cmc-6T9N72X login: root
Password:
Welcome to the CMC firmware version 1.33.A00.200901090855
$ connect switch-1
connect: acquiring remote port.
Connected to remote port.
Escape character is '^\'.
>
(Unit 1 - Waiting to select management unit)>
(Unit 1 - Waiting to select management unit)>
Applying configuration, please wait ...
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial switch configuration, and
gets you up and running as quickly as possible. You can skip the setup
wizard, and enter CLI mode to manually configure the switch. You must
respond to the next question to run the setup wizard within 60 seconds,
otherwise the system will continue with normal operation using the default
system configuration.Note: You can exit the setup wizard at any point
by entering [ctrl+z].
Would you like to run the setup wizard (you must answer this question within
60 seconds)? [Y/N] n
Thank you for using Dell Easy Set up Wizard. You will now enter CLI mode.
console>
console>
console>
console>
console>
console>en
console#configure
console(config)#end
console#show running-config
!Current Configuration:
!System Description "PowerConnect M6220, 2.2.0.3, VxWorks5.5.1"
!System Software Version 2.2.0.3
!System Operational Mode "Normal"
!
configure
stack
member 1 1
exit
ip address 192.168.2.1 255.255.255.0
username "root" password e6e66b8981c1030d5650da159e79539a level 15 encrypted
exit
console#show vlan
