没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
Application Note: SY8286A
High Efficiency Fast Response
6A, 23V Input Synchronous Step Down Regulator
General Description Features
The SY8286A develops a high efficiency synchronous
step-down DC-DC regulator capable of delivering 6A
current. The device integrates main switch and
synchronous switch with very low R
DS(ON)
to minimize
the conduction loss.
The SY8286A operates over a wide input voltage range
from 4V to 23V. The DC-DC regulator adopts the instant
PWM architecture to achieve fast transient responses for
high step down applications and high efficiency at light
load. The device provides various protection features for
reliable operation. In addition, it operates at pseudo-
constant frequency of 600kHz to minimize the size of
inductor and capacitor.
Ordering Information
SY8286
□
(
□□
)
□
Temperature Code
Package Code
Optional Spec Code
Ordering Number Package type Note
SY8286ARAC QFN3x3-20 --
• Low R
DS(ON)
for internal switches (top/bottom):
38/19 mΩ
• Wide input voltage range: 4-23V
• Instant PWM architecture to achieve fast transient
responses
• Internal 1.3ms soft-start limits the inrush current
• Pseudo-constant frequency: 600kHz.
• 6A output current capability
• +/-1% internal reference voltage
• PFM/PWM selectable light l ad peration mode
• Optional bypass input
• Power good indicator
• Output discharge function
• Output current limit protection
• Hiccup mode output short circuit protection
• Output over voltage protection
• Input UVLO
• Ov r t mperature protection with auto recovery
• RoHS Compliant and Halogen Free
• Compact package: QFN3x3-20
Applications
• LCD-TV/Net-TV/3DTV
• Set Top Box
• Notebook
• High Power AP
Typical Applications
Figure 1 Schematic
AN_SY8286A Rev. 0.9C Silergy Corp. Confidential- Prepared for Customer Use Only 1
SY8286A
Pinout (top view)
(QFN3x3-20)
Top Mark: AWRxyz, (Device code: AWR, x=year code, y=week code, z= lot number code)
Pin Name Pin Number Pin Description
BS 1
Boot-strap pin. Supply high side gate driver. Decouple this pin to LX pin with
0.1uF ceramic capacitor.
IN
2,3,4,5 Input pin. Decouple this pin to GND pin with at least 10uF ceramic cap
LX 6,19,20 Inductor pin. Connect this pin to the switching node of inductor
GND 7,8,18,EP Ground pin
PG
9
Power good Indicator. Open drain output when the output voltage is within 90% to
120% of regulation point.
NC 10, 16 Not connected
EN 11
Enable pin. Pull this pin high to turn on IC. Do not leave this pin floating.
MODE 12
Operating mode selection under light load. Pull this pin low for PFM operating,
and pull this pin high for PWM operation. Do not leave this pin floating
ILMT 13 Output current limit threshold selection.
FB 14 Output feedback pin. Connect to the center point of resistor divider.
BYP
15
External 3.3V bypass power supply input. Decouple this pin to GND with a 1uF
ceramic capac tor. Leave this pin floating if it is not used.
VCC 17
Internal 3.3V LDO output. Power supply for internal analog circuits and driving
circuit. Decouple this pin to GND with a 2.2uF ceramic capacitor.
AN_SY8286A Rev. 0.9C Silergy Corp. Confidential- Prepared for Customer Use Only 2
SY8286A
Block Diagram
IN
Input
UVLO
Current Sense
PG
BS
EN
ILMT
MODE
PWM
LX
Control &
Current Sense
Internal
Protection
SST
Logic
OTP
0.6V
GND
FB
IN
BYP
3.1V
VCC
3.3V LDO
Absolute Maximum Ratings (Note 1)
IN ---------------------------------------------------------------------------------------------------------------------------------
25V
BS-LX ----------------------------------------------------------------------------------------------------------- 4V
EN, ILMT, MODE, PG, LX --------------------------------------------------------------------------------------------------
25V
VCC, FB ----------------------------------------------------------------------------------------------------------- 4V
BYP --------------------------------------------------------------------------------------------------------- 6V
Power Dissipation,
P
D
@ T
A
= 25°C QFN3x3-20 -------------------------------------------------------------------------------------
3.3W
Package Thermal Resistance (Note 2)
θ JA, QFN3x3-20 ------------------------------------------------------------------------------------------------
30°C/W
θ JC, QFN3x3-20 -----------------------------------------------------------------------------------------------
4.5°C/W
Junction Temperature Range ------------------------------------------------------------------------------------------------
150°C
Lead Temperature (Soldering, 10 sec.) ------------------------------------------------------------------------------------
260°C
Storage Temperature Range --------------------------------------------------------------------------------------
-65°C to 150°C
Dynamic LX voltage in 10ns duration --------------------------------------------------------------------- IN+3V to GND-5V
Recommended Operating Conditions (Note 3)
Supply Input Voltage ----------------------------------------------------------------------------------------------------
4V to 23V
Junction Temperature Range ------------------------------------------------------------------------------------- - 40°C to 125°C
Ambient Temperature Range -------------------------------------------------------------------------------------- -40°C to 85°C
AN_SY8286A Rev. 0.9C Silergy Corp. Confidential- Prepared for Customer Use Only 3
剩余15页未读,继续阅读
资源评论
baidu_28702845
- 粉丝: 0
- 资源: 4
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- python-leetcode面试题解之第198题打家劫舍-题解.zip
- python-leetcode面试题解之第191题位1的个数-题解.zip
- python-leetcode面试题解之第186题反转字符串中的单词II-题解.zip
- 一个基于python的web后端高性能开发框架,下载可用
- python-leetcode面试题解之第179题最大数-题解.zip
- python-leetcode面试题解之第170题两数之和III数据结构设计-题解.zip
- python-leetcode面试题解之第168题Excel表列名称-题解.zip
- python-leetcode面试题解之第167题两数之和II输入有序数组-题解.zip
- python-leetcode面试题解之第166题分数到小数-题解.zip
- python-leetcode面试题解之第165比较版本号-题解.zip
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功