STM32、51单片机程序代码，项目代码参考.zip

TMS320C2000 Hex Converter v18.1.4.LTS Tools Copyright (c) 1996-2018 Texas Instruments Incorporated Usage: G:\CCS\ccsv8\tools\compiler\ti-cgt-c2000_18.1.4.LTS\bin\hex2000 [-options] filename Use 'G:\CCS\ccsv8\tools\compiler\ti-cgt-c2000_18.1.4.LTS\bin\hex2000 -h <option>' for more information on a particular option. Use 'G:\CCS\ccsv8\tools\compiler\ti-cgt-c2000_18.1.4.LTS\bin\hex2000 -h <text>' to search options for information regarding <text>. Option arguments surrounded by [] declare they are optional. Option arguments separated by commas specify that the option's argument must be chosen from those arguments listed. When shown, option arguments and defaults apply to the usage of both long and short option forms. General Options: --byte,-byte Output as bytes rather than target addressing --entrypoint,-e=addr Specify entrypoint address or symbol name --exclude,-exclude=section Exclude section from hex conversion --fill,-fill=val Specify fill value --help,-options,-h Display help --image,-image Select image mode --linkerfill,-linkerfill Include linker fill sections in images --map,-map=file Specify map file name --memwidth,-memwidth=width Specify memory width --order,-order=LS,MS Specify data ordering (endianness) --outfile,-o=file Specify output file names --quiet,-quiet,-q Quiet Operation --romwidth,-romwidth=width Specify rom width --swapbytes,--sb Swap output bytes for 16byte memwidth --zero,-zero,-z Zero based addressing Diagnostics Options: --buffer_diagnostics,-pdb Line buffer diagnostic output --diag_error=id Treat diagnostic <id> as error --diag_remark=id Treat diagnostic <id> as remark --diag_suppress=id Suppress diagnostic <id> --diag_warning=id Treat diagnostic <id> as warning --diag_wrap[=on,off] Wrap diagnostic messages (argument optional, defaults to: on) --display_error_number Emit diagnostic identifier numbers --emit_warnings_as_errors,-pdew Treat warnings as errors --issue_remarks Issue remarks --no_warnings Suppress warnings --set_error_limit=count Set error limit to <count> Boot Table Options: --boot,-boot Select boot mode --bootorg,-bootorg=addr Specify origin address or symbol of boot table ROM --divsel,-divsel=value Specify the initial value for the DIVSEL register --gpio16,-gpio16 Specify table source as the GP I/O port, 16-bit mode --gpio8,-gpio8,-can8 Specify table source as the GP I/O port, 8-bit mode --i2c8,-i2c8 Specify I2C port as source of boot table loader --i2cclkh,-i2cclkh=value Specify the initial value for I2CCLKH register --i2cclkl,-i2cclkl=value Specify the initial value for the I2CCLKL register --i2cpsc,-i2cpsc=value Specify the initial value for I2CPSC register --lospcp,-lospcp=value Specify the initial value for the LOSPCP register --pllcr,-pllcr=value Specify the initial value for the PLLCR register --sci8,-sci8 Specify table source as the SCI-A port, 8-bit mode --spi8,-spi8 Specify table source as the SPI-A port, 8-bit mode --spibrr,-spibrr=value Specify the initial value for the SPIBRR register --xintcnf2,-xintcnf2=value Specify the initial value for the XINTCNF2 register --xintf16,-xintf16 Specify parallel XINTF stream, 16-bit mode --xintf8,-xintf8 Specify parallel XINTF stream, 8-bit mode --xtiming,-xtiming=value Specify the initial value for the XTIMING register Output Format Options: --array Array output format --ascii,-a Output ASCII hex format --binary,-b Binary output format (for DSKs) --intel,-i Output Intel hex format --motorola,-m[=1,2,3] Output Motorola S hex format --tektronix,-x Output Extended Tektronix hex format --ti_tagged,-t Output TI-Tagged hex format --ti_txt Output TI-TXT hex format Load Image Options: --host_image Output Host Image Object format --host_image:endianness=big,little Select the endianness of the host image object file --host_image:hidden_symbols Determine the visibility of symbols copied in host images --host_image:hide=string Explicitly make a host image symbol hidden --host_image:show=string Explicitly make a host image symbol visible --host_image:target=ARM,MSP430,C2000,C6000,ARP32,PRU Machine type of the host image object file --load_image Output Load Image Object format --section_name_prefix=string Prefix for load/host image object sections Additional Array Format Options: --array:name_prefix=string Prefix for output array names