/* deflate.c -- compress data using the deflation algorithm
* Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/*
* ALGORITHM
*
* The "deflation" process depends on being able to identify portions
* of the input text which are identical to earlier input (within a
* sliding window trailing behind the input currently being processed).
*
* The most straightforward technique turns out to be the fastest for
* most input files: try all possible matches and select the longest.
* The key feature of this algorithm is that insertions into the string
* dictionary are very simple and thus fast, and deletions are avoided
* completely. Insertions are performed at each input character, whereas
* string matches are performed only when the previous match ends. So it
* is preferable to spend more time in matches to allow very fast string
* insertions and avoid deletions. The matching algorithm for small
* strings is inspired from that of Rabin & Karp. A brute force approach
* is used to find longer strings when a small match has been found.
* A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
* (by Leonid Broukhis).
* A previous version of this file used a more sophisticated algorithm
* (by Fiala and Greene) which is guaranteed to run in linear amortized
* time, but has a larger average cost, uses more memory and is patented.
* However the F&G algorithm may be faster for some highly redundant
* files if the parameter max_chain_length (described below) is too large.
*
* ACKNOWLEDGEMENTS
*
* The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
* I found it in 'freeze' written by Leonid Broukhis.
* Thanks to many people for bug reports and testing.
*
* REFERENCES
*
* Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
* Available in http://www.ietf.org/rfc/rfc1951.txt
*
* A description of the Rabin and Karp algorithm is given in the book
* "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
*
* Fiala,E.R., and Greene,D.H.
* Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
*
*/
/* @(#) $Id$ */
#include "deflate.h"
const char deflate_copyright[] =
" deflate 1.2.5 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
include such an acknowledgment, I would appreciate that you keep this
copyright string in the executable of your product.
*/
/* ===========================================================================
* Function prototypes.
*/
typedef enum {
need_more, /* block not completed, need more input or more output */
block_done, /* block flush performed */
finish_started, /* finish started, need only more output at next deflate */
finish_done /* finish done, accept no more input or output */
} block_state;
typedef block_state (*compress_func) OF((deflate_state *s, int flush));
/* Compression function. Returns the block state after the call. */
local void fill_window OF((deflate_state *s));
local block_state deflate_stored OF((deflate_state *s, int flush));
local block_state deflate_fast OF((deflate_state *s, int flush));
#ifndef FASTEST
local block_state deflate_slow OF((deflate_state *s, int flush));
#endif
local block_state deflate_rle OF((deflate_state *s, int flush));
local block_state deflate_huff OF((deflate_state *s, int flush));
local void lm_init OF((deflate_state *s));
local void putShortMSB OF((deflate_state *s, uInt b));
local void flush_pending OF((z_streamp strm));
local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size));
#ifdef ASMV
void match_init OF((void)); /* asm code initialization */
uInt longest_match OF((deflate_state *s, IPos cur_match));
#else
local uInt longest_match OF((deflate_state *s, IPos cur_match));
#endif
#ifdef DEBUG
local void check_match OF((deflate_state *s, IPos start, IPos match,
int length));
#endif
/* ===========================================================================
* Local data
*/
#define NIL 0
/* Tail of hash chains */
#ifndef TOO_FAR
# define TOO_FAR 4096
#endif
/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
/* Values for max_lazy_match, good_match and max_chain_length, depending on
* the desired pack level (0..9). The values given below have been tuned to
* exclude worst case performance for pathological files. Better values may be
* found for specific files.
*/
typedef struct config_s {
ush good_length; /* reduce lazy search above this match length */
ush max_lazy; /* do not perform lazy search above this match length */
ush nice_length; /* quit search above this match length */
ush max_chain;
compress_func func;
} config;
#ifdef FASTEST
local const config configuration_table[2] = {
/* good lazy nice chain */
/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
/* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */
#else
local const config configuration_table[10] = {
/* good lazy nice chain */
/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
/* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */
/* 2 */ {4, 5, 16, 8, deflate_fast},
/* 3 */ {4, 6, 32, 32, deflate_fast},
/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */
/* 5 */ {8, 16, 32, 32, deflate_slow},
/* 6 */ {8, 16, 128, 128, deflate_slow},
/* 7 */ {8, 32, 128, 256, deflate_slow},
/* 8 */ {32, 128, 258, 1024, deflate_slow},
/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */
#endif
/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
* For deflate_fast() (levels <= 3) good is ignored and lazy has a different
* meaning.
*/
#define EQUAL 0
/* result of memcmp for equal strings */
#ifndef NO_DUMMY_DECL
struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
#endif
/* ===========================================================================
* Update a hash value with the given input byte
* IN assertion: all calls to to UPDATE_HASH are made with consecutive
* input characters, so that a running hash key can be computed from the
* previous key instead of complete recalculation each time.
*/
#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
/* ===========================================================================
* Insert string str in the dictionary and set match_head to the previous head
* of the hash chain (the most recent string with same hash key). Return
* the previous length of the hash chain.
* If this file is compiled with -DFASTEST, the compression level is forced
* to 1, and no hash chains are maintained.
* IN assertion: all calls to to INSERT_STRING are made with consecutive
* input characters and the first MIN_MATCH bytes of str are valid
* (except for the last MIN_MATCH-1 bytes of the input file).
*/
#ifdef FASTEST
#define INSERT_STRING(s, str, match_head) \
(UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
match_head = s->head[s->ins_h], \
s->head[s->ins_h] = (Pos)(str))
#else
#define INSERT_STRING(s, str, match_head) \
(UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \
s->head[s->ins_h] = (Pos)(str))
#endif
/* ===========================================================================
* Initialize the hash table (avoiding 64K overflow for 16 bit systems).
* prev[] will be initialized on the fly.
*/
#define CLEAR_HASH(s) \
s->head[s->ha
activeMQ所需的头文件和静态库 （1471个子文件） 
Makefile.am 59KB deflate.c 66KB inflate.c 51KB trees.c 44KB infback.c 22KB gzread.c 20KB gzwrite.c 14KB gzlib.c 14KB inftrees.c 13KB crc32.c 13KB inffast.c 13KB zutil.c 7KB adler32.c 5KB uncompr.c 2KB gzclose.c 678B ActiveMQConsumerKernel.cpp 80KB ActiveMQConnection.cpp 70KB AbstractQueuedSynchronizer.cpp 64KB ThreadPoolExecutor.cpp 61KB Threading.cpp 53KB ActiveMQSessionKernel.cpp 52KB FailoverTransport.cpp 47KB AdvisorySupport.cpp 44KB ReentrantReadWriteLock.cpp 41KB ConnectionStateTracker.cpp 34KB ActiveMQConnectionFactory.cpp 32KB ActiveMQStreamMessage.cpp 31KB URI.cpp 31KB Message.cpp 31KB ByteArrayAdapter.cpp 25KB TcpSocket.cpp 25KB BaseDataStreamMarshaller.cpp 25KB BitSet.cpp 24KB ActiveMQTransactionContext.cpp 24KB OpenSSLSocket.cpp 24KB StompWireFormat.cpp 23KB Socket.cpp 23KB ByteArrayBuffer.cpp 22KB CmsTemplate.cpp 22KB ActiveMQBytesMessage.cpp 21KB URIHelper.cpp 21KB MessageMarshaller.cpp 19KB Properties.cpp 19KB ConsumerInfo.cpp 19KB OpenWireFormat.cpp 18KB MD5MessageDigestSpi.cpp 17KB System.cpp 16KB PrimitiveValueNode.cpp 16KB Timer.cpp 16KB InactivityMonitor.cpp 16KB ActiveMQMapMessage.cpp 16KB PlatformThread.cpp 16KB PrimitiveTypesMarshaller.cpp 16KB DataInputStream.cpp 15KB MD4MessageDigestSpi.cpp 15KB Deflater.cpp 15KB CharBuffer.cpp 14KB PlatformThread.cpp 14KB ActiveMQMessageTransformation.cpp 14KB Math.cpp 14KB Inflater.cpp 14KB UUID.cpp 13KB Long.cpp 13KB Integer.cpp 13KB BrokerInfo.cpp 13KB StompHelper.cpp 13KB ConnectionInfo.cpp 13KB BackupTransportPool.cpp 13KB SHA1MessageDigestSpi.cpp 13KB WireFormatInfo.cpp 12KB ConsumerInfoMarshaller.cpp 12KB XATransactionId.cpp 12KB MessageAck.cpp 12KB TcpTransport.cpp 12KB ActiveMQMessageAudit.cpp 12KB ResponseCorrelator.cpp 12KB ActiveMQProducerKernel.cpp 12KB ActiveMQDestinationSource.cpp 12KB ServerSocket.cpp 12KB IOTransport.cpp 12KB DataOutputStream.cpp 11KB BufferedInputStream.cpp 11KB ActiveMQDestination.cpp 11KB StompFrame.cpp 11KB URISupport.cpp 11KB ReentrantLock.cpp 11KB CharArrayBuffer.cpp 11KB OpenSSLContextSpi.cpp 11KB Thread.cpp 11KB HexStringParser.cpp 11KB BrokerInfoMarshaller.cpp 11KB MarshallingSupport.cpp 11KB ByteBuffer.cpp 10KB ConnectionInfoMarshaller.cpp 10KB MessagePropertyInterceptor.cpp 10KB DoubleArrayBuffer.cpp 10KB ConnectionControl.cpp 10KB ShortArrayBuffer.cpp 10KB FloatArrayBuffer.cpp 10KB LongArrayBuffer.cpp 10KB共 1471 条
- 1
- 2
- 3
- 4
- 5
- 6
- 15
资源评论
wjqzzzy2015-07-15头文件编译不知道哪里出错了
pan_fenf2014-08-10刚好用到 谢谢
