/**
******************************************************************************
* @file stm32f1xx_hal_tim.c
* @author MCD Application Team
* @version V1.0.4
* @date 29-April-2016
* @brief TIM HAL module driver
* This file provides firmware functions to manage the following
* functionalities of the Timer (TIM) peripheral:
* + Time Base Initialization
* + Time Base Start
* + Time Base Start Interruption
* + Time Base Start DMA
* + Time Output Compare/PWM Initialization
* + Time Output Compare/PWM Channel Configuration
* + Time Output Compare/PWM Start
* + Time Output Compare/PWM Start Interruption
* + Time Output Compare/PWM Start DMA
* + Time Input Capture Initialization
* + Time Input Capture Channel Configuration
* + Time Input Capture Start
* + Time Input Capture Start Interruption
* + Time Input Capture Start DMA
* + Time One Pulse Initialization
* + Time One Pulse Channel Configuration
* + Time One Pulse Start
* + Time Encoder Interface Initialization
* + Time Encoder Interface Start
* + Time Encoder Interface Start Interruption
* + Time Encoder Interface Start DMA
* + Commutation Event configuration with Interruption and DMA
* + Time OCRef clear configuration
* + Time External Clock configuration
@verbatim
==============================================================================
##### TIMER Generic features #####
==============================================================================
[..] The Timer features include:
(#) 16-bit up, down, up/down auto-reload counter.
(#) 16-bit programmable prescaler allowing dividing (also on the fly) the
counter clock frequency either by any factor between 1 and 65536.
(#) Up to 4 independent channels for:
(++) Input Capture
(++) Output Compare
(++) PWM generation (Edge and Center-aligned Mode)
(++) One-pulse mode output
##### How to use this driver #####
==============================================================================
[..]
(#) Initialize the TIM low level resources by implementing the following functions
depending from feature used :
(++) Time Base : HAL_TIM_Base_MspInit()
(++) Input Capture : HAL_TIM_IC_MspInit()
(++) Output Compare : HAL_TIM_OC_MspInit()
(++) PWM generation : HAL_TIM_PWM_MspInit()
(++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
(++) Encoder mode output : HAL_TIM_Encoder_MspInit()
(#) Initialize the TIM low level resources :
(##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
(##) TIM pins configuration
(+++) Enable the clock for the TIM GPIOs using the following function:
__HAL_RCC_GPIOx_CLK_ENABLE();
(+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
(#) The external Clock can be configured, if needed (the default clock is the
internal clock from the APBx), using the following function:
HAL_TIM_ConfigClockSource, the clock configuration should be done before
any start function.
(#) Configure the TIM in the desired functioning mode using one of the
Initialization function of this driver:
(++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
(++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
Output Compare signal.
(++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
PWM signal.
(++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
external signal.
(++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
in One Pulse Mode.
(++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
(#) Activate the TIM peripheral using one of the start functions depending from the feature used:
(++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
(++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
(++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
(++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
(++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
(++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
(#) The DMA Burst is managed with the two following functions:
HAL_TIM_DMABurst_WriteStart()
HAL_TIM_DMABurst_ReadStart()
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @defgroup TIM TIM
* @brief TIM HAL module driver
* @{
*/
#ifdef HAL_TIM_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @defgroup TIM_Private_Functions TIM Private Functions
* @{
*/
static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_I
没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
收起资源包目录
DAPLink 程序源码,用GCC编译 (1330个子文件)
libpower_hardabi.a 61KB
build_release.bat 3KB
launch_uvision.bat 2KB
astyle.bat 1KB
post_build_script.bat 1KB
pre_build_script.bat 1KB
stm32f1xx_hal_tim.c 160KB
usb_lib.c 130KB
fsl_usart_cmsis.c 104KB
USART_LPC43xx.c 92KB
fsl_edma.c 87KB
fsl_uart_cmsis.c 85KB
rtx_evr.c 76KB
fsl_i2c_mod.c 75KB
SEGGER_RTT.c 71KB
stm32f1xx_hal_usart.c 63KB
stm32f1xx_hal_uart.c 62KB
stm32f1xx_hal_tim_ex.c 61KB
fsl_clock.c 61KB
rtx_thread.c 56KB
fsl_uart.c 55KB
fsl_clock.c 54KB
DAP.c 53KB
flash_blob.c 50KB
flash_blob.c 49KB
stm32f1xx_hal_rcc.c 46KB
m480_clk.c 46KB
lpc43xx_cgu.c 45KB
m480_rtc.c 42KB
fsl_dma.c 41KB
fsl_usart.c 38KB
stm32f1xx_hal_flash_ex.c 36KB
fsl_flash.c 35KB
usbd_core.c 32KB
usbd_msc.c 32KB
system_LPC43xx.c 32KB
stm32f1xx_hal_rcc_ex.c 31KB
usbd_cdc_acm.c 30KB
rtx_msgqueue.c 30KB
stm32f1xx_hal_flash.c 30KB
vfs_manager.c 29KB
nrfx_twis.c 29KB
USART_nRF52820.c 28KB
swd_host.c 28KB
virtual_fs.c 27KB
fsl_tpm.c 27KB
usb_config.c 26KB
usb_config.c 26KB
usb_config.c 26KB
usb_config.c 26KB
usb_config.c 26KB
usb_config.c 26KB
usb_config.c 26KB
usb_config.c 26KB
usb_config.c 26KB
usb_config.c 26KB
usb_config.c 26KB
usb_config.c 26KB
usb_config.c 25KB
vfs_user.c 25KB
usbd_ATSAM3U2C.c 25KB
m480_uart.c 24KB
usbd_nRF528xx.c 23KB
stm32f1xx_hal_dma.c 23KB
usbd_LPC43xx_USB0.c 23KB
usbd_LPC55xx.c 23KB
rtx_lib.c 23KB
m480_fmc.c 23KB
fsl_iap.c 22KB
swd_host_ca.c 22KB
usbd_m480.c 22KB
stm32f1xx_hal_gpio.c 22KB
usbd_MK26F.c 22KB
usbd_SAM3U2C.c 22KB
rtx_mempool.c 21KB
nrfx_clock.c 21KB
flash_blob.c 21KB
stm32f1xx_hal_cortex.c 21KB
usbd_kinetis.c 21KB
system_LPC11Uxx.c 20KB
system_SAM3U.c 20KB
usbd_LPC11Uxx.c 20KB
SWO.c 19KB
stm32f1xx_hal.c 19KB
usbd_STM32F103.c 19KB
rtx_kernel.c 18KB
flash_blob.c 18KB
fsl_ctimer.c 18KB
i2c_commands.c 18KB
rtx_evflags.c 17KB
DAP_UART.c 17KB
main_interface.c 17KB
rtx_mutex.c 17KB
usbd_max32625.c 17KB
microbitv2.c 16KB
JTAG_DP.c 16KB
uart.c 16KB
usbd_hid.c 16KB
system_stm32f1xx.c 16KB
usbd_max32620.c 15KB
共 1330 条
- 1
- 2
- 3
- 4
- 5
- 6
- 14
资源评论
awong007
- 粉丝: 0
- 资源: 6
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功