*********************************************
LSI Corp. MegaRAID MegaCLI Release
*********************************************
Release Date: 01/20/14
========================
Supported Controllers
==================
MegaRAID SAS 9270-8i
MegaRAID SAS 9271-4i
MegaRAID SAS 9271-8i
MegaRAID SAS 9271-8iCC
MegaRAID SAS 9286-8e
MegaRAID SAS 9286CV-8e
MegaRAID SAS 9286CV-8eCC
MegaRAID SAS 9265-8i
MegaRAID SAS 9285-8e
MegaRAID SAS 9240-4i
MegaRAID SAS 9240-8i
MegaRAID SAS 9260-4i
MegaRAID SAS 9260CV-4i
MegaRAID SAS 9260-8i
MegaRAID SAS 9260CV-8i
MegaRAID SAS 9260DE-8i
MegaRAID SAS 9261-8i
MegaRAID SAS 9280-4i4e
MegaRAID SAS 9280-8e
MegaRAID SAS 9280DE-8e
MegaRAID SAS 9280-24i4e
MegaRAID SAS 9280-16i4e
MegaRAID SAS 9260-16i
MegaRAID SAS 9266-4i
MegaRAID SAS 9266-8i
MegaRAID SAS 9285CV-8e
MegaRAID SAS 8704ELP
MegaRAID SAS 8704EM2
MegaRAID SAS 8708ELP
MegaRAID SAS 8708EM2
MegaRAID SAS 8880EM2
MegaRAID SAS 8888ELP
MegaRAID SAS 8308ELP*
MegaRAID SAS 8344ELP*
MegaRAID SAS 84016E*
MegaRAID SAS 8408E*
MegaRAID SAS 8480E*
MegaRAID SATA 300-8ELP*
*These older controllers should work but have not been tested.
Component:
=========
SAS MegaRAID MegaCLI
Release Date: 01/20/14
Version Numbers: MegaCLI
=============== ===========
Current Version 8.07.14
Previous Version 8.07.07
Contents:
=========
This package contains MegaCLI for the following OSes:
DOS
FreeBSD
Linux
Solaris
Windows
Use the MegaCLI components from the folder that matches your OS.
Enhancements and Bug Fixes
==========================
SCGCQ00393585 (DFCT) - VD creation from MegaCli fails on Solaris Sparc 10u9 operating system.
SCGCQ00413883 (DFCT) - "megacli -version -pd -a0" Segmentation Faults if PDs are missing
SCGCQ00445356 (CSET) - Megacli crashes after invoking any command in SGI system with one 9280-8e and 2 quad port qlogic FC cards.
SCGCQ00452383 (CSET) - New version MegaCli did not show iBBU06 over temperature as old when temperature is high
SCGCQ00454980 (CSET) - storcli /c0 show is not listinf SWR controller
SCGCQ00459022 (DFCT) - System crashes when tried to issue command exceeding around 90- 100 characters in EFI Environment.
SCGCQ00470761 (DFCT) - Megacli wrongly reports PCI bus number for 2208 based controllers.
SCGCQ00471745 (DFCT) - Same NVRAM log event IDs with different messages
SCGCQ00475159 (DFCT) - While printing the ldinfo, there are some tabs instead of spaces for indentation so replaced all tabs with spaces.
SCGCQ00531245 (ENHREQ) - Display the NCQ enabled/disabled status of every SATA disk drive in output of StorCLI and MegaCLI
SCGCQ00552754 (ENHREQ) - RAID CLI to display the Patrol Read Start Time
SCGCQ00564123 (ENHREQ) - LIBMODS : Request RAID CLI to display the Patrol Read Start Time
SCGCQ00521386 (DFCT) - Megacli : ADRA is still mentioned in help file, eventhough it is not supported
SCGCQ00572235 (DFCT) - No description for "setdelay" with help file of adppr.
SCGCQ00572270 (DFCT) - adpallinfo is not showing information regarding "NCQ"
SCGCQ00573053 (DFCT) - ncq settings for sata pd is showing disabled
SCGCQ00573091 (DFCT) - NCQ setting for SATA pd is showing disabled with TB fW.
SCGCQ00576028 (DFCT) - No description for "setdelay" with help file of adppr.
Installation Commands:
=======================
Run MegaCli from the Command Prompt. Use -h option to see help menu.
=====================================
=====================================
Previous Releases:
=====================================
=====================================
Component:
=========
SAS MegaRAID MegaCLI
Release Date: 03/02/13
Version Numbers: MegaCLI
=============== ===========
Current Version 8.07.07
Previous Version 8.07.06
Contents:
=========
This package contains MegaCLI for the following OSes:
DOS (version 8.07.06)
FreeBSD
Linux
Solaris
VMware
VMwareMN
Windows
EFI (version 8.07.06)
Use the MegaCLI components from the folder that matches your OS.
Enhancements and Bug Fixes
==========================
SCGCQ00332212 (DFCT) - libsysfs custom implementation issue.
SCGCQ00345839 (DFCT) - While the BBU is fully charged, megacli adpbbucmd reports that it is both discharging and not discharging
SCGCQ00355536 (DFCT) - MegaCli and StorCli can not manage both controllers of different types n the same system under FreeBSD
SCGCQ00362808 (DFCT) - MegaCli 32 Crashes in Windows in specific system
SCGCQ00364411 (DFCT) - Segmentation Fault while running discard preserved cache in megacli
Installation Commands:
=======================
Run MegaCli from the Command Prompt. Use -h option to see help menu.
Component:
=========
SAS MegaRAID MegaCLI
Release Date: 12/28/12
Version Numbers: MegaCLI
=============== ===========
Current Version 8.07.06
Previous Version 8.05.06
Contents:
=========
This package contains MegaCLI for the following OSes:
DOS
FreeBSD
Linux
Solaris
VMware
Windows
EFI
Use the MegaCLI components from the folder that matches your OS.
Enhancements and Bug Fixes
==========================
SCGCQ00289583 Defect CLI CfgLDAdd reports invalid token when -Force and -enblPI are used together
SCGCQ00289585 Defect Command line generated along with press any key in help file operation
SCGCQ00315805 Defect Change the UI fro "adpBBucmd getbbumodes a0" command
SCGCQ00317547 Defect MegaCLI misspell the word "transparent" in bbu mode display
SCGCQ00318648 Defect VD creation on regular drives fails for older firmware where 4K sector is not supported
SCGCQ00319423 Defect FreeBSD MegaCLI v8.05.02 does not detect controller when driver 5.504.05.00 is loaded
SCGCQ00324031 Defect MegaCLI 8.04.07 output typos
SCGCQ00324525 Defect MegaCLI: MFI_STAT_NOT_FOUND returns when retrieving the FW event log.
SCGCQ00325890 Defect CLI/Segmentation fault while running pdlist and cfgdsply in CentOS
SCGCQ00326673 Defect 5.5 CLI Version 8.07.00/Unable to flash the controller's FW using CLI
SCGCQ00327929 Defect Command to enable Patrol Read on SSDs controller property is not shown in Help
SCGCQ00331576 Defect LSI MegaCLI EncInfo (Enclosure Info) duplicates the first power supply status data to both power supplies
SCGCQ00333070 Defect make files updates
SCGCQ00333590 Defect MegaCLI 8.04.07 output typos
SCGCQ00336434 Defect MegaCli reports wrong properties for VD.
SCGCQ00337213 Defect FW reports exit code 0x3d (Unsupported HWR) when getting bbu capacity info for Supercap
SCGCQ00337810 Defect 37 drives shown as unconfigured good in MegaCLI when "enable JBOD=0"
SCGCQ00339405 Defect MegaCLI does not display correct adpBIOS mode using "adpBIOS dsply" command
SCGCQ00341724 Defect FW allows a firmware to be flashed through Online FW Update method in DOS and then breaks into montask
SCGCQ00342848 Defect Add Adapter restart support in CLI
SCGCQ00342993 Defect Add Adapter restart support in CLI
SCGCQ00343308 Defect MegaCLI online help display for "adpBIOS" is not align correctly
SCGCQ00343310 Defect MegaCLI "adpBIOS dsply" command does not display correct information when set to BE or SOE
SCGCQ00344574 Defect MegaCLI does not prompt user to reboot after update firmware
SCGCQ00352210 Defect MegaCli pdFwDownload fails on a SATA drive with an interposer
SCGCQ00353584 Defect CLI has to refresh the MR_CTRL_INFO after the MR_DCMD_CTRL_FLASH_FW_DOWNLOAD for OFU.
SCGCQ00356037 Defect CLI Crashes When Running ADP FW Flash Command
SCGCQ00356190 Defect No controller properties for Online FW Update in MegaCLi
SCGCQ00318641 EnhancementRequest True Online Firmware Update
SCGCQ00322216 EnhancementRequest Help files for Perfmode in adp(set/get)prop are added.
SCGCQ00322234 EnhancementRequest Utilities to show logical block size [AF512e, 512n, 4Kn,..]
SCGCQ00322257 EnhancementRequest Implemented support for 4K sector drives in CLI.
SCGCQ00322317 EnhancementRequest 4k sector support
没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
收起资源包目录
MegaCLI.zip (8个子文件)
MegaCLI
Windows
MegaCli64.exe 2.66MB
MegaCli.exe 1.91MB
8.07.14_MegaCLI.txt 47KB
FreeBSD
MegaCli64.zip 916KB
MegaCLI.zip 868KB
DOS
MegaCLI.exe 1.62MB
Solaris
MegaCli.pkg 8.75MB
Linux
MegaCli-8.07.14-1.noarch.rpm 1.48MB
共 8 条
- 1
资源评论
洛克希德马丁
- 粉丝: 3723
- 资源: 17
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功