没有合适的资源?快使用搜索试试~ 我知道了~
xx项目华为9306交换机[借鉴].pdf
1.该资源内容由用户上传,如若侵权请联系客服进行举报
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
版权申诉
0 下载量 138 浏览量
2021-10-12
23:59:23
上传
评论
收藏 39KB PDF 举报
温馨提示
试读
29页
xx项目华为9306交换机[借鉴].pdf
资源详情
资源评论
资源推荐
Xx 项目网络部分 S9306交换机配置
1. 设备配置:
1.1 S9306-1开机加电自检文件
Dec 9 2011 16:42:57 Quidway %%01ALML/4/ENTRESET(l):LPU frame[1] board[1] is reset.
The reason is: Reset for CSS management.
Dec 9 2011 16:42:57 Quidway %%01ALML/4/PUBLISH_EVENT(l):Publish event. (Slot=1,
Event ID=BOARD_RESET).
Dec 9 2011 16:42:57 Quidway BASETRAP/4/ENTITYRESET:OID
1.3.6.1.4.1.2011.5.25.129.2.1.5 Physical entity is reset. (Index=67371017, Severity=6,
ProbableCause=153, EventType=4, ContainedIn=67371013, PhysicalName=LPU Board 1,
RelativeResource=, ReasonDescription=)
Dec 9 2011 16:42:58 Quidway BASETRAP/4/ENTITYRESET:OID
1.3.6.1.4.1.2011.5.25.129.2.1.5 Physical entity is reset. (Index=67633161, Severity=6,
ProbableCause=153, EventType=4, ContainedIn=67633157, PhysicalName=LPU Board 2,
RelativeResource=, ReasonDescription=)
Dec 9 2011 16:42:58 Quidway BASETRAP/4/ENTITYRESET:OID
1.3.6.1.4.1.2011.5.25.129.2.1.5 Physical entity is reset. (Index=69206025, Severity=6,
ProbableCause=153, EventType=4, ContainedIn=69206021, PhysicalName=MPU Board 8,
RelativeResource=, ReasonDescription=)
Dec 9 2011 16:42:59 Quidway BASETRAP/4/ENTITYRESET:OID
1.3.6.1.4.1.2011.5.25.129.2.1.5 Physical entity is reset. (Index=68943881, Severity=6,
ProbableCause=153, EventType=4, ContainedIn=68943877, PhysicalName=MPU Board 7,
RelativeResource=, ReasonDescription=)
Dec 9 2011 16:42:58 Quidway %%01ALML/4/ENTRESET(l):LPU frame[1] board[2] is reset.
The reason is: Reset for CSS management.
Dec 9 2011 16:42:58 Quidway %%01ALML/4/PUBLISH_EVENT(l):Publish event. (Slot=2,
Event ID=BOARD_RESET).
Dec 9 2011 16:42:58 Quidway %%01IFNET/4/BOARD_DISABLE(l):Board 1/1 has been
unavailable.
Dec 9 2011 16:42:58 Quidway %%01IFNET/4/IF_DISABLE(l):Interface
GigabitEthernet1/1/0/0 has been unavailable.
Input Ctrl + y to Select Debug Console:
Bootrom Version ......................................................... Ver B
L2 Cache Test Start..........................................................OK
BIOS Creation Date ...................................... Aug 12 2011, 12:07:11
BoardType is...........................................................00000006
Bootbus init.................................................................OK
DDR DRAM init................................................................OK
Start Memory Test ? ('t' or 'T' is test):skip
Copying Uncompressed Data from Rom to Ram .................................Done
Uncompressing Data from Rom to RAM ........................................Done
Initializing Flash Module .......................................Done
Starting...
Starting at 0x6c00000...
Initializing Flash Module .......................................Done
Initializing LanSwitch ....................................................Done
Intilalizing Port 0 MAC:08-19-a6-20-8b-90 .................................Done
Intilalizing Port 1 MAC:08-19-a6-20-8b-8f .................................Done
Intilalizing the Debug Port................................................Done
Attached TCP/IP interface to eth unit 1....................................Done
Attaching network interface lo0............................................Done
Load Network Protocol......................................................Done
****************************************************
* *
* Ethernet Switch Bootload, V er 131 *
* *
****************************************************
Copyright(C) 2003-2011 by HUAWEI TECHNOLOGIES CO., LTD.
Creation date: Aug 16 2011, 10:45:49
PCB Version : LE02SRUA VER.D
CPU L2 Cache : 128KB
CPU Clock Speed : 700MHz
BUS Clock Speed : 133MHz
Memory Type : DDR2 SDRAM
Memory Size : 1024MB
Memory Speed : 667MHz
CF Card Init...............................................................Done
Press Ctrl+B to enter Boot Menu... 0
Backplane information: 0x15Auto-booting...
write ulStartupTime to Nvram......ok
write ulStartupTime to flash......ok
ulStartupTime = 0x1
Booting from CFCard[cfcard:/s9300v100r006c00spc800.cc]...
Loading.........................................................................................Done!
Uncompressing...Done!
Starting at 0x400000...
Vxworks Creation Date ....................................Sep 23 2011, 13:56:45
Initializing Flash Module..................................................Done
Intilalizing Port 0 MAC:08-19-a6-20-8b-90 .................................Done
Intilalizing Port 1 MAC:08-19-a6-20-8b-8f .................................Done
Attached TCP/IP interface to eth unit 1
Attaching network interface lo0... done.
Intilalizing FSU PHY ......................................................Done
Product Type...................................................................1P0->
CF Card Init...............................................................Done
Initializing LanSwitch ....................................................Done
g_TotalSruBrdPowr = 0
Bootrom CRC Check test............................. pass.
Epld test .......................................... pass.
Nvram DataBus test ...................................pass.
Nvram AddressBus test ................................pass.
Battery test ........................................pass.
LanSwitch test ......................................pass.
THE PHY(0) test .....................................pass.
THE PHY(1) test .....................................pass.
THE PHY(2) test .....................................pass.
Disable manage port...Done
ProductType:S93
****************************************************************
System startup time : 2011.12.09 16:34:52.000
System startup cputick : 0x00000000 108dd290
System reboot at file : cdev_hal_fun.c, Line: 558
System reboot by task : co0 , VID: 96, OsalID: 0x7e4b660
System reboot type : 10, master reset
System reboot CPUID : 7
System reboot time : 2011.12.09 16:43:00.260
System reboot cputick : 0x00000050 94372814
System reboot callstack:
<-- 0x0053ef38(RBT_RebootSaveInfo) <-- 0x03c98f74(CHAL_ResetLocalBoard)
<-- 0x03c9974c(CHAL_Reset) <-- 0x03c7b430(reset)
<-- 0x03ccba44(CDEV_ResetFrame) <-- 0x03d0c414(CSSM_ResetFrame)
<-- 0x03d08fb4(CSSM_CmdEnableProc) <-- 0x03d0a2bc(CSSM_CmdCenter)
<-- 0x00702c8c(CFG_SendCmdAndGetResponse) <-- 0x0075831c(CLI_MakeMsgPacket)
<-- 0x00763a64(CLI_ProcessMatchedCmd) <-- 0x00764388(CLI_CmdMatch)
<-- 0x007677d0(CLI_DoCmdLine) <-- 0x00767b38(CLI_ExecuteCommand)
<-- 0x0076904c(CLI_CmdParse) <-- 0x00614618(EXEC_Task)
<-- 0x00510d4c(tskAllTaskEntry) <-- 0x00473464(vxTaskEntry)
<-- 0x00000000(0x0)
****************************************************************
DOPRA Library release version 1.6.9.190, by DOPRA.
Copyright (C) 1999-2007 Huawei Technologies Co., Ltd.
DOPRA is a registered trademark of Huawei Technologies Co., Ltd.
This is commercial software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.
Css Enable.....................................................................1
Frame Id.......................................................................1
Self Local SlotId..............................................................7
Self Global SlotId............................................................25
Peer Local SlotId..............................................................8
Peer Global SlotId............................................................26
BOARD ROLE................................................................MASTER
SET INTR HOOK...............................................................DONE
Add Phy Card Entity.........................................................FAIL
DEV_CreateMpuHigigMapExt Success !
Drv_Rcv_Reg OK!
VOS_Start begin ...
Board_InstallDrv ... OK
CSS COMPETITION.............................................................DONE
CSS ROLE.......................................................................4
CSS SYSTEM MASTER.............................................................25
CSS SYSTEM SLA VE..............................................................26PDT init ........................OK
PAT init ........................OK
Task LCSP create............................OK
Init gtlv1 nvram data.......................OK
Init gtlv2 nvram data.......................OK
Get product key.............................OK
Try to get self esn.........................0
Get esn from backplane......................OK
Get self esn................................OK
Adapt function for GTLV2....................OK
VRP_Root begin...
VRP_InitializeTask begin...
Init the Device Link.............CFG_PlaneInit begin..............OK
CFM_Init begin...................OK
CLI_CmdInit begin................OK
VRP_RegestAllLINKCmd begin.......OK
create task begin................
VRPV5 creating Task STND... OK
VRPV5 creating Task INFO... OK
VRPV5 creating Task LCS ... OK
VRPV5 creating Task SAPP... OK
VRPV5 creating Task NQAC... OK
VRPV5 creating Task NQAS... OK
VRPV5 creating Task VOAM... OK
VRPV5 creating Task APS ... OK
VRPV5 creating Task GLRM... OK
VRPV5 creating Task ALM ... OK
VRPV5 creating Task DEV A... OK
VRPV5 creating Task DFSU... OK
VRPV5 creating Task DSMS... OK
VRPV5 creating Task SUPP... OK
VRPV5 creating Task SIMU... OK
VRPV5 creating Task DIAG ... OK
VRPV5 creating Task ELAB... OK
VRPV5 creating Task Xpon... OK
剩余28页未读,继续阅读
cyh76339129
- 粉丝: 1
- 资源: 14万+
下载权益
C知道特权
VIP文章
课程特权
开通VIP
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
评论0