Linksys WAP54G v1.0, v1.1, v2.0官方固件3.05.03（英文）

Linksys, A Division of Cisco Systems, Inc. Product: WAP54G v3 (European) Classification: Firmware Release History (European version) Release Date: January 26, 2006 Firmware version: 3.05.03 This firmware is backwards compatible with older versions of the hardware. ______________________________________________________________________________ Version 3.05.03 - Fixed the "restore" bug where the wireless settings (SSID, security settings) were not restored from the config file properly. Version 3.02 (initial release for ver. 3 hardware) - Adds SES support, compatible with older versions of hardware Version 2.08 May 13, 2004 ETSI - Fixed problems with firmware not reporting IP properly to the wizard - Fixed internal firmware date issue NOTE: This firmware and 2.07 firmware are not backwards compatible with older wizards. WPA does not work in Wireless Bridge/Repeater mode in this releas Version 2.07 March 1, 2004 ETSI (ver.2 initial release) - Updated User Interface format and layout - Adds AP Client Mode - Adds Wireless Repeater Mode for WAP54G and WRT54G (router requires fw 2.02.2 or above) - Access points running 1.0x firmware have to upgrade to 1.09.1 before they can be upgraded (filename for 1.09 firmware: osupgrade_for_ver_1_wap54g.trx). Note:WPA does not work in Wireless Bridge/Repeater mode in this release Version 1.09 - The firmware file is called osupgrade_for_ver_1_wap54g.trx - Updates the OS on the Access points running older firmware so they can be upgraded to the 2.07 firmware. NOT A FULL FUNCTIONAL FIRMWARE, REQUIRED FOR FUTURE UPGRADES. SIMULTANEOUSLY RELEASED WITH 2.07 firmware Note: If you try and upgrade an older unit to firmware 2.07 without upgrading the firmware to 1.09.1 prior to upgrade, you may damage the Access Point. Version 1.08 - Complies with final 802.11g standard - Added Wi-Fi Protected Access(TM) support including AES and TKIP encryption - Adds UI control to enable/disable frame bursting - Adds UI control for antenna selection - Added "B-Only" option to wireless modes - Added "Default" option to Basic Rate settings Note:WPA does not work in Wireless Bridge mode in this release Version 1.06, February 18, 2003 - Improves Stability and Performance - Improves Performance in mixed environment - Improves compatibility with Legacy Client Adapter - Fix Event Log (Records client MAC Address) - Fix Bridging with WAP11 on some channels Note: Please make sure to reset/reboot the unit after firmware upgrade is complete. Version 1.05 - Initial Release