.. cmake-manual-description: CTest Command-Line Reference
ctest(1)
********
.. contents::
Synopsis
========
.. parsed-literal::
ctest [<options>]
ctest --build-and-test <path-to-source> <path-to-build>
--build-generator <generator> [<options>...]
[--build-options <opts>...] [--test-command <command> [<args>...]]
ctest {-D <dashboard> | -M <model> -T <action> | -S <script> | -SP <script>}
[-- <dashboard-options>...]
Description
===========
The **ctest** executable is the CMake test driver program.
CMake-generated build trees created for projects that use the
:command:`enable_testing` and :command:`add_test` commands have testing support.
This program will run the tests and report results.
Options
=======
``-C <cfg>, --build-config <cfg>``
Choose configuration to test.
Some CMake-generated build trees can have multiple build
configurations in the same tree. This option can be used to specify
which one should be tested. Example configurations are ``Debug`` and
``Release``.
``--progress``
Enable short progress output from tests.
When the output of **ctest** is being sent directly to a terminal, the
progress through the set of tests is reported by updating the same line
rather than printing start and end messages for each test on new lines.
This can significantly reduce the verbosity of the test output.
Test completion messages are still output on their own line for failed
tests and the final test summary will also still be logged.
This option can also be enabled by setting the environment variable
:envvar:`CTEST_PROGRESS_OUTPUT`.
``-V,--verbose``
Enable verbose output from tests.
Test output is normally suppressed and only summary information is
displayed. This option will show all test output.
``-VV,--extra-verbose``
Enable more verbose output from tests.
Test output is normally suppressed and only summary information is
displayed. This option will show even more test output.
``--debug``
Displaying more verbose internals of CTest.
This feature will result in a large number of output that is mostly
useful for debugging dashboard problems.
``--output-on-failure``
Output anything outputted by the test program if the test should fail.
This option can also be enabled by setting the
:envvar:`CTEST_OUTPUT_ON_FAILURE` environment variable
``-F``
Enable failover.
This option allows CTest to resume a test set execution that was
previously interrupted. If no interruption occurred, the ``-F`` option
will have no effect.
``-j <jobs>, --parallel <jobs>``
Run the tests in parallel using the given number of jobs.
This option tells CTest to run the tests in parallel using given
number of jobs. This option can also be set by setting the
:envvar:`CTEST_PARALLEL_LEVEL` environment variable.
This option can be used with the :prop_test:`PROCESSORS` test property.
See `Label and Subproject Summary`_.
``--test-load <level>``
While running tests in parallel (e.g. with ``-j``), try not to start
tests when they may cause the CPU load to pass above a given threshold.
When ``ctest`` is run as a `Dashboard Client`_ this sets the
``TestLoad`` option of the `CTest Test Step`_.
``-Q,--quiet``
Make CTest quiet.
This option will suppress all the output. The output log file will
still be generated if the ``--output-log`` is specified. Options such
as ``--verbose``, ``--extra-verbose``, and ``--debug`` are ignored
if ``--quiet`` is specified.
``-O <file>, --output-log <file>``
Output to log file.
This option tells CTest to write all its output to a ``<file>`` log file.
``-N,--show-only[=<format>]``
Disable actual execution of tests.
This option tells CTest to list the tests that would be run but not
actually run them. Useful in conjunction with the ``-R`` and ``-E``
options.
``<format>`` can be one of the following values.
``human``
Human-friendly output. This is not guaranteed to be stable.
This is the default.
``json-v1``
Dump the test information in JSON format.
See `Show as JSON Object Model`_.
``-L <regex>, --label-regex <regex>``
Run tests with labels matching regular expression.
This option tells CTest to run only the tests whose labels match the
given regular expression.
``-R <regex>, --tests-regex <regex>``
Run tests matching regular expression.
This option tells CTest to run only the tests whose names match the
given regular expression.
``-E <regex>, --exclude-regex <regex>``
Exclude tests matching regular expression.
This option tells CTest to NOT run the tests whose names match the
given regular expression.
``-LE <regex>, --label-exclude <regex>``
Exclude tests with labels matching regular expression.
This option tells CTest to NOT run the tests whose labels match the
given regular expression.
``-FA <regex>, --fixture-exclude-any <regex>``
Exclude fixtures matching ``<regex>`` from automatically adding any tests to
the test set.
If a test in the set of tests to be executed requires a particular fixture,
that fixture's setup and cleanup tests would normally be added to the test set
automatically. This option prevents adding setup or cleanup tests for fixtures
matching the ``<regex>``. Note that all other fixture behavior is retained,
including test dependencies and skipping tests that have fixture setup tests
that fail.
``-FS <regex>, --fixture-exclude-setup <regex>``
Same as ``-FA`` except only matching setup tests are excluded.
``-FC <regex>, --fixture-exclude-cleanup <regex>``
Same as ``-FA`` except only matching cleanup tests are excluded.
``-D <dashboard>, --dashboard <dashboard>``
Execute dashboard test.
This option tells CTest to act as a CDash client and perform a
dashboard test. All tests are ``<Mode><Test>``, where ``<Mode>`` can be
``Experimental``, ``Nightly``, and ``Continuous``, and ``<Test>`` can be
``Start``, ``Update``, ``Configure``, ``Build``, ``Test``,
``Coverage``, and ``Submit``.
See `Dashboard Client`_.
``-D <var>:<type>=<value>``
Define a variable for script mode.
Pass in variable values on the command line. Use in conjunction
with ``-S`` to pass variable values to a dashboard script. Parsing ``-D``
arguments as variable values is only attempted if the value
following ``-D`` does not match any of the known dashboard types.
``-M <model>, --test-model <model>``
Sets the model for a dashboard.
This option tells CTest to act as a CDash client where the ``<model>``
can be ``Experimental``, ``Nightly``, and ``Continuous``.
Combining ``-M`` and ``-T`` is similar to ``-D``.
See `Dashboard Client`_.
``-T <action>, --test-action <action>``
Sets the dashboard action to perform.
This option tells CTest to act as a CDash client and perform some
action such as ``start``, ``build``, ``test`` etc. See
`Dashboard Client Steps`_ for the full list of actions.
Combining ``-M`` and ``-T`` is similar to ``-D``.
See `Dashboard Client`_.
``-S <script>, --script <script>``
Execute a dashboard for a configuration.
This option tells CTest to load in a configuration script which sets
a number of parameters such as the binary and source directories.
Then CTest will do what is required to create and run a dashboard.
This option basically sets up a dashboard and then runs ``ctest -D``
with the appropriate options.
See `Dashboard Client`_.
``-SP <script>, --script-new-process <script>``
Execute a dashboard for a configuration.
This option does the same operations as ``-S`` but it will do them in a
separate process. This is primarily useful in cases where the
script may modify the environment and you do not want the modified
environment to impact other ``-S`` scripts.
See `Dashboard Client`_.
``-I [Start,End,Stride,test#,test#|Test file], --tests-information``
Run a specific number of tests by number.
This option causes CTest to run tests starting at number ``Start``,
ending at number ``End``, and incrementing by ``Stride``. Any additional
numbe
没有合适的资源?快使用搜索试试~ 我知道了~
cmake-3.15.6-win32-x86.zip
共2000个文件
txt:1350个
html:650个
需积分: 5 0 下载量 140 浏览量
2024-02-03
00:44:55
上传
评论
收藏 27.75MB ZIP 举报
温馨提示
cmake安装包
资源推荐
资源详情
资源评论
收起资源包目录
cmake-3.15.6-win32-x86.zip (2000个子文件)
genindex.html 1.71MB
ctest.1.html 154KB
cmake-buildsystem.7.html 147KB
cmake-file-api.7.html 103KB
cmake-generator-expressions.7.html 92KB
cmake-toolchains.7.html 86KB
cmake-variables.7.html 85KB
cmake-packages.7.html 82KB
rpm.html 81KB
cmake.1.html 80KB
cmake-properties.7.html 65KB
cmake-language.7.html 60KB
deb.html 52KB
cmake-qt.7.html 47KB
cmake-compile-features.7.html 45KB
cmake-server.7.html 44KB
cmake-developer.7.html 39KB
cmake-modules.7.html 36KB
external.html 35KB
cmake-policies.7.html 34KB
ifw.html 33KB
ccmake.1.html 29KB
cpack.1.html 28KB
nuget.html 23KB
wix.html 22KB
cmake-commands.7.html 21KB
cmake-gui.1.html 19KB
FIXTURES_REQUIRED.html 18KB
freebsd.html 16KB
nsis.html 16KB
cmake-generators.7.html 15KB
dmg.html 14KB
CMAKE_MAKE_PROGRAM.html 12KB
CMAKE_GENERATOR_TOOLSET.html 11KB
cmake-env-variables.7.html 11KB
productbuild.html 11KB
bundle.html 10KB
CMAKE_MSVC_RUNTIME_LIBRARY.html 10KB
CTEST_COVERAGE_COMMAND.html 10KB
INCLUDE_DIRECTORIES.html 10KB
CMAKE_VERSION.html 10KB
CMAKE_SYSTEM_PREFIX_PATH.html 10KB
CMAKE_LANG_LINKER_WRAPPER_FLAG.html 10KB
CMAKE_POLICY_WARNING_CMPNNNN.html 10KB
CMAKE_MAXIMUM_RECURSION_DEPTH.html 10KB
CMAKE_GLOBAL_AUTOGEN_TARGET.html 9KB
TIMEOUT_AFTER_MATCH.html 9KB
CMAKE_INSTALL_PREFIX.html 9KB
CMAKE_PROJECT_HOMEPAGE_URL.html 9KB
CMAKE_PROJECT_DESCRIPTION.html 9KB
COMPILE_DEFINITIONS.html 9KB
CMAKE_CROSSCOMPILING.html 9KB
FIXTURES_SETUP.html 9KB
CMAKE_PROJECT_VERSION.html 9KB
FIXTURES_CLEANUP.html 9KB
CMAKE_DEBUG_TARGET_PROPERTIES.html 9KB
CPACK_SET_DESTDIR.html 9KB
CMAKE_PREFIX_PATH.html 9KB
CMAKE_GENERATOR_PLATFORM.html 8KB
CMAKE_SYSTEM_IGNORE_PATH.html 8KB
CMAKE_USER_MAKE_RULES_OVERRIDE.html 8KB
CMAKE_PROJECT_NAME.html 8KB
CMAKE_IGNORE_PATH.html 8KB
CMAKE_FIND_PACKAGE_WARN_NO_MODULE.html 8KB
CMAKE_INSTALL_DEFAULT_DIRECTORY_PERMISSIONS.html 8KB
CMAKE_FIND_NO_INSTALL_PREFIX.html 8KB
CMAKE_FIND_PACKAGE_PREFER_CONFIG.html 8KB
CMAKE_SYSTEM_VERSION.html 8KB
CMAKE_BUILD_TYPE.html 8KB
CMAKE_FIND_PACKAGE_SORT_ORDER.html 8KB
CMAKE_TRY_COMPILE_PLATFORM_VARIABLES.html 8KB
CMAKE_CFG_INTDIR.html 8KB
CMAKE_ANDROID_STL_TYPE.html 8KB
CMAKE_GLOBAL_AUTORCC_TARGET.html 8KB
CMAKE_FIND_ROOT_PATH_MODE_INCLUDE.html 8KB
CMAKE_FIND_ROOT_PATH_MODE_PACKAGE.html 8KB
CMAKE_FIND_ROOT_PATH_MODE_LIBRARY.html 8KB
CMAKE_SYSTEM_NAME.html 7KB
CMAKE_FIND_ROOT_PATH_MODE_PROGRAM.html 7KB
CMAKE_INSTALL_MESSAGE.html 7KB
CMAKE_POLICY_DEFAULT_CMPNNNN.html 7KB
cpack-generators.7.html 7KB
CMAKE_EXPORT_PACKAGE_REGISTRY.html 7KB
CMAKE_STAGING_PREFIX.html 7KB
archive.html 7KB
CMAKE_LANG_FLAGS.html 7KB
CMAKE_EXPORT_COMPILE_COMMANDS.html 7KB
CMAKE_VS_GLOBALS.html 7KB
CMAKE_EXPORT_NO_PACKAGE_REGISTRY.html 7KB
CMAKE_LINK_SEARCH_START_STATIC.html 7KB
CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY.html 7KB
CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY.html 7KB
CMAKE_LANG_IMPLICIT_LINK_DIRECTORIES.html 7KB
COMPILE_DEFINITIONS_CONFIG.html 7KB
VS_GLOBAL_SECTION_POST_section.html 7KB
CMAKE_OSX_SYSROOT.html 7KB
PROJECT-NAME_VERSION.html 7KB
CMAKE_OSX_DEPLOYMENT_TARGET.html 7KB
CMAKE_LINK_SEARCH_END_STATIC.html 7KB
CMAKE_XCODE_ATTRIBUTE_an-attribute.html 7KB
共 2000 条
- 1
- 2
- 3
- 4
- 5
- 6
- 20
资源评论
程序员Chino的日记
- 粉丝: 2948
- 资源: 4万+
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功