43
SMD Aluminum Electrolytic Capacitors
VE
Features
‧
3 ~ 16
φ
, 85
℃
, 2,000 hours assured
‧
Chip type large capacitance capacitors
‧
Designed for surface mounting on high density PC board.
‧
RoHS Compliance
SPECIFICATIONS
Items Performance
Operating Temperature Range -40 ~ +85℃ ℃
Capacitance Tolerance ±20% (at 120Hz, 20 )℃
Rated Voltage 6.3 ~ 100V 160 ~ 450V
Time after 2 minutes after 5 minutes
Leakage Current (at 20 )℃ Case size
3 ~ 10φ 12.5 ~ 16φ 12.5 ~ 16φ
Leakage Current
I = 0.01CV or 3µA,
whichever is greater
I = 0.03CV or 4µA,
whichever is greater
I = 0.04CV +100µA
Where, C = rated capacitance in µF V = rated DC working voltage in V
Dissipation Factor
Rated Voltage
4 6.3 10 16 25 35 50 63 100
160 ~ 250
400 ~ 450
(Tanδ at 120Hz, 20 )℃
3 ~ 10φ
0.42
0.28
0.24
0.20
0.14
0.12
0.10
0.10
0.10
- -
12.5 ~ 16φ
- 0.38
0.34
0.30
0.26
0.22
0.18
0.14
0.10
0.20 0.25
Impedance ratio shall not exceed the values given in the table below.
Rated Voltage 4.0
6.3
10
16
25
35
50
63
100
160 ~ 250
400 ~ 450
Low Temperature
Z(-25 )℃
φD＜12.5
7 4 4 3
2 2 2 2 2 - -
Characteristics (at 120Hz)
Impedance
/Z(+20 )℃
φD≧12.5
- 5 5 4
2 2 2 2 2 3 6
Ratio Z(-40 )℃
φD＜12.5
15
8 5 4
3 3 3 3 3 - -
/Z(+20 )℃
φD≧12.5
- 14
12
10
5 4 3 3 3 6 10
Test Time 2,000 Hrs
Capacitance Change
Within ±20% of initial value (4V: ±30%)
Load Life Test Dissipation Factor Less than 200% of specified value (4V: ±300%)
Leakage Current Within specified value
* The above specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage applied ℃
for 2,000 hours at 85 .℃
Shelf Life Test
Test time: 1,000 hours; other items are the same as those for the load life test.
The rated voltage shall be applied to the capacitors before the measurements for 160 ~ 450V (Refer to JIS C 5101-4
4.1).
Ripple Current &
Freq.(Hz)
Cap.（µF）
50 120 1K 10K up
Frequency Multipliers Under 1,000 0.80 1.00 1.25 1.40
1,000 ＜ C ≦ 4,700
0.85 1.00 1.15 1.25
DIAGRAM OF DIMENSIONS
Fig. 1 LEAD SPACING AND DIAMETER Unit: mm
φD
L A B C W
P ± 0.2
Fig. No.
3 5.3 ± 0.2
3.3
3.3
1.5
0.45 ~ 0.75
0.8 1
4 5.3 ± 0.2
4.3
4.3
2.0
0.5 ~ 0.8
1.0 1
5 5.3 ± 0.2
5.3
5.3
2.3
0.5 ~ 0.8
1.5 1
6.3 5.3 ± 0.2
6.6
6.6
2.7
0.5 ~ 0.8
2.0 1
6.3 7.7 ± 0.3
6.6
6.6
2.7
0.5 ~ 0.8
2.0 1
8 10 ± 0.5
8.4
8.4
3.0
0.7 ~ 1.1
3.1 1
Fig. 2
8 10.3 ± 0.5
8.4
8.4
3.0
0.7 ~ 1.1
3.1 1
10 10 ± 0.5
10.4
10.4
3.3
0.7 ~ 1.1
4.7 1
10 10.3 ± 0.5
10.4
10.4
3.3
0.7 ~ 1.1
4.7 1
12.5
13.5 ± 0.5
13.0
13.0
4.8
1.1 ~ 1.4
4.4 2
12.5
16 ± 0.5
13.0
13.0
4.8
1.1 ~ 1.4
4.4 2
16 16.5 ± 0.5
17.0
17.0
5.8
1.1 ~ 1.4
6.4 2
- 1
- 2
前往页