4.1 Power pin recommendations
Table 3. Power and ground pin termination checklist
Signal name Signal type Used Not used Completed
AV
DD
_CGA1 I Power supply for cluster group A PLL 1 supply (1.8 V
through a filter)
Must remain
powered
AV
DD
_D1 I Power supply for DDR1 PLL (1.8 V through a filter) Must remain
powered
AV
DD
_SD1_PLL1 I Power supply for SerDes1 PLL 1 (SerDes, filtered from
X1VDD) (1.35 V)
Must remain
powered (no
need to filter
from
X1VDD)
AV
DD
_SD1_PLL2 I Power supply for SerDes1 PLL 2 (SerDes, filtered from
X1VDD) (1.35 V)
Must remain
powered (no
need to filter
from
X1VDD)
V
DD
I Core and platform supply voltage (1.0 V)
S1V
DD
I Core power supply for the SerDes logic transceiver (1.0
V)
Must remain
powered
DV
DD
I DUART1/2, I2C, DMA, QE, LPUART1,LPUART2_SOUT/
SIN, LPUART4, GPIO1, GPIO4,GIC (IRQ
3/4/5/6/7/8/9/10), FTM 3/8, USB Control(DRVVBUS,
PWRFAULT), FTM4_CH0/1/2/3/4/5 (3.3 V / 1.8 V)
Must remain
powered
G1V
DD
I Power supply for the DDR3L/DDR4 (1.35 V / 1.2 V) Must remain
powered
TV
DD
I Ethernet management interface 2 (EMI2) (1.2 V / 1.8 V /
2.5 V)
Must remain
powered
LV
DD
I Ethernet Interface 1/2, Ethernet management interface 1
(EMI1), TSEC_1588, GPIO1, GPIO3,FTM1/2, GIC
(IRQ11) (2.5 V/1.8 V)
Must remain
powered
OV
DD
I IFC, SPI, GIC (IRQ 0/1/2), Temper_Detect, System
control and power management, SYSCLK,DDR_CLK,
DIFF_SYSCLK, GPIO2, GPIO1,eSDHC[4-7]/VS/
DAT123_DIR/DAT0_DIR/CMD_DIR/SYNC), Debug,
SYSCLK, JTAG, RTC, FTM5/6/7,POR signals (1.8 V)
Must remain
powered
X1VDD I Pad power supply for the SerDes transceiver (1.35 V) Must remain
powered
TA_PROG_SFP I Should only be supplied 1.8V during secure boot programming. For
normal operation, this pin needs to be tied to GND.
USB_HV
DD
I USB PHY Transceiver supply (3.3 V) Must remain
powered
SENSEVDD O V
DD
sense pin Do not
connect.
This pins
should be
left floating.
GND I Ground Tie to GND
Table continues on the next page...
Power design recommendations
LS1043A Design Checklist , Rev. A, 05/2015
Freescale Semiconductor, Inc.
Preliminary
5
Freescale Confidential Proprietary - Non-Disclosure Agreement required
评论0
最新资源