mmwave-studio-02-01-01-00

Overview ========== This Matlab script is to post process a *.setup.json file generated from mmwave studio with captured bin files. It generates mat files for raw ADC data and radar cube data. Before Test ============== 1. Install mmwave studio on Windows 2. Install Matlab 2017a or later on windows 3. Setup radar device and data card with a corner reflector at a reasonable distance. Execution steps ================ 1. Following mmwave Studio user guide in section "Capturing Raw ADC Data", configure/capture/export JSON files with captured bin files. 2. From Matlab prompt run post processing script, e.g. a. Generate raw ADC data and radarCube data only: rawDataReader('C:\jsonScript\awr14\awr14xx.setup.json','adcData', 'radarCube', 0) b. Debug plot only rawDataReader('C:\jsonScript\awr14\awr14xx.setup.json','', '', 1) Note: Exported Files from example a can be used for verification script. 3. Run verification code to test the output of generated radar cube data file. verify_data('radarCube.mat'); This script will print out the range profile peak information for verification. Please put a corner reflector before capturing the rad ADC data in step to get a reasonable result. Notes ======= 1. *.setup.json file contains additional files such as *.mmwave.json file and bin files. If files are copied to a new location, please update the path in *.setup.json file properly. 2. If the raw data file is big, it may take some file to finish generating the mat files.