没有合适的资源?快使用搜索试试~ 我知道了~
ALTERA EPCS器件的配置说明
5星 · 超过95%的资源 需积分: 50 25 下载量 164 浏览量
2010-10-10
20:58:01
上传
评论 1
收藏 862KB PDF 举报
温馨提示
试读
40页
ALTERA EPCS器件的配置说明,从EPCS1到EPCS128,全部都有详细介绍
资源推荐
资源详情
资源评论
© October 2008 Altera Corporation Configuration Handbook (Complete Two-Volume Set)
4. Serial Configuration Devices (EPCS1,
EPCS4, EPCS16, EPCS64, and EPCS128)
Data Sheet
Introduction
The serial configuration devices provide the following features:
■ 1-, 4-, 16-, 64-, and 128-Mbit flash memory devices that serially configure Stratix
®
III, Stratix II GX, and Stratix II FPGAs, Arria
™
GX FPGAs, and the Cyclone
®
series
FPGAs using the active serial (AS) configuration scheme
■ Easy-to-use four-pin interface
■ Low cost, low-pin count, and non-volatile memory
■ Low current during configuration and near-zero standby mode current
■ 2.7-V to 3.6-V operation
■ EPCS1 and EPCS4 available in 8-pin small outline integrated circuit (SOIC)
package. EPCS16 and EPCS128 available in 8-pin or 16-pin small outline
integrated circuit (SOIC) packages
■ Enables the Nios
®
processor to access unused flash memory through AS memory
interface
■ Re-programmable memory with more than 100,000 erase/program cycles
■ Write protection support for memory sectors using status register bits
■ In-system programming support with SRunner software driver
■ In-system programming support with USB Blaster
™
, Ethernet Blaster
™
, or
ByteBlaster
™
II download cables
■ Additional programming support with the Altera
®
Programming Unit (APU) and
programming hardware from BP Microsystems, System General, and other
vendors
■ Software design support with the Altera Quartus
®
II development system for
Windows-based PCs as well as Sun SPARC station and HP 9000 Series 700/800
■ Delivered with the memory array erased (all the bits set to 1)
1 The term “serial configuration devices” used in this document refers to Altera EPCS1,
EPCS4, EPCS16, EPCS64, and EPCS128.
C51014-3.2
4–2 Chapter 4: Serial Configuration Devices (EPCS1, EPCS4, EPCS16, EPCS64, and EPCS128) Data Sheet
Functional Description
Configuration Handbook (Complete Two-Volume Set) © October 2008 Altera Corporation
Functional Description
With SRAM-based devices that support active serial configuration, configuration data
must be reloaded each time the device powers up, the system reconfigures, or when
new configuration data is required. Serial configuration devices are flash memory
devices with a serial interface that can store configuration data for FPGA devices that
support active serial configuration and reload the data to the device upon power-up
or reconfiguration. Table 4–1 lists the serial configuration devices.
For an 8-pin SOIC package, you can migrate vertically from the EPCS1 to the EPCS4
or EPCS16 since the EPCS devices are offered in the same device package. Similarly,
for a 16-pin SOIC package, you can migrate vertically from the EPCS16 to the EPCS64
or EPCS128.
1 EPCS16 is available in 8-pin and 16-pin SOIC packages.
Table 4–2 lists the serial configuration device used with each Stratix IV FPGA and the
configuration file size. For lager Stratix IV devices such as EPC4SGX290 and
EP4SGX360.
Table 4–2. Serial Configuration Device Support for Stratix IV Devices
Table 4–1. Serial Configuration Devices (3.3-V Operation)
Device Memory Size (Bits)
EPCS1 1,048,576
EPCS4 4,194,304
EPCS16 16,777,216
EPCS64 67,108,864
EPCS128 134,217,728
Stratix IV Device
Raw Binary File
Size (Mbits) (1)
Serial Configuration Device
EPCS1 EPCS4 EPCS16 EPCS64 EPCS128
EP4SE110 53 — — — vv
EP4SE230 104 — — — — v
EP4SE290 141 — — — — v (2)
EP4SE360 141 — — — — v (2)
EP4SE530 188 — — — — —
EP4SE680 234 — — — — —
EP4SGX70 53 — — — vv
EP4SGX110 53 — — — vv
EP4SGX230 104 — — — — v
EP4SGX290 141 — — — — v (2)
EP4SGX360 141 — — — — v (2)
EP4SGX530 188 — — — — —
Notes to Table 4–2:
(1) These values are preliminary. These are uncompressed file sizes.
(2) This is with the Stratix IV compression feature enabled.
Chapter 4: Serial Configuration Devices (EPCS1, EPCS4, EPCS16, EPCS64, and EPCS128) Data Sheet 4–3
Functional Description
© October 2008 Altera Corporation Configuration Handbook (Complete Two-Volume Set)
Table 4–3 lists the serial configuration device used with each Stratix III FPGA and the
configuration file size. Stratix III devices can be used with EPCS16, EPCS64, or
EPCS128.
Table 4–4 lists the serial configuration device used with each Stratix II GX FPGA and
the configuration file size. Stratix II GX devices can be used with EPCS16, EPCS64, or
EPCS128.
Table 4–3. Serial Configuration Device Support for Stratix III Devices
Stratix III Device
Raw Binary File
Size (Bits) (1)
Serial Configuration Device
EPCS1 EPCS4 EPCS16 EPCS64 EPCS128
EP3SL50 22,178,792 — — v (2) vv
EP3SL70 22,178,792 — — v (2) vv
EP3SL110 47,413,312 — — — vv
EP3SL150 47,413,312 — — — vv
EP3SL200 93,324,656 — — — v (2) v
EP3SL340 117,384,664 — — — — v
EP3SE50 25,891,968 — — — vv
EP3SE80 48,225,392 — — — vv
EP3SE110 48,225,392 — — — vv
EP3SE260 93,324,656 — — — v (2) v
Notes to Table 4–3:
(1) These are uncompressed file sizes.
(2) This is with the Stratix III compression feature enabled.
Table 4–4. Serial Configuration Device Support for Stratix II GX Devices
Stratix II GX Device
Raw Binary File
Size (Bits) (1)
Serial Configuration Device
EPCS1 EPCS4 EPCS16 EPCS64 EPCS128
EP2SGX30C
EP2SGX30D
9,640,672 — — vvv
EP2SGX60C
EP2SGX60D
EP2SGX60E
16,951,824 — — v (2) vv
EP2SGX90E
EP2SGX90F
25,699,104 — — — vv
EP2SGX130G 37,325,760 — — — vv
Notes to Table 4–4:
(1) These are uncompressed file sizes.
(2) This is with the Stratix II GX compression feature enabled.
4–4 Chapter 4: Serial Configuration Devices (EPCS1, EPCS4, EPCS16, EPCS64, and EPCS128) Data Sheet
Functional Description
Configuration Handbook (Complete Two-Volume Set) © October 2008 Altera Corporation
Table 4–5 lists the serial configuration device used with each Stratix II FPGA and the
configuration file size. Stratix II devices can be used with EPCS4, EPCS16, EPCS64, or
EPCS128.
Table 4–6 lists the serial configuration device used with each Arria GX FPGA and the
configuration file size. Arria GX devices can be used with EPCS16, EPCS64, or
EPCS128.
Table 4–5. Serial Configuration Device Support for Stratix II Devices
Stratix II Device
Raw Binary File Size
(Bits) (1)
Serial Configuration Device
EPCS4 EPCS16 EPCS64 EPCS128
EP2S15 4,721,544 v (2) vvv
EP2S30 9,640,672 — vvv
EP2S60 16,951,824 — v (2) vv
EP2S90 25,699,104 — v (2) vv
EP2S130 37,325,760 — — vv
EP2S180 49,814,760 — — vv
Notes to Table 4–5:
(1) These are uncompressed file sizes.
(2) This is with the Stratix II compression feature enabled.
Table 4–6. Serial Configuration Device Support for Arria GX Devices
Arria GX Device
Raw Binary File
Size (Bits) (1)
Serial Configuration Device
EPCS1 EPCS4 EPCS16 EPCS64 EPCS128
EP1AGX20C 9,640,672 — — vvv
EP1AGX35C
EP1AGX35D
9,640,672 — — vvv
EP1AGX50C
EP1AGX50D
16,951,824 — — v (2) vv
EP1AGX60C
EP1AGX60D
EP1AGX60E
16,951,824 — — v (2) vv
EP1AGX90E 25,699,104 — — — vv
Notes to Table 4–6:
(1) These are uncompressed file sizes.
(2) This is with the Arria GX compression feature enabled.
Chapter 4: Serial Configuration Devices (EPCS1, EPCS4, EPCS16, EPCS64, and EPCS128) Data Sheet 4–5
Functional Description
© October 2008 Altera Corporation Configuration Handbook (Complete Two-Volume Set)
Table 4–7 lists the serial configuration device used with each Cyclone III FPGA and
the configuration file size. Cyclone III devices can be used with EPCS4, EPCS16,
EPCS64, or EPCS128.
Table 4–8 lists the serial configuration device used with each Cyclone II FPGA and the
configuration file size. Cyclone II devices can be used with EPCS1, EPCS4, EPCS16,
EPCS64, or EPCS128.
Table 4–7. Serial Configuration Device for Cyclone III Devices
Cyclone III Device
Raw Binary File
Size (Bits) (1)
Serial Configuration Device
EPCS1 EPCS4 EPCS16 EPCS64 EPCS128
EP3C5 2,944,088 — vvvv
EP3C10 2,944,088 — vvvv
EP3C16 4,086,848 — vvvv
EP3C25 5,748,552 — v (2) vvv
EP3C40 9,534,304 — — vvv
EP3C55 14,889,560 — — vvv
EP3C80 19,965,752 — — v (2) vv
EP3C120 28,571,696 — — — vv
Notes to Table 4–7:
(1) These are uncompressed file sizes.
(2) This is with the Cyclone III compression feature enabled.
Table 4–8. Serial Configuration Device for Cyclone II Devices
Cyclone II Device
Raw Binary File
Size (Bits) (1)
Serial Configuration Device
EPCS1 EPCS4 EPCS16 EPCS64 EPCS128
EP2C5 1,265,792 v (2) vvvv
EP2C8 1,983,536 — vvvv
EP2C20 3,892,496 — vvvv
EP2C35 6,848,608 — — vvv
EP2C50 9,951,104 — — vvv
EP2C70 14,319,216 — — vvv
Notes to Table 4–8:
(1) These are uncompressed file sizes.
(2) This is with the Cyclone II compression feature enabled.
剩余39页未读,继续阅读
资源评论
- zhuzhsh1232021-05-07不错,可以用。
gengwenbo
- 粉丝: 0
- 资源: 8
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- C# OpenCvSharp Demo - 最大内接圆.rar
- 基于python和Matlab的爬虫+情感分析+时间序列+长图自动分割项目合集(高分项目).zip
- ME2308-VB一款N-Channel沟道SOT23的MOSFET晶体管参数介绍与应用说明
- 使用Java实现的基于最小生成树的旅行商问题.zip
- ME2308D-VB一款N-Channel沟道SOT23的MOSFET晶体管参数介绍与应用说明
- 数据并行C++(Data Parallel C++) 英文版
- MongoDB数据库操作和面试专题及答案.zip
- C#实现通用USB摄像头的读取,拍照,视频录制等功能
- 基于Python实现的多目标旅行商问题算法优化.zip
- LN2312LT1G-VB一款SOT23封装N-Channel场效应MOS管
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功