串口查看软件，SerialEnum

/************************************************************************* * Serial port enumeration routines * * The EnumSerialPort function will populate an array of SSerInfo structs, * each of which contains information about one serial port present in * the system. Note that this code must be linked with setupapi.lib, * which is included with the Win32 SDK. * * by Zach Gorman <gormanjz@hotmail.com> * * Copyright (c) 2002 Archetype Auction Software, Inc. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following condition is * met: Redistributions of source code must retain the above copyright * notice, this condition and the following disclaimer. * * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL ARCHETYPE AUCTION SOFTWARE OR ITS * AFFILIATES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ************************************************************************/ // For MFC #include <stdafx.h> // The next 3 includes are needed for serial port enumeration #include <objbase.h> #include <initguid.h> #include <Setupapi.h> #include "EnumSerial.h" // The following define is from ntddser.h in the DDK. It is also // needed for serial port enumeration. #ifndef GUID_CLASS_COMPORT DEFINE_GUID(GUID_CLASS_COMPORT, 0x86e0d1e0L, 0x8089, 0x11d0, 0x9c, 0xe4, \ 0x08, 0x00, 0x3e, 0x30, 0x1f, 0x73); #endif //--------------------------------------------------------------- // Helpers for enumerating the available serial ports. // These throw a CString on failure, describing the nature of // the error that occurred. void EnumPortsWdm(CArray<SSerInfo,SSerInfo&> &asi); void EnumPortsWNt4(CArray<SSerInfo,SSerInfo&> &asi); void EnumPortsW9x(CArray<SSerInfo,SSerInfo&> &asi); void SearchPnpKeyW9x(HKEY hkPnp, BOOL bUsbDevice, CArray<SSerInfo,SSerInfo&> &asi); //--------------------------------------------------------------- // Routine for enumerating the available serial ports. // Throws a CString on failure, describing the error that // occurred. If bIgnoreBusyPorts is TRUE, ports that can't // be opened for read/write access are not included. void EnumSerialPorts(CArray<SSerInfo,SSerInfo&> &asi, BOOL bIgnoreBusyPorts) { // Clear the output array asi.RemoveAll(); // Use different techniques to enumerate the available serial // ports, depending on the OS we're using OSVERSIONINFO vi; vi.dwOSVersionInfoSize = sizeof(vi); if (!::GetVersionEx(&vi)) { CString str; str.Format("Could not get OS version. (err=%lx)", GetLastError()); throw str; } // Handle windows 9x and NT4 specially if (vi.dwMajorVersion < 5) { if (vi.dwPlatformId == VER_PLATFORM_WIN32_NT) EnumPortsWNt4(asi); else EnumPortsW9x(asi); } else { // Win2k and later support a standard API for // enumerating hardware devices. EnumPortsWdm(asi); } for (int ii=0; ii<asi.GetSize(); ii++) { SSerInfo& rsi = asi[ii]; if (bIgnoreBusyPorts) { // Only display ports that can be opened for read/write HANDLE hCom = CreateFile(rsi.strDevPath, GENERIC_READ | GENERIC_WRITE, 0, /* comm devices must be opened w/exclusive-access */ NULL, /* no security attrs */ OPEN_EXISTING, /* comm devices must use OPEN_EXISTING */ 0, /* not overlapped I/O */ NULL /* hTemplate must be NULL for comm devices */ ); if (hCom == INVALID_HANDLE_VALUE) { // It can't be opened; remove it. asi.RemoveAt(ii); ii--; continue; } else { // It can be opened! Close it and add it to the list ::CloseHandle(hCom); } } // Come up with a name for the device. // If there is no friendly name, use the port name. if (rsi.strFriendlyName.IsEmpty()) rsi.strFriendlyName = rsi.strPortName; // If there is no description, try to make one up from // the friendly name. if (rsi.strPortDesc.IsEmpty()) { // If the port name is of the form "ACME Port (COM3)" // then strip off the " (COM3)" rsi.strPortDesc = rsi.strFriendlyName; int startdex = rsi.strPortDesc.Find(" ("); int enddex = rsi.strPortDesc.Find(")"); if (startdex > 0 && enddex == (rsi.strPortDesc.GetLength()-1)) rsi.strPortDesc = rsi.strPortDesc.Left(startdex); } } } // Helpers for EnumSerialPorts void EnumPortsWdm(CArray<SSerInfo,SSerInfo&> &asi) { CString strErr; // Create a device information set that will be the container for // the device interfaces. GUID *guidDev = (GUID*) &GUID_CLASS_COMPORT; HDEVINFO hDevInfo = INVALID_HANDLE_VALUE; SP_DEVICE_INTERFACE_DETAIL_DATA *pDetData = NULL; try { hDevInfo = SetupDiGetClassDevs( guidDev, NULL, NULL, DIGCF_PRESENT | DIGCF_DEVICEINTERFACE ); if(hDevInfo == INVALID_HANDLE_VALUE) { strErr.Format("SetupDiGetClassDevs failed. (err=%lx)", GetLastError()); throw strErr; } // Enumerate the serial ports BOOL bOk = TRUE; SP_DEVICE_INTERFACE_DATA ifcData; DWORD dwDetDataSize = sizeof(SP_DEVICE_INTERFACE_DETAIL_DATA) + 256; pDetData = (SP_DEVICE_INTERFACE_DETAIL_DATA*) new char[dwDetDataSize]; // This is required, according to the documentation. Yes, // it's weird. ifcData.cbSize = sizeof(SP_DEVICE_INTERFACE_DATA); pDetData->cbSize = sizeof(SP_DEVICE_INTERFACE_DETAIL_DATA); for (DWORD ii=0; bOk; ii++) { bOk = SetupDiEnumDeviceInterfaces(hDevInfo, NULL, guidDev, ii, &ifcData); if (bOk) { // Got a device. Get the details. SP_DEVINFO_DATA devdata = {sizeof(SP_DEVINFO_DATA)}; bOk = SetupDiGetDeviceInterfaceDetail(hDevInfo, &ifcData, pDetData, dwDetDataSize, NULL, &devdata); if (bOk) { CString strDevPath(pDetData->DevicePath); // Got a path to the device. Try to get some more info. TCHAR fname[256]; TCHAR desc[256]; BOOL bSuccess = SetupDiGetDeviceRegistryProperty( hDevInfo, &devdata, SPDRP_FRIENDLYNAME, NULL, (PBYTE)fname, sizeof(fname), NULL); bSuccess = bSuccess && SetupDiGetDeviceRegistryProperty( hDevInfo, &devdata, SPDRP_DEVICEDESC, NULL, (PBYTE)desc, sizeof(desc), NULL); BOOL bUsbDevice = FALSE; TCHAR locinfo[256]; if (SetupDiGetDeviceRegistryProperty( hDevInfo, &devdata, SPDRP_LOCATION_INFORMATION, NULL, (PBYTE)locinfo, sizeof(locinfo), NULL)) { // Just check the first three characters to determine // if the port is connected to the USB bus. This isn't // an infallible method; it would be better to use the // BUS GUID. Currently, Windows doesn't let you query // that though (SPDRP_BUSTYPEGUID seems to exist in // documentation only). bUsbDevice = (strncmp(locinfo, "USB", 3)==0); } if (bSuccess) { // Add an entry to the array SSerInfo si; si.strDevPath = strDevPath; si.strFriendlyName = fname; si.strPortDesc = desc; si.bUsbDevice = bUsbDevice; asi.Add(si); } } else { strErr.Format("SetupDiGetDeviceInterfaceDetail failed. (err=%lx)", GetLastError()); throw strErr; } } else { DWORD err = GetLastError(); if (err != ERROR_NO_MORE_ITEMS) { strErr.Format("SetupDiEnumDevi