KB
stm32f1xx_hal_gpio.c 21KB
stm32f1xx_hal_pwr.c 21KB
arm_conv_partial_f32.c 21KB
arm_conv_q7.c 21KB
arm_fir_q15.c 21KB
arm_conv_partial_fast_opt_q15.c 21KB
arm_conv_partial_fast_q31.c 21KB
arm_conv_partial_opt_q7.c 21KB
stm32f1xx_hal.c 20KB
arm_correlate_q31.c 20KB
arm_conv_partial_opt_q15.c 20KB
stm32f1xx_ll_spi.c 20KB
arm_biquad_cascade_df1_32x64_q31.c 20KB
arm_signal_converge_data.c 20KB
arm_correlate_fast_q31.c 19KB
arm_conv_partial_q31.c 19KB
stm32f1xx_hal_cortex.c 19KB
arm_conv_f32.c 19KB
arm_fir_interpolate_f32.c 18KB
arm_fir_decimate_q15.c 18KB
arm_conv_fast_q31.c 18KB
arm_cfft_f32.c 18KB
arm_depthwise_separable_conv_HWC_q7_nonsquare.c 18KB
stm32f1xx_ll_rtc.c 17KB
共 1019 条
- 1
- 2
- 3
- 4
- 5
- 6
- 11
资源评论
伪装ll
- 粉丝: 1022
- 资源: 8
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- springboot项目超市管理系统.zip
- springboot项目仓库智能仓储系统.zip
- springboot项目病人跟踪治疗信息管理系统.zip
- springboot项目毕业设计管理系统.zip
- springboot项目毕业生就业信息管理系统.zip
- springboot项目毕业设计管理系统设计.zip
- 西门子S7-300型PLC与西门子S7200smart型PLC的以太网通讯例程 为程序 300PLC的IP地址:192.168.0.1 200PLC的IP地址:192.168.0.4 S7-300
- springboot项目奥迪维修保养服务管理系统.zip
- springboot项目班级同学录网站.zip
- springboot项目贝儿米幼儿教育管理系统.zip
- springboot项目KTV点歌系统.zip
- springboot项目Vue汉服文化平台网站.zip
- springboot项目MOON英语学习网站.zip
- springboot项目 星级酒店管理系统.zip
- springboot项目+线上新冠疫苗管理系统.zip
- springboot项目 员工人事管理系统.zip
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功