没有合适的资源?快使用搜索试试~ 我知道了~
温馨提示
试读
64页
本设计系辽宁工业大学 过程装备与控制工程 专业 本科生的毕业论文,指导教授:冯殿义。论文内容为(1)根据实际的任务书及现场工况对整个控制系统进行总体设计。 (2)根据不同的流程对系统进行软硬件组态,在系统各台计算机之间建立 局域网实现信息传输。 (3)根据现场要求对仪表选型 (4)编制仪表数据表、自控设备表; (5)控制系统硬件组态及监控软件编程; (6)采用现场仪表等就地实现数据采集和控制。 (7)将现场数据通过通讯网络传送到生产监控级计算机。生产监控级对来自过程控制级的数据进行集中操作管理,如各种优化计算、统计报表、诊断故障、显示报警等 (8)绘制控制系统回路与接线及安装等工程图纸。
资源推荐
资源详情
资源评论
本科生毕业设计(论文)
摘 要
本设计结合中国石油大连石化公司 10 万吨/年乙苯-苯乙烯装置,对苯乙烯
精馏工序计算机控制系统进行设计。设计内容包括电气原理图与接线图、自控
设备选型、硬件方案设计、监控程序设计四部分。
下位机采用厦门宇电公司的 AI 系列智能仪表,现场传感器将测得的工程量
转换成 4~20mA 标准电流经转换电路转换成 1~5V 电压送入智能仪表,仪表内
置人工智能 PID 调节器,经调调节的电信号以 4~20mA 的标准电流送入现场调
节阀等设备中,以实现生产过程的自动控制。控制的核心在智能仪表中。所有
智能仪表均采用 RS485 接口,并联在 RS485 网络中,RS485 网络通过串口服务
器接入工业以太网,以实现局域网内的通讯。
上位机运行组态软件。在组态软件中建立 I/O 设备,使之与下位机连接,
并配置其通讯参数与下位机相同。建立组态数据库,设置 I/O 设备中需调节或
显示的参数变量,配置量程,报警等参数。建立监控界面,画出控制系统的工
艺流程图,并在监视点上设置相应的参数显示,将其连接至数据库。在控制点
上,通过设置其左键动作的脚本程序操纵数据库变量,以修改智能仪表中的参
数配置。
该控制系统运行时可对生产过程的参数显示和修改。实现在局域网内及广
域网内对现场设备的实时监控。
关键词:乙苯;过程控制;力控软件
I
本科生毕业设计(论文)
Abstract
This design is the computer control system of styrene rectify process styrene,wh-
ich is relating 100,000 tons/year ethylbenzene-styrene Device of petrochemical corpo-
ration of Chinese petroleum in Dalian. Content of this compose conclude four parts,t-
he electric schematic diagram and wiring diagram, the selection of internally piloting
Equipment, the design of hardware project, the design of monitor routine.
Lower computer adopt XIAMEN YUDIAN corporation's AI Series intelligence
instruments. Scene transducer take gotten ' s quantities into 4~20 mA standard
current, wh-ich is convert to 1~5 V voltage through the switching circuit. Artificial
Intelligen-
ce PID adjuster input this voltage and output 4~20 mA standard current. scene control
valve grade Equipment input this current-realize the autocontrol of production.The co-
re of control is in the intelligence appearance.All intelligence instruments adopt RS4-
85 to connect the networks of RS485.In order to realize the communication in the loc-
al area network,RS485 networks connect to the industrial Ethernet through the serial
port server.
Upper computer run Forcecontrol. In order to communicate with the lower com-
puter, found the I/O Equipment and setup the parameter of the communication. The p-
arameter of the upper computer and lower computer are same. Foundate the real-time
database, setup the parametric variable which is needed to regulate or evincive and di-
spose range, alarm isoparameter. Found supervisory control surface, drawn up the co-
ntrol system ' s process flow diagram ,and write ‘###’ where the paremeter is needed
to record. Connect the ‘###’ to the database which is relevant with the paremeter. On
the point of control, through write the playbook of the button,we can control the data-
II
本科生毕业设计(论文)
base, and then modify the parameter of the instruments.
The process parameter can be record and modify when this control system is run-
ning. The instruments on the live can be recorded and controlled in the local area net-
work and world wide web.
Keyword: Ethylbenzene; The process controls; Forcecontrol
目 录
第 1 章 概 述..................................................................................................................1
1.1 课题的背景、来源和意义...............................................................................1
1.2 本课题的主要内容及预期实现的功能...........................................................2
1.3 实现本课题的基本方案...................................................................................3
第 2 章 流程简介...........................................................................................................4
第 3 章 控制方案设计...................................................................................................7
3.1 控制参数与报警值...........................................................................................7
3.2 控制系统硬件方案...........................................................................................7
3.3 控制系统软件方案...........................................................................................9
3.3 控制系统原理...................................................................................................9
第 4 章 控制装置工程设置.........................................................................................11
4.1 概述.................................................................................................................11
4.2 现场仪表.........................................................................................................12
4.2.1 控制点工况条件表...............................................................................12
III
本科生毕业设计(论文)
4.2.2 仪表选型...............................................................................................14
4.2.3 仪表索引...............................................................................................23
4.2.4 仪表数据...............................................................................................24
4.3 控制室仪表.....................................................................................................28
4.3.1 仪表选型...............................................................................................29
4.4 仪表接线.........................................................................................................32
4.4.1 仪表回路接线.......................................................................................32
4.4.2 接线端子箱接线...................................................................................32
4.4.3 仪表盘及接线.......................................................................................33
4.4.4 闪光报警接线.......................................................................................34
4.5 现场仪表安装.................................................................................................34
4.6 供电方案.........................................................................................................36
第 5 章 I/O 设备通讯配置...........................................................................................37
5.1 概述.................................................................................................................37
5.1.1 组态软件简介.......................................................................................37
5.1.2 组态软件与下位机的通信...................................................................40
5.2 串口映射.........................................................................................................43
5.3 硬件组态.........................................................................................................47
5.3.1 新建 I/O 设备........................................................................................47
5.3.2 设备基本参数配置...............................................................................47
5.3.3 高级通讯参数配置...............................................................................49
5.4 串口通讯配置.................................................................................................51
IV
本科生毕业设计(论文)
第 6 章 监控系统操作界面设计.................................................................................53
6.1 概述.................................................................................................................53
6.2 监控界面方案.................................................................................................53
6.3 创建监控工程.................................................................................................54
6.3.1 创建监控系统主界面...........................................................................56
6.3.2 精馏塔界面与功能...............................................................................58
6.3.3 欢迎界面与功能...................................................................................62
6.3.4 顶部导航条功能...................................................................................63
6.3.5 事件记录界面与功能...........................................................................64
6.3.5 报警系统界面与功能...........................................................................66
6.3.6 实时趋势曲线.......................................................................................72
第 7 章 分布式网络通讯.............................................................................................75
7.1 概述.................................................................................................................75
7.2 分布式网络构架.............................................................................................76
7.3 网络节点配置.................................................................................................78
7.3.1. 服务器节点配置..................................................................................78
7.3.2 通讯程序配置.......................................................................................79
7.4 数据源配置.....................................................................................................80
7.4.1 数据源简介...........................................................................................80
7.4.2 数据源配置...........................................................................................81
7.5 服务端数据库组态.........................................................................................82
第 8 章 远程串口广域网解决方案.............................................................................88
V
剩余63页未读,继续阅读
资源评论
- Vince_192012-12-09非常详细具体的论文 有117页 很全面 非常好
diy666
- 粉丝: 2
- 资源: 4
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功