download:
AT firmware which can upgrade by "AT+CIUPDATE"
boot_v1.2+.bin 0x00000
user1.1024.new.2.bin 0x01000
blank.bin 0x7e000 & 0xfe000
or
AT firmware which can not upgrade by "AT+CIUPDATE", but fit in 4Mbit flash
eagle.flash.bin 0x00000
eagle.irom0text.bin 0x40000
blank.bin 0x3e000 & 0x7e000
*NOTICE*:
1.If you use Esp Flash Download Tool, please MAKE SURE to choose FLASH SIZE to 8Mbit.
2.UPDATE is not supported in non-boot mode
Update steps
1.Make sure TE(terminal equipment) is in sta or sta+ap mode
ex. AT+CWMODE=3
OK
AT+RST
2.Make sure TE got ip address
ex. AT+CWJAP="ssid","12345678"
OK
AT+CIFSR
192.168.1.134
3.Let's update
ex. AT+CIUPDATE
+CIPUPDATE:1 found server
+CIPUPDATE:2 connect server
+CIPUPDATE:3 got edition
+CIPUPDATE:4 start start
OK
note. If there are mistakes in the updating, then break update and print ERROR.
INTR_ljy.rar （77个子文件） 
INTR 
.project 832B lib liblwip.a 304KB libphy.a 144KB libpp.a 209KB libnet80211.a 216KB libmain.a 143KB libwpa.a 124KB srouce insight INTR.WK3 11KB INTR.PO 776B INTR.IMD 648B INTR.PR 6KB INTR.PS 193KB INTR.IMB 32KB INTR.PFI 68B INTR.PRI 34KB INTR.IAD 1KB INTR.IAB 88KB .settings tools gen_appbin.py 7KB makefile.sh 318B
xxd.exe 104KB Makefile 10KB .cproject 4KB app .output eagle debug image eagle.app.v6.out 443KB bin gen_misc.sh 3KB user .output eagle debug lib libuser.a 20KB obj hw_timer.o 8KB hw_timer.d 1KB user_main.d 1KB user_main.o 11KB hw_timer.c 4KB Makefile 1KB user_main.c 2KB Makefile 3KB gen_misc.bat 3KB driver uart.c 25KB .output eagle debug lib libdriver.a 45KB obj uart.o 44KB uart.d 1KB Makefile 1KB include user_config.h 1KB hw_timer.h 1KB driver uart_register.h 7KB uart.h 6KB bin boot_v1.2.bin 2KB blank.bin 4KB eagle.irom0text.bin 168KB upgrade at eagle.irom0text.bin 218KB user2.1024.new.2.bin 255KB eagle.flash.bin 32KB user1.1024.new.2.bin 255KB
readme.txt 962B boot_v1.4(b1).bin 3KB eagle.dump 1.59MB esp_init_data_default.bin 128B eagle.flash.bin 28KB eagle.S 3.28MB ld eagle.app.v6.old.1024.app2.ld 5KB eagle.app.v6.new.1024.app2.ld 5KB eagle.app.v6.ld 5KB eagle.app.v6.old.512.app1.ld 5KB eagle.app.v6.old.512.app2.ld 5KB eagle.app.v6.new.2048.ld 5KB eagle.app.v6.new.512.app1.ld 5KB eagle.rom.addr.v6.ld 15KB eagle.app.v6.new.512.app2.ld 5KB eagle.app.v6.new.1024.app1.ld 5KB eagle.app.v6.old.1024.app1.ld 5KB include ets_sys.h 2KB os_type.h 352B ip_addr.h 2KB c_types.h 2KB gpio.h 3KB osapi.h 1KB user_interface.h 11KB spi_flash.h 870B queue.h 7KB eagle_soc.h 11KB
- 1
- 2
- 3
前往页