/*
* MT9D112.c
*
*
* Target Devices: Spartan-6
* Tool versions: ISE 13.2
* Description: Camera 's IIC and Gpio software driver
* Created on: 2012-10-25
* Author: zhengxubiao
*/
#include <stdio.h>
#include <malloc.h>
#include <string.h>
#include "xparameters.h"
#include "xstatus.h"
#include "xbasic_types.h"
#include "xiic.h"
#include "MT9D112.h"
/**/
static Xuint8 iic_mt9d112_config_table[][4] =
{
0x30,0x00,0x00,0x00, // Chip version. Default 0x1580 !! only for read !!
0x33,0x86,0x05,0x01, // MCU Reset
0x32,0x90,0x00,0x01, // test pattern
0x32,0x92,0x00,0x00, // R pattern
0x32,0x94,0x00,0xff, // G pattern
0x32,0x96,0x00,0x00, // B pattern
0x33,0x86,0x05,0x00, // MCU Release from reset
0x32,0x14,0x0D,0x85, // Slew rate control, PCLK 5, D 5
0x34,0x1E,0x8F,0x09, // PLL control; bypassed, powered down
0x34,0x1C,0x02,0x30, // PLL dividers; M=80,N=2,fMCLK=fCLKIN*M/(N+1)/8=24MHz
0x34,0x1E,0x8F,0x09, // PLL control; Power-up PLL; wait 1ms after this!
0x34,0x1E,0x8F,0x08, // PLL control; Turn off bypass
0x32,0x02,0x00,0x08, // Standby control; Wake up
0x33,0x8C,0x27,0x97, // Output format; Context B shadow
0x33,0x90,0x00,0x20, // RGB with BT656 codes
0x33,0x8C,0x27,0x2F, // Sensor Row Start Context B
0x33,0x90,0x00,0x04, // 4
0x33,0x8C,0x27,0x33, // Sensor Row End Context B
0x33,0x90,0x04,0xBB, // 1211
0x33,0x8C,0x27,0x31, // Sensor Column Start Context B
0x33,0x90,0x00,0x04, // 4
0x33,0x8C,0x27,0x35, // Sensor Column End Context B
0x33,0x90,0x06,0x4B, // 1611
0x33,0x8C,0x27,0x07, // Output width; Context B
0x33,0x90,0x02,0x80, // 640
0x33,0x8C,0x27,0x09, // Output height; Context B
0x33,0x90,0x01,0xE0, // 480
0x33,0x8C,0x27,0x5F, // Crop X0; Context B
0x33,0x90,0x00,0x00, // 0
0x33,0x8C,0x27,0x63, // Crop Y0; Context B
0x33,0x90,0x00,0x00, // 0
0x33,0x8C,0x27,0x61, // Crop X1; Context B
0x33,0x90,0x06,0x40, // 1600
