H264编解码rtp发送

#include "h264.h" FILE * pinfile = NULL; char * inputfilename = "..\\H264_STREAM\\sender.264"; int InitiateWinsock() { int Error; WORD Version=MAKEWORD(2,2); WSADATA WsaData; Error=WSAStartup(Version,&WsaData); //Start up WSA if(Error!=0) return 0; else { if(LOBYTE(WsaData.wVersion)!=2||HIBYTE(WsaData.wHighVersion)!=2) { WSACleanup(); return 0; } } return 1; } NALU_t *AllocNALU(int buffersize) { NALU_t *n; if ((n = (NALU_t*)calloc (1, sizeof(NALU_t))) == NULL) { printf("AllocNALU Error: Allocate Meory To NALU_t Failed "); exit(0); } n->max_size=buffersize; //Assign buffer size if ((n->buf = (char*)calloc (buffersize, sizeof (char))) == NULL) { free (n); printf ("AllocNALU Error: Allocate Meory To NALU_t Buffer Failed "); exit(0); } return n; } void FreeNALU(NALU_t *n) { if (n) { if (n->buf) { free(n->buf); n->buf=NULL; } free (n); } } int OpenBitstreamFile (char *fn) { if (NULL == (pinfile = fopen(fn, "rb"))) { printf("Error: Open input file error\n"); getchar(); } return 1; } static int FindStartCode2 (unsigned char *Buf) { if(Buf[0]!=0 || Buf[1]!=0 || Buf[2] !=1) //Check whether buf is 0x000001 { return 0; } else { return 1; } } static int FindStartCode3 (unsigned char *Buf) { if(Buf[0]!=0 || Buf[1]!=0 || Buf[2] !=0 || Buf[3] !=1) //Check whether buf is 0x00000001 { return 0; } else { return 1; } } int GetAnnexbNALU (NALU_t *nalu) { int pos = 0; //一个nal到下一个nal 数据移动的指针 int StartCodeFound = 0; //是否找到下一个nal 的前缀 int rewind = 0; //判断 前缀所占字节数 3或 4 unsigned char * Buf = NULL; static int info2 =0 ; static int info3 =0 ; if ((Buf = (unsigned char*)calloc (nalu->max_size , sizeof(char))) == NULL) { printf ("GetAnnexbNALU Error: Could not allocate Buf memory\n"); } nalu->startcodeprefix_len = 3; //初始化前缀位三个字节 if (3 != fread (Buf, 1, 3, pinfile))//从文件读取三个字节到buf { free(Buf); return 0; } info2 = FindStartCode2 (Buf); //Check whether Buf is 0x000001 if(info2 != 1) { //If Buf is not 0x000001,then read one more byte if(1 != fread(Buf+3, 1, 1, pinfile)) { free(Buf); return 0; } info3 = FindStartCode3 (Buf); //Check whether Buf is 0x00000001 if (info3 != 1) //If not the return -1 { free(Buf); return -1; } else { //If Buf is 0x00000001,set the prefix length to 4 bytes pos = 4; nalu->startcodeprefix_len = 4; } } else { //If Buf is 0x000001,set the prefix length to 3 bytes pos = 3; nalu->startcodeprefix_len = 3; } //寻找下一个字符符号位， 即 寻找一个nal 从一个0000001 到下一个00000001 StartCodeFound = 0; info2 = 0; info3 = 0; while (!StartCodeFound) { if (feof (pinfile)) //如果到了文件结尾 { nalu->len = (pos-1) - nalu->startcodeprefix_len; //从0 开始 memcpy (nalu->buf, &Buf[nalu->startcodeprefix_len], nalu->len); nalu->forbidden_bit = nalu->buf[0] & 0x80; // 1 bit--10000000 nalu->nal_reference_idc = nalu->buf[0] & 0x60; // 2 bit--01100000 nalu->nal_unit_type = (nalu->buf[0]) & 0x1f; // 5 bit--00011111 free(Buf); return pos-1; } Buf[pos++] = fgetc (pinfile); //Read one char to the Buffer 一个字节一个字节从文件向后找 info3 = FindStartCode3(&Buf[pos-4]); //Check whether Buf is 0x00000001 if(info3 != 1) { info2 = FindStartCode2(&Buf[pos-3]); //Check whether Buf is 0x000001 } StartCodeFound = (info2 == 1 || info3 == 1); //如果找到下一个前缀 } rewind = (info3 == 1)? -4 : -3; if (0 != fseek (pinfile, rewind, SEEK_CUR)) //将文件内部指针移动到 nal 的末尾 { free(Buf); printf("GetAnnexbNALU Error: Cannot fseek in the bit stream file"); } nalu->len = (pos + rewind) - nalu->startcodeprefix_len; //设置包含nal 头的数据长度 memcpy (nalu->buf, &Buf[nalu->startcodeprefix_len], nalu->len);//拷贝一个nal 数据到数组中 nalu->forbidden_bit = nalu->buf[0] & 0x80; //1 bit 设置nal 头 nalu->nal_reference_idc = nalu->buf[0] & 0x60; // 2 bit nalu->nal_unit_type = (nalu->buf[0]) & 0x1f; // 5 bit free(Buf); return (pos + rewind); //Return the length of bytes from between one NALU and the next NALU } int main() { SOCKET socket_cli; SOCKADDR_IN addrser;//Initialize Win Socket NALU_t * n = NULL; unsigned char sendbuf[MAXDATASIZE]; RTP_HEADER * rtp_hdr = NULL ; int pocket_number = 0; //包号 int frame_number = 0; //帧号 int total_sent = 0; //已经发送的总共数据 NALU_HEADER * nalu_hdr = NULL; char* nalu_payload = NULL; int bytes = 0; //一次发送的数据 int timestamp = 0; FU_INDICATOR *fu_ind = NULL ; FU_HEADER *fu_hdr = NULL ; InitiateWinsock(); //创建socket套接字 socket_cli= socket(AF_INET ,SOCK_DGRAM/*UDP协议的是流式*/,0); addrser.sin_addr.S_un.S_addr =inet_addr(USE_IP); addrser.sin_family = AF_INET; addrser.sin_port = htons(USE_PORT); //网络字节序 OpenBitstreamFile(inputfilename); //打开本地要传输的文件 n = AllocNALU(8000000); //分配nal 资源 while(!feof(pinfile)) //如果未到文件结尾 { GetAnnexbNALU(n); printf("NALU--- forbidden_bit : %d\n", n->forbidden_bit); printf("NALU--- nal_reference_idc : %d\n", n->nal_reference_idc); printf("NALU--- Type : %d\n", n->nal_unit_type); printf("NALU--- startcodeprefix_len : %d\n", n->startcodeprefix_len); printf("NALU--- len : %d\n", n->len); printf("NALU--- max_size : %d\n", n->max_size); memset(sendbuf,0,MAXDATASIZE); rtp_hdr =(RTP_HEADER*)&sendbuf[0]; rtp_hdr->payloadtype = H264; //Payload type rtp_hdr->version = 2; //Payload version rtp_hdr->marker = 0; //Marker sign rtp_hdr->ssrc = htonl(frame_number++); //帧数 if (n->len < 1400) //打单包 { rtp_hdr->marker = 1; rtp_hdr->seq_no = htons(pocket_number ++); nalu_hdr =(NALU_HEADER*)&sendbuf[12]; nalu_hdr->F = n->forbidden_bit >> 7; nalu_hdr->NRI = n->nal_reference_idc >> 5; nalu_hdr->TYPE = n->nal_unit_type; nalu_payload = &sendbuf[13]; memcpy(nalu_payload,n->buf+1,n->len-1); timestamp = timestamp + 6000; rtp_hdr->timestamp = htonl(timestamp); bytes = n->len + 12 ; Sleep(40); sendto(socket_cli,sendbuf,bytes,0,(SOCKADDR *)&addrser,sizeof(SOCKADDR)); total_sent += bytes; printf("单包：Total bytes : %d\n",bytes); printf("Total bytes sent : %d\n",total_sent); } else if (n->len >= 1400) //打分片包 { int k=0; int l=0; int t = 0; //分片包片号 k = n->len / 1400; //分片数目 l = n->len % 1400; //最后一个包的长度 timestamp = timestamp + 6000; rtp_hdr->timestamp = htonl(timestamp); while(t <= k) { rtp_hdr->seq_no = htons(pocket_number ++); //包号 if(!t) //分片打包第一个分片 { rtp_hdr->marker = 0; fu_ind =(FU_INDICATOR*)&sendbuf[12]; fu_ind->F=n->forbidden_bit >> 7; fu_ind->NRI=n->nal_reference_idc>>5; fu_ind->TYPE=28; fu_hdr =(FU_HEADER*)&sendbuf[13]; fu_hdr->E=0;